Trouble compiling KMM 5.0 and Master Branch on new Fedora 29 system
Jack
ostroffjh at users.sourceforge.net
Mon Nov 12 21:27:10 GMT 2018
OK, I've now been able to duplicate it - it does NOT happen if the
build directory is not under the source directory. It does happen if
the build directory is under the source directory. I still haven't
figured out exactly what is failing, but I finally do see the relevant
files left under CMakeFiles/CMakeTmp.
On 2018.11.12 15:24, Brendan Coupe wrote:
> I figured it out. After trying many manual and script based builds I
> started to see a pattern. It only failed to build when it was in the
> directory that my script created with a date/time stamp. I've been
> using
> this script for 10+ years without a problem. The download directory
> names
> looked like this:
>
> kmymoney-MASTER-2018.11.12-13:15:37
>
> Simply changing the : to . solve the cmake problem.
>
> kmymoney-MASTER-2018.11.12-13.15.37
>
> Sometimes I really hate computers.
>
> Thanks for all of your help Jack.
>
> ----
> Brendan Coupe
>
>
> On Sun, Nov 11, 2018 at 4:53 PM Jack <ostroffjh at users.sourceforge.net>
> wrote:
>
> > On 2018.11.10 20:25, Brendan Coupe wrote:
> > > I'm not sure I explained what I've tried well enough for you to
> > > understand. While I normally use compile and install scripts that
> I
> > > wrote a long time ago (used with cvs and svn) I tried compiling
> from
> > > the official tar file for the recently released 5.0.2. It worked
> fine
> > > on both my older upgraded (F28 to F29) and on my new clean F29
> > > install.
> > >
> > > I think this means my systems are fine.
> > >
> > > I just manually downloaded both the master and 5.0 branches from
> the
> > > KMM git web site. Both compile fine. When I run the git clone
> command
> > > that is in my script and then run cmake, it fails just like I
> > > mentioned in my original email. Except for how I download the
> source
> > > code, I'm running the exact same steps that I use for the manually
> > > downloaded zip versions of KMM (5.0.2 release, 5.0 branch & master
> > > branch) and they all succeed.
> > >
> > > When I compare the size of the source code directories, all of the
> > > zip files result in about 21k of source files. The git downloaded
> > > folder is about 70k. I suspect git is the problem and it may not
> be
> > > related to F29 since I started having problems compiling from
> source
> > > several weeks before I upgraded to F29. There is a .git directory
> in
> > > the git clone directory that is about 49k so it's probably the
> > > difference.
> > You could do a diff -r comparing the source dir from the zip/tar and
> > the source downloaded from git. The only difference (off the top
> of my
> > head) should be the presence of the .git directory, as you
> suspect. If
> > there are other differences, see what they are. Be sure that the
> zip
> > and git are both at the same commit of the same branch, which I
> think
> > you are already doing correctly.
> >
> > > The git command that worked until 4 to 6 weeks ago is:
> > >
> > > git clone git://anongit.kde.org/kmymoney $BRANCH $KMMDIR
> > >
> > > Is this correct?
> > I don't think so. I don't think (but am not absolutely certain)
> that
> > you shouldn't specify the branch. Do the git clone first
> (specifying
> > the directory is ok) and then do "git checkout branch" to switch.
> > Looking at "git clone --help" however, you could also do "git clone
> URL
> > --branch $BRANCH" to not need to do the checkout.
> > >
> > I'm also still curious whether there is any hint of what went wrong
> in
> > those files or folder after the cmake fails.
> >
> > In theory, the git and tarball/zip of the same branch/commit should
> be
> > identical, so the issue may be either that the git clone does have
> some
> > difference, or that cmake is possibly aware it is running in a git
> > repository and doing something different. (I think the latter is
> > unlikely, but I'm grabbing at straws here.)
> >
> > Jack
> > > ----
> > > Brendan Coupe
> > >
> > >
> > > On Sat, Nov 10, 2018 at 3:44 PM Jack
> <ostroffjh at users.sourceforge.net>
> > > wrote:
> > >
> > > > On 2018.11.10 13:35, Brendan Coupe wrote:
> > > > > I downloaded the source for 5.0.2 and compiled it without any
> > > > > problems. I
> > > > > tried the 5.0 and master branches again and they failed on
> iCal
> > > again.
> > > > > Seems that there is something off with the source on git???
