Problems compiling kio project on AMD64
Bernd Lachner
blachner at gmx.de
Sun Jun 5 15:53:41 BST 2005
Hi,
I'm using KDevelop 3.2.1 from KDE 3.4.1.
I created a kio project in KDevelop and tried to compile it. But it
seems, kdevelop is catched in a endless loop and executes configure again
and again.
If I compile the exact same project on 32 Bit Linux withe the same
KDE/KDevelop version on my Laptop it compiles fine.
Btw. If I create a KDE Application on the 64Bit machine it compiles also
fine.
I think it is not really a KDevelop problem. It's mor a autoconf problem,
because if I try to compile the kio slave on the shell it also comes in a
endless configure loop.
If I run configure it seems to work without problems. But if I run make
than, it comes to this endless loop. Below the output of make:
make: *** No targets specified and no makefile found. Stop.
bernd at linux:~/kio_photocd/admin> cd ..
bernd at linux:~/kio_photocd> make
Makefile:846: warning: overriding commands for target `clean-bcheck'
Makefile:809: warning: ignoring old commands for target `clean-bcheck'
Makefile:851: warning: overriding commands for target `bcheck-am'
Makefile:814: warning: ignoring old commands for target `bcheck-am'
make: Warning: File `Makefile.am' has modification time 8.1e+04 s in the
future
cd . && make -f admin/Makefile.common configure.in ;
make[1]: Entering directory `/home/bernd/kio_photocd'
make[1]: Warning: File `admin/Makefile.common' has modification time
8.1e+04 s in the future
make[1]: warning: Clock skew detected. Your build may be incomplete.
make[1]: Leaving directory `/home/bernd/kio_photocd'
cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run aclocal-1.9
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
AM_PATH_SMPEG
run info '(automake)Extending aclocal'
or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run automake-1.9
--gnu
cd . && perl admin/am_edit
cd . && perl admin/am_edit Makefile.in
cd . && rm -f configure
cd . && make -f admin/Makefile.common configure
make[1]: Entering directory `/home/bernd/kio_photocd'
make[1]: Warning: File `admin/Makefile.common' has modification time
8.1e+04 s in the future
make[1]: warning: Clock skew detected. Your build may be incomplete.
make[1]: Leaving directory `/home/bernd/kio_photocd'
/bin/sh ./config.status --recheck
running /bin/sh ./configure --no-create --no-recursion
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde3/bin/kde-config
checking where to install... /opt/kde3 (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wnon-virtual-dtor... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
using lib directory suffix 64
checking for a sed that does not truncate output... /usr/bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/x86_64-suse-linux/bin/ld option to reload object
files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m
elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/x86_64-suse-linux/bin/ld -m
elf_x86_64
checking if the linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) is
GNU ld... yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m
elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m
elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself...
(cached) yes
appending configuration tag "F77" to libtool
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for short... yes
checking size of short... 2
checking for long... yes
checking size of long... 8
checking for char *... yes
checking size of char *... 8
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 8
checking for unsigned long... yes
checking size of unsigned long... 8
checking sizeof size_t == sizeof unsigned long... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/X11R6/lib64, headers /usr/X11R6/include
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... libraries /usr/lib/qt3/lib64,
headers /usr/lib/qt3/include using -mt
checking for moc... /usr/lib/qt3/bin/moc
checking for uic... /usr/lib/qt3/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... libraries /opt/kde3/lib64, headers /opt/kde3/include
checking if UIC has KDE plugins available... yes
checking for KDE paths... defaults
checking for dcopidl... /opt/kde3/bin/dcopidl
checking for dcopidl2cpp... /opt/kde3/bin/dcopidl2cpp
checking for mcopidl... /opt/kde3/bin/mcopidl
checking for artsc-config... /opt/kde3/bin/artsc-config
checking for meinproc... /opt/kde3/bin/meinproc
checking for kconfig_compiler... /opt/kde3/bin/kconfig_compiler
checking for dcopidlng... /opt/kde3/bin/dcopidlng
checking for xmllint... /usr/bin/xmllint
checking whether byte ordering is bigendian... no
checking for MAXPATHLEN... 4096
checking if doc should be compiled... yes
checking if po should be compiled... yes
checking if src should be compiled... yes
configure: creating ./config.status
Good - your configure finished. Start make now
/bin/sh ./config.status
fast creating Makefile
fast creating doc/Makefile
fast creating doc/en/Makefile
fast creating po/Makefile
fast creating src/Makefile
config.pl: fast created 5 file(s).
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
Makefile:846: warning: overriding commands for target `clean-bcheck'
Makefile:809: warning: ignoring old commands for target `clean-bcheck'
Makefile:851: warning: overriding commands for target `bcheck-am'
Makefile:814: warning: ignoring old commands for target `bcheck-am'
make: Warning: File `Makefile.am' has modification time 8.1e+04 s in the
future
cd . && make -f admin/Makefile.common configure.in ;
make[1]: Entering directory `/home/bernd/kio_photocd'
make[1]: Warning: File `admin/Makefile.common' has modification time
8.1e+04 s in the future
make[1]: warning: Clock skew detected. Your build may be incomplete.
make[1]: Leaving directory `/home/bernd/kio_photocd'
cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run aclocal-1.9
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
AM_PATH_SMPEG
run info '(automake)Extending aclocal'
or see
http://sources.redhat.com/automake/automake.html#Extending-aclocal
cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run automake-1.9
--gnu
cd . && perl admin/am_edit
cd . && perl admin/am_edit Makefile.in
cd . && rm -f configure
cd . && make -f admin/Makefile.common configure
make[1]: Entering directory `/home/bernd/kio_photocd'
make[1]: Warning: File `admin/Makefile.common' has modification time
8.1e+04 s in the future
make[1]: warning: Clock skew detected. Your build may be incomplete.
make[1]: Leaving directory `/home/bernd/kio_photocd'
/bin/sh ./config.status --recheck
running /bin/sh ./configure --no-create --no-recursion
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde3/bin/kde-config
checking where to install... /opt/kde3 (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
make: *** [config.status] Error 1
Someone have some tips for me to solve this problem?
--
Bernd Lachner
Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie!
Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
-
to unsubscribe from this list send an email to kdevelop-request at kdevelop.org with the following body:
unsubscribe »your-email-address«
More information about the KDevelop
mailing list