Trouble compiling KMM 5.0 and Master Branch on new Fedora 29 system
Brendan Coupe
brendan at coupeware.com
Mon Nov 12 20:24:46 GMT 2018
I figured it out. After trying many manual and script based builds I
started to see a pattern. It only failed to build when it was in the
directory that my script created with a date/time stamp. I've been using
this script for 10+ years without a problem. The download directory names
looked like this:
kmymoney-MASTER-2018.11.12-13:15:37
Simply changing the : to . solve the cmake problem.
kmymoney-MASTER-2018.11.12-13.15.37
Sometimes I really hate computers.
Thanks for all of your help Jack.
----
Brendan Coupe
On Sun, Nov 11, 2018 at 4:53 PM Jack <ostroffjh at users.sourceforge.net>
wrote:
> On 2018.11.10 20:25, Brendan Coupe wrote:
> > I'm not sure I explained what I've tried well enough for you to
> > understand. While I normally use compile and install scripts that I
> > wrote a long time ago (used with cvs and svn) I tried compiling from
> > the official tar file for the recently released 5.0.2. It worked fine
> > on both my older upgraded (F28 to F29) and on my new clean F29
> > install.
> >
> > I think this means my systems are fine.
> >
> > I just manually downloaded both the master and 5.0 branches from the
> > KMM git web site. Both compile fine. When I run the git clone command
> > that is in my script and then run cmake, it fails just like I
> > mentioned in my original email. Except for how I download the source
> > code, I'm running the exact same steps that I use for the manually
> > downloaded zip versions of KMM (5.0.2 release, 5.0 branch & master
> > branch) and they all succeed.
> >
> > When I compare the size of the source code directories, all of the
> > zip files result in about 21k of source files. The git downloaded
> > folder is about 70k. I suspect git is the problem and it may not be
> > related to F29 since I started having problems compiling from source
> > several weeks before I upgraded to F29. There is a .git directory in
> > the git clone directory that is about 49k so it's probably the
> > difference.
> You could do a diff -r comparing the source dir from the zip/tar and
> the source downloaded from git. The only difference (off the top of my
> head) should be the presence of the .git directory, as you suspect. If
> there are other differences, see what they are. Be sure that the zip
> and git are both at the same commit of the same branch, which I think
> you are already doing correctly.
>
> > The git command that worked until 4 to 6 weeks ago is:
> >
> > git clone git://anongit.kde.org/kmymoney $BRANCH $KMMDIR
> >
> > Is this correct?
> I don't think so. I don't think (but am not absolutely certain) that
> you shouldn't specify the branch. Do the git clone first (specifying
> the directory is ok) and then do "git checkout branch" to switch.
> Looking at "git clone --help" however, you could also do "git clone URL
> --branch $BRANCH" to not need to do the checkout.
> >
> I'm also still curious whether there is any hint of what went wrong in
> those files or folder after the cmake fails.
>
> In theory, the git and tarball/zip of the same branch/commit should be
> identical, so the issue may be either that the git clone does have some
> difference, or that cmake is possibly aware it is running in a git
> repository and doing something different. (I think the latter is
> unlikely, but I'm grabbing at straws here.)
>
> Jack
> > ----
> > Brendan Coupe
> >
> >
> > On Sat, Nov 10, 2018 at 3:44 PM Jack <ostroffjh at users.sourceforge.net>
> > wrote:
> >
> > > On 2018.11.10 13:35, Brendan Coupe wrote:
> > > > I downloaded the source for 5.0.2 and compiled it without any
> > > > problems. I
> > > > tried the 5.0 and master branches again and they failed on iCal
> > again.
> > > > Seems that there is something off with the source on git???
> > > I doubt there is actually anything "wrong." I suspect some bad
> > > interaction caused by F29 using a newer version of some tool.
> > Again -
> > > right after you get the failure, have you checked the files and
> > > directory I suggested? I'll also try compiling from git head with
> > gcc
> > > 8.