> > > > I doubt there is actually anything "wrong." I suspect some bad
> > > > interaction caused by F29 using a newer version of some tool.
> > > Again -
> > > > right after you get the failure, have you checked the files and
> > > > directory I suggested? I'll also try compiling from git head
> with
> > > gcc
> > > > 8.
> > > >
> > > > >
> > > > > ----
> > > > > Brendan Coupe
> > > > >
> > > > >
> > > > > On Thu, Nov 8, 2018 at 11:44 AM Jack
> > > <ostroffjh at users.sourceforge.net>
> > > > > wrote:
> > > > >
> > > > > > I am able to run cmake (3.11.4) with gcc 8.2.0, with either
> > > make or
> > > > > > ninja, with no errors. In your build directory, is there
> > > anything
> > > > > > useful in CMakeFiles/CMakeOutput.log or CMakeError.log?
> Also
> > > look
> > > > > in
> > > > > > CMakeTmp/
> > > > > >
> > > > > > Another possible approach: cmake --all-other-parameters
> > > > > >
> --trace-source=/path/to/source/cmake/modules/FindLinical.cmake
> > > > > > --debug-trycompile /path/to/source
> > > > > > Then see if anything useful shows up in the above places.
> > > > > >
> > > > > > On 2018.11.07 20:29, Brendan Coupe wrote:
> > > > > > > Fedora got 5.0.1 to compile so there must be some hope:-)
> > > > > > >
> > > > > > > I added the --debug-output option to cmake. The output
> from
> > > just
> > > > > after
> > > > > > > the weboob errors are copied below:
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ===========================================================================
> > > > > > >
> > > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > > (try_run):
> > > > > > > Policy CMP0066 is not set: Honor per-config flags in
> > > > > try_compile()
> > > > > > > source-file signature. Run "cmake --help-policy
> CMP0066"
> > > for
> > > > > policy
> > > > > > > details. Use the cmake_policy command to set the
> policy and
> > > > > > > suppress this
> > > > > > > warning.
> > > > > > >
> > > > > > > For compatibility with older versions of CMake,
> try_compile
> > > is
> > > > > not
> > > > > > > honoring
> > > > > > > caller config-specific compiler flags (e.g.
> > > > > CMAKE_C_FLAGS_DEBUG)
> > > > > > > in the
> > > > > > > test project.
> > > > > > > Call Stack (most recent call first):
> > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > > This warning is for project developers. Use -Wno-dev to
> > > suppress
> > > > > it.
> > > > > > >
> > > > > > > Called from: [2]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > > (try_run):
> > > > > > > Policy CMP0056 is not set: Honor link flags in
> try_compile()
> > > > > > > source-file
> > > > > > > signature. Run "cmake --help-policy CMP0056" for policy
> > > > > details.
> > > > > > > Use the
> > > > > > > cmake_policy command to set the policy and suppress this
> > > > > warning.
> > > > > > >
> > > > > > > For compatibility with older versions of CMake,
> try_compile
> > > is
> > > > > not
> > > > > > > honoring
> > > > > > > caller link flags (e.g. CMAKE_EXE_LINKER_FLAGS) in the
> test
> > > > > > > project.
> > > > > > > Call Stack (most recent call first):
> > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > > This warning is for project developers. Use -Wno-dev to
> > > suppress
> > > > > it.
> > > > > > >
> > > > > > > Called from: [2]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> > > > > (try_run):
> > > > > > > Policy CMP0067 is not set: Honor language standard in
> > > > > try_compile()
> > > > > > > source-file signature. Run "cmake --help-policy
> CMP0067"
> > > for
> > > > > policy
> > > > > > > details. Use the cmake_policy command to set the
> policy and
> > > > > > > suppress this
> > > > > > > warning.
> > > > > > >
> > > > > > > For compatibility with older versions of CMake,
> try_compile
> > > is
> > > > > not
> > > > > > > honoring
> > > > > > > language standard variables in the test project:
> > > > > > >
> > > > > > > CMAKE_CXX_STANDARD
> > > > > > > CMAKE_CXX_STANDARD_REQUIRED
> > > > > > > CMAKE_CXX_EXTENSIONS
> > > > > > >
> > > > > > > Call Stack (most recent call first):
> > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > > This warning is for project developers. Use -Wno-dev to
> > > suppress
> > > > > it.
> > > > > > >
> > > > > > > Called from: [2]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > CMake Error at cmake/modules/FindLibical.cmake:75
> (message):
> > > > > > > Unable to compile or run the libical version detection
> > > program.
