[Kwintv] kdetv doesnt recognize my card
birbilis
birbilis at gmail.com
Tue Jul 5 20:45:29 CEST 2005
i dont think its the v4l because i have included it in my /etc/X11/xorg.conf::
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "v4l"
EndSection
is there anything else i can do?
any help is appreciated.
On 7/5/05, ghkilo <ghkilo at t-online.de> wrote:
> birbilis schrieb:
>
> >i'm terribly sorry...
> >my card is prolink pixelview playtv pro based on the bt878 chip.
> >my lsmod gives me::
> >
> >bash-2.05b# lsmod
> >Module Size Used by
> >smbfs 64632 0
> >snd_pcm_oss 50208 0
> >snd_mixer_oss 19072 1 snd_pcm_oss
> >tuner 22564 0
> >bttv 150224 0
> >video_buf 18564 1 bttv
> >firmware_class 8960 1 bttv
> >i2c_algo_bit 9992 1 bttv
> >v4l2_common 5760 1 bttv
> >btcx_risc 5000 1 bttv
> >tveeprom 12696 1 bttv
> >i2c_core 19968 4 tuner,bttv,i2c_algo_bit,tveeprom
> >videodev 8704 1 bttv
> >snd_cmipci 29440 0
> >snd_pcm 85124 2 snd_pcm_oss,snd_cmipci
> >snd_page_alloc 8708 1 snd_pcm
> >snd_opl3_lib 10240 1 snd_cmipci
> >snd_timer 22788 2 snd_pcm,snd_opl3_lib
> >snd_hwdep 8608 1 snd_opl3_lib
> >snd_mpu401_uart 7552 1 snd_cmipci
> >snd_rawmidi 21536 1 snd_mpu401_uart
> >snd_seq_device 7948 2 snd_opl3_lib,snd_rawmidi
> >snd 49380 10
> >snd_pcm_oss,snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> >
> >
> >
> >(bttv module is loaded)
> >
> >and my lspci gves me::
> >
> >0000:03:09.0 Multimedia video controller: Brooktree Corporation Bt878
> >Video Capture (rev 11)
> >0000:03:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio
> >Capture (rev 11)
> >
> >thnx a lot for the interest. I have tryed both emerging kdetv and
> >compiling from the sources but nothing works. kdetv says no devices
> >found.
> >
> >i hope i have been complete.
> >
> >On 7/5/05, ghkilo <ghkilo at t-online.de> wrote:
> >
> >
> >>Hello,
> >>
> >>please tell the community more about your tv-card, because many
> >>tvv-cards with an BT8x8 Chip are around teh world.
> >>
> >>Tuner:
> >>BT/CX: BT878
> >>Mnaufacturer:
> >>
> >>Not more is needed to help you.
> >>
> >>best regards gerhard
> >>
> >>
> >>
> >_______________________________________________
> >kwintv mailing list
> >kwintv at kde.org
> >https://mail.kde.org/mailman/listinfo/kwintv
> >
> >
> >
> Thanks,
>
> it seems no recognition by missing V4L or V4L2 modules.
> Kdetv needs one of them, libzvbi also for Videotextplugin enabled.
>
> The V4L drivers should installed an loaded in "X11Conf, or XF86Config-4"
>
> happy installing
>
> Gerhard
> _______________________________________________
> kwintv mailing list
> kwintv at kde.org
> https://mail.kde.org/mailman/listinfo/kwintv
>
More information about the kwintv
mailing list