> > >
> > > >
> > > > ----
> > > > Brendan Coupe
> > > >
> > > >
> > > > On Thu, Nov 8, 2018 at 11:44 AM Jack
> > <ostroffjh at users.sourceforge.net>
> > > > wrote:
> > > >
> > > > > I am able to run cmake (3.11.4) with gcc 8.2.0, with either
> > make or
> > > > > ninja, with no errors. In your build directory, is there
> > anything
> > > > > useful in CMakeFiles/CMakeOutput.log or CMakeError.log? Also
> > look
> > > > in
> > > > > CMakeTmp/
> > > > >
> > > > > Another possible approach: cmake --all-other-parameters
> > > > > --trace-source=/path/to/source/cmake/modules/FindLinical.cmake
> > > > > --debug-trycompile /path/to/source
> > > > > Then see if anything useful shows up in the above places.
> > > > >
> > > > > On 2018.11.07 20:29, Brendan Coupe wrote:
> > > > > > Fedora got 5.0.1 to compile so there must be some hope:-)
> > > > > >
> > > > > > I added the --debug-output option to cmake. The output from
> > just
> > > > after
> > > > > > the weboob errors are copied below:
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > >
> > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > (try_run):
> > > > > > Policy CMP0066 is not set: Honor per-config flags in
> > > > try_compile()
> > > > > > source-file signature. Run "cmake --help-policy CMP0066"
> > for
> > > > policy
> > > > > > details. Use the cmake_policy command to set the policy and
> > > > > > suppress this
> > > > > > warning.
> > > > > >
> > > > > > For compatibility with older versions of CMake, try_compile
> > is
> > > > not
> > > > > > honoring
> > > > > > caller config-specific compiler flags (e.g.
> > > > CMAKE_C_FLAGS_DEBUG)
> > > > > > in the
> > > > > > test project.
> > > > > > Call Stack (most recent call first):
> > > > > > CMakeLists.txt:242 (find_package)
> > > > > > This warning is for project developers. Use -Wno-dev to
> > suppress
> > > > it.
> > > > > >
> > > > > > Called from: [2]
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > (try_run):
> > > > > > Policy CMP0056 is not set: Honor link flags in try_compile()
> > > > > > source-file
> > > > > > signature. Run "cmake --help-policy CMP0056" for policy
> > > > details.
> > > > > > Use the
> > > > > > cmake_policy command to set the policy and suppress this
> > > > warning.
> > > > > >
> > > > > > For compatibility with older versions of CMake, try_compile
> > is
> > > > not
> > > > > > honoring
> > > > > > caller link flags (e.g. CMAKE_EXE_LINKER_FLAGS) in the test
> > > > > > project.
> > > > > > Call Stack (most recent call first):
> > > > > > CMakeLists.txt:242 (find_package)
> > > > > > This warning is for project developers. Use -Wno-dev to
> > suppress
> > > > it.
> > > > > >
> > > > > > Called from: [2]
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > (try_run):
> > > > > > Policy CMP0067 is not set: Honor language standard in
> > > > try_compile()
> > > > > > source-file signature. Run "cmake --help-policy CMP0067"
> > for
> > > > policy
> > > > > > details. Use the cmake_policy command to set the policy and
> > > > > > suppress this
> > > > > > warning.
> > > > > >
> > > > > > For compatibility with older versions of CMake, try_compile
> > is
> > > > not
> > > > > > honoring
> > > > > > language standard variables in the test project:
> > > > > >
> > > > > > CMAKE_CXX_STANDARD
> > > > > > CMAKE_CXX_STANDARD_REQUIRED
> > > > > > CMAKE_CXX_EXTENSIONS
> > > > > >
> > > > > > Call Stack (most recent call first):
> > > > > > CMakeLists.txt:242 (find_package)
> > > > > > This warning is for project developers. Use -Wno-dev to
> > suppress
> > > > it.
> > > > > >
> > > > > > Called from: [2]
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > CMake Error at cmake/modules/FindLibical.cmake:75 (message):
> > > > > > Unable to compile or run the libical version detection
> > program.
> > > > > > Call Stack (most recent call first):
> > > > > > CMakeLists.txt:242 (find_package)
> > > > > >
> > > > > >
> > > > > > Called from: [2]
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > -- Configuring incomplete, errors occurred!