> > > > > > > Call Stack (most recent call first):
> > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > >
> > > > > > >
> > > > > > > Called from: [2]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > -- Configuring incomplete, errors occurred!
> > > > > > > See also
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeOutput.log".
> > > > > > > See also
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeError.log".
> > > > > > > make: *** No targets specified and no makefile found.
> Stop.
> > > > > > >
> > > > > > >
> =============================================================
> > > > > > >
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > -- Found PythonLibs: //lib64/libpython2.7.so (found
> suitable
> > > > > version
> > > > > > > "2.7.15", minimum required is "2.7.15")
> > > > > > > Called from: [4]
> > > > > /usr/share/cmake/Modules/FindPackageMessage.cmake
> > > > > > > [3]
> > > > > > >
> /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > > [2]
> > > /usr/share/cmake/Modules/FindPythonLibs.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > > > > > Called from: [4]
> > > > > > >
> /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > > [3]
> > > > > > >
> /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > > > > > [2]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindPythonModule.cmake
> > > > > > > [1]
> > > > > > >
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > > > > > -- Configuring incomplete, errors occurred!
> > > > > > >
> > > > > > >
> > > > > > > ----
> > > > > > > Brendan Coupe
> > > > > > > On Wed, Nov 7, 2018 at 5:42 PM Jack
> > > > > <ostroffjh at users.sourceforge.net>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > On 2018.11.07 19:22, Brendan Coupe wrote:
> > > > > > > > > weboob errors seem to be unfixable in Fedora. I think
> they
> > > > > have
> > > > > > > been
> > > > > > > > > around for a while, I found them in previous requests
> for
> > > > > help. I
> > > > > > > > > don' think they have anything to do with the compile
> > > failing.
> > > > > not
> > > > > > > > > sure if they cause any of the weird behavior I was
> > > seeing. I
> > > > > will
> > > > > > > try
> > > > > > > > > to resurrect an old F28 system. I'm hoping the repos
> have
> > > > > 5.0.2
> > > > > > > soon
> > > > > > > > > since I'm currently running 5.0.1 and dealing with old
> > > > > problems
> > > > > > > that
> > > > > > > > > have been fixed.
> > > > > > > > I agree weboob is not relevant here.
> > > > > > > > >
> > > > > > > > > Is this the detection program you are talking about:
> > > > > > > > > cmake/modules/FindLibical.cmake
> > > > > > > > No, the .cmake program tells cmake where to look for
> stuff,
> > > and
> > > > > how
> > > > > > > to
> > > > > > > > set various variables used later in the cmake run. To
> > > actually
> > > > > > > check,
> > > > > > > > cmake creates a .c program (using hints and info from
> the
> > > .cmake
> > > > > > > file,
> > > > > > > > and then tries to compile and link it. (Some checks
> might
> > > be
> > > > > done
> > > > > > > with
> > > > > > > > pkg_config) Normally that fails if libical isn't
> found, or
> > > > > isn't a
> > > > > > > > high enough version, for example. Your error says "
> Unable
> > > to
> > > > > > > compile
> > > > > > > > or run the libical version detection program." which
> seems
> > > like
> > > > > a
> > > > > > > > different sort of problem. I would look through the
> cmake
> > > > > --help
> > > > > > > > output to see what parameters might provide additional
> > > details
> > > > > about
> > > > > > > > what is actually failing.
> > > > > > > > >
> > > > > > > > > Line 75 is the source of the message.
> > > > > > > > > gcc.x86_64
> 8.2.1-4.fc29
> > > > > > > > > @updates
> > > > > > > > > gcc-c++.x86_64
> 8.2.1-4.fc29
> > > > > > > > > @updates
> > > > > > > > > gcc-gdb-plugin.x86_64
> 8.2.1-4.fc29
> > > > > > > > > @updates
> > > > > > > > > libgcc.x86_64
> 8.2.1-4.fc29
> > > > > > > > > @updates
> > > > > > > > This, however, might be the issue. I'll have to try
> > > installing
> > > > > gcc
> > > > > > > 8
> > > > > > > > and see how it works for me. As a temporary fix, you
> might
> > > try
> > > > > > > using
> > > > > > > > gcc 7.
> > > > > > > >
> > > > > > > > Jack
> > > > > > > > >
> > > > > > > > > ----
> > > > > > > > > Brendan Coupe
> > > > > > > > > On Wed, Nov 7, 2018 at 4:47 PM Jack
> > > > > > > <ostroffjh at users.sourceforge.net>
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Hello Brendan,
> > > > > > > > > >
> > > > > > > > > > On 2018.11.07 18:17, Brendan Coupe wrote:
> > > > > > > > > > > I have been compiling from source for 10+ years.
> I had
> > > > > been
> > > > > > > able
> > > > > > > > > to
> > > > > > > > > > > compile both the master branch and the 5.0 branch
> on
> > > my
> > > > > > > Fedora 28
> > > > > > > > > > > system until a month or so ago. I was having some
> > > weird
> > > > > > > behavior
> > > > > > > > > in
> > > > > > > > > > > KMM5 that was not affecting a clean Fedora 28
> test VM
> > > > > running
> > > > > > > KMM
> > > > > > > > > > > from the repos so I decided to build a new clean
> > > Fedora 29
> > > > > > > system.
> > > > > > > > > > It may be worth checking the release notes for
> Fedora
> > > 29 to
> > > > > see
> > > > > > > what
> > > > > > > > > > changed, and if anything looks possibly relevant.
> > > > > > > > > >
> > > > > > > > > > > I also upgraded the old system from Fedora 28 to
> 29.
> > > Both
> > > > > > > systems
> > > > > > > > > > > fail at the same point while compiling from the
> master
> > > > > and 5.0
> > > > > > > > > > > branches:
> > > > > > > > > > It certainly sounds like some difference between 28
> and
> > > 29
> > > > > is
> > > > > > > behind
> > > > > > > > > > the failure.
> > > > > > > > > >
> > > > > > > > > > > -- Found LibOfx:
> > > > > > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID
> > > > > > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID - Success
> > > > > > > > > > > -- Found PythonInterp: /usr/bin/python2 (found
> > > suitable
> > > > > > > version
> > > > > > > > > > > "2.7.15", minimum required is "2.6")
> > > > > > > > > > > -- Found PythonLibs: /usr/lib64/libpython2.7.so
> (found
> > > > > > > suitable
> > > > > > > > > > > version "2.7.15", minimum required is "2.7.15")
> > > > > > > > > > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > > > > > > > > I'm assuming this is not an issue for you.
> > > > > > > > > > > CMake Error at cmake/modules/FindLibical.cmake:75
> > > > > (message):
> > > > > > > > > > > Unable to compile or run the libical version
> > > detection
> > > > > > > program.
> > > > > > > > > > This does seem odd. It appears not even getting to
> the
> > > > > point of
> > > > > > > > > > actually checking for an installed libical.
> > > > > > > > > > > Call Stack (most recent call first):
> > > > > > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > > > > > At the point of failure, check in the build
> directory.
> > > > > Often
> > > > > > > you
> > > > > > > > > can
> > > > > > > > > > find the libical version detection program (I've
> > > forgotten
> > > > > > > whether
> > > > > > > > > it
> > > > > > > > > > leaves the .c program around, and see if
> configure.log
> > > (or
> > > > > > > something
> > > > > > > > > > like it) might have a more detailed reason for the
> > > failure
> > > > > to
> > > > > > > > > compile
> > > > > > > > > > that .c program.
> > > > > > > > > >
> > > > > > > > > > Not sure if it might be relevant, but what version
> of
> > > gcc
> > > > > are
> > > > > > > you
> > > > > > > > > > using, both in F28 and in F29?
> > > > > > > > > > >
> > > > > > > > > > > -- Configuring incomplete, errors occurred!
> > > > > > > > > > > ========================================
> > > > > > > > > > >
> > > > > > > > > > > libical appears to be installed:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > dnf list installed | grep libical
> > > > > > > > > > > libical.x86_64
> > > > > > > > > 3.0.3-7.fc29
> > > > > > > > > > > @fedora
> > > > > > > > > > > libical-devel.x86_64
> > > > > > > > > 3.0.3-7.fc29
> > > > > > > > > > > @fedora
> > > > > > > > > > >
> > > > > > > > > > > Any ideas?
> > > > > > > > > > >
> > > > > > > > > > > Thanks,
> > > > > > > > > > >
> > > > > > > > > > > ----
> > > > > > > > > > > Brendan Coupe
> > > > > > > > > > Jack
> > >
> >
> >
>
More information about the KMyMoney-devel
mailing list