> > > > > > See also
> > > > > >
> > > > >
> > > >
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeOutput.log".
> > > > > > See also
> > > > > >
> > > > >
> > > >
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeError.log".
> > > > > > make: *** No targets specified and no makefile found. Stop.
> > > > > >
> > > > > > =============================================================
> > > > > >
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > -- Found PythonLibs: //lib64/libpython2.7.so (found suitable
> > > > version
> > > > > > "2.7.15", minimum required is "2.7.15")
> > > > > > Called from: [4]
> > > > /usr/share/cmake/Modules/FindPackageMessage.cmake
> > > > > > [3]
> > > > > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > [2]
> > /usr/share/cmake/Modules/FindPythonLibs.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > > > > Called from: [4]
> > > > > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > [3]
> > > > > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > [2]
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindPythonModule.cmake
> > > > > > [1]
> > > > > >
> > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > -- Configuring incomplete, errors occurred!
> > > > > >
> > > > > >
> > > > > > ----
> > > > > > Brendan Coupe
> > > > > > On Wed, Nov 7, 2018 at 5:42 PM Jack
> > > > <ostroffjh at users.sourceforge.net>
> > > > > > wrote:
> > > > > > >
> > > > > > > On 2018.11.07 19:22, Brendan Coupe wrote:
> > > > > > > > weboob errors seem to be unfixable in Fedora. I think they
> > > > have
> > > > > > been
> > > > > > > > around for a while, I found them in previous requests for
> > > > help. I
> > > > > > > > don' think they have anything to do with the compile
> > failing.
> > > > not
> > > > > > > > sure if they cause any of the weird behavior I was
> > seeing. I
> > > > will
> > > > > > try
> > > > > > > > to resurrect an old F28 system. I'm hoping the repos have
> > > > 5.0.2
> > > > > > soon
> > > > > > > > since I'm currently running 5.0.1 and dealing with old
> > > > problems
> > > > > > that
> > > > > > > > have been fixed.
> > > > > > > I agree weboob is not relevant here.
> > > > > > > >
> > > > > > > > Is this the detection program you are talking about:
> > > > > > > > cmake/modules/FindLibical.cmake
> > > > > > > No, the .cmake program tells cmake where to look for stuff,
> > and
> > > > how
> > > > > > to
> > > > > > > set various variables used later in the cmake run. To
> > actually
> > > > > > check,
> > > > > > > cmake creates a .c program (using hints and info from the
> > .cmake
> > > > > > file,
> > > > > > > and then tries to compile and link it. (Some checks might
> > be
> > > > done
> > > > > > with
> > > > > > > pkg_config) Normally that fails if libical isn't found, or
> > > > isn't a
> > > > > > > high enough version, for example. Your error says " Unable
> > to
> > > > > > compile
> > > > > > > or run the libical version detection program." which seems
> > like
> > > > a
> > > > > > > different sort of problem. I would look through the cmake
> > > > --help
> > > > > > > output to see what parameters might provide additional
> > details
> > > > about
> > > > > > > what is actually failing.
> > > > > > > >
> > > > > > > > Line 75 is the source of the message.
> > > > > > > > gcc.x86_64 8.2.1-4.fc29
> > > > > > > > @updates
> > > > > > > > gcc-c++.x86_64 8.2.1-4.fc29
> > > > > > > > @updates
> > > > > > > > gcc-gdb-plugin.x86_64 8.2.1-4.fc29
> > > > > > > > @updates
> > > > > > > > libgcc.x86_64 8.2.1-4.fc29
> > > > > > > > @updates
> > > > > > > This, however, might be the issue. I'll have to try
> > installing
> > > > gcc
> > > > > > 8
> > > > > > > and see how it works for me. As a temporary fix, you might
> > try
> > > > > > using
> > > > > > > gcc 7.
> > > > > > >
> > > > > > > Jack
> > > > > > > >
> > > > > > > > ----
> > > > > > > > Brendan Coupe
> > > > > > > > On Wed, Nov 7, 2018 at 4:47 PM Jack
> > > > > > <ostroffjh at users.sourceforge.net>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > Hello Brendan,
> > > > > > > > >
> > > > > > > > > On 2018.11.07 18:17, Brendan Coupe wrote:
> > > > > > > > > > I have been compiling from source for 10+ years. I had
> > > > been
> > > > > > able
> > > > > > > > to
> > > > > > > > > > compile both the master branch and the 5.0 branch on
> > my
> > > > > > Fedora 28
> > > > > > > > > > system until a month or so ago. I was having some
> > weird
> > > > > > behavior
> > > > > > > > in
> > > > > > > > > > KMM5 that was not affecting a clean Fedora 28 test VM
> > > > running
> > > > > > KMM
> > > > > > > > > > from the repos so I decided to build a new clean
> > Fedora 29
> > > > > > system.
> > > > > > > > > It may be worth checking the release notes for Fedora
> > 29 to
> > > > see
> > > > > > what
> > > > > > > > > changed, and if anything looks possibly relevant.
> > > > > > > > >
> > > > > > > > > > I also upgraded the old system from Fedora 28 to 29.
> > Both
> > > > > > systems
> > > > > > > > > > fail at the same point while compiling from the master
> > > > and 5.0
> > > > > > > > > > branches:
> > > > > > > > > It certainly sounds like some difference between 28 and
> > 29
> > > > is
> > > > > > behind
> > > > > > > > > the failure.
> > > > > > > > >
> > > > > > > > > > -- Found LibOfx:
> > > > > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID
> > > > > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID - Success
> > > > > > > > > > -- Found PythonInterp: /usr/bin/python2 (found
> > suitable
> > > > > > version
> > > > > > > > > > "2.7.15", minimum required is "2.6")
> > > > > > > > > > -- Found PythonLibs: /usr/lib64/libpython2.7.so (found
> > > > > > suitable
> > > > > > > > > > version "2.7.15", minimum required is "2.7.15")
> > > > > > > > > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > > > > > > > I'm assuming this is not an issue for you.
> > > > > > > > > > CMake Error at cmake/modules/FindLibical.cmake:75
> > > > (message):
> > > > > > > > > > Unable to compile or run the libical version
> > detection
> > > > > > program.
> > > > > > > > > This does seem odd. It appears not even getting to the
> > > > point of
> > > > > > > > > actually checking for an installed libical.
> > > > > > > > > > Call Stack (most recent call first):
> > > > > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > > > > At the point of failure, check in the build directory.
> > > > Often
> > > > > > you
> > > > > > > > can
> > > > > > > > > find the libical version detection program (I've
> > forgotten
> > > > > > whether
> > > > > > > > it
> > > > > > > > > leaves the .c program around, and see if configure.log
> > (or
> > > > > > something
> > > > > > > > > like it) might have a more detailed reason for the
> > failure
> > > > to
> > > > > > > > compile
> > > > > > > > > that .c program.
> > > > > > > > >
> > > > > > > > > Not sure if it might be relevant, but what version of
> > gcc
> > > > are
> > > > > > you
> > > > > > > > > using, both in F28 and in F29?
> > > > > > > > > >
> > > > > > > > > > -- Configuring incomplete, errors occurred!
> > > > > > > > > > ========================================
> > > > > > > > > >
> > > > > > > > > > libical appears to be installed:
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > dnf list installed | grep libical
> > > > > > > > > > libical.x86_64
> > > > > > > > 3.0.3-7.fc29
> > > > > > > > > > @fedora
> > > > > > > > > > libical-devel.x86_64
> > > > > > > > 3.0.3-7.fc29
> > > > > > > > > > @fedora
> > > > > > > > > >
> > > > > > > > > > Any ideas?
> > > > > > > > > >
> > > > > > > > > > Thanks,
> > > > > > > > > >
> > > > > > > > > > ----
> > > > > > > > > > Brendan Coupe
> > > > > > > > > Jack
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/kmymoney-devel/attachments/20181112/e9ba658a/attachment-0001.html>
More information about the KMyMoney-devel
mailing list