Problems compiling kio project on AMD64
Bernd Lachner
blachner at gmx.de
Sun Jun 5 16:27:52 BST 2005
Ok. I already solved the problem.
It was no kdevelop and not directly a autoconf problem.
When I created this project with kdevelop I directly checked it in to my
CVS server. I think kdevelop works in this case like this:
1) Create project files.
2) Check the files in to the CVS server.
3) Delete the local files.
4) Check out the project.
In my case the date of my compiling station was wrong (a day before my
cvs server). And this causes this problem. Setting the right date and the
problem was solved.
But, nevertheless, it would be better, make and configure dont go in a
endless loop by this kind of date failure.
> --- Ursprüngliche Nachricht ---
> Von: "Bernd Lachner" <blachner at gmx.de>
> An: kdevelop at kdevelop.org
> Betreff: Problems compiling kio project on AMD64
> Datum: Sun, 5 Jun 2005 16:53:41 +0200 (MEST)
>
> Hi,
>
> I'm using KDevelop 3.2.1 from KDE 3.4.1.
>
> I created a kio project in KDevelop and tried to compile it. But it
> seems, kdevelop is catched in a endless loop and executes configure
again
> and again.
>
> If I compile the exact same project on 32 Bit Linux withe the same
> KDE/KDevelop version on my Laptop it compiles fine.
>
> Btw. If I create a KDE Application on the 64Bit machine it compiles
also
> fine.
>
> I think it is not really a KDevelop problem. It's mor a autoconf
problem,
> because if I try to compile the kio slave on the shell it also comes in
a
> endless configure loop.
>
> If I run configure it seems to work without problems. But if I run make
> than, it comes to this endless loop. Below the output of make:
>
> make: *** No targets specified and no makefile found. Stop.
> bernd at linux:~/kio_photocd/admin> cd ..
> bernd at linux:~/kio_photocd> make
> Makefile:846: warning: overriding commands for target `clean-bcheck'
> Makefile:809: warning: ignoring old commands for target `clean-bcheck'
> Makefile:851: warning: overriding commands for target `bcheck-am'
> Makefile:814: warning: ignoring old commands for target `bcheck-am'
> make: Warning: File `Makefile.am' has modification time 8.1e+04 s in
the
> future
> cd . && make -f admin/Makefile.common configure.in ;
> make[1]: Entering directory `/home/bernd/kio_photocd'
> make[1]: Warning: File `admin/Makefile.common' has modification time
> 8.1e+04 s in the future
> make[1]: warning: Clock skew detected. Your build may be incomplete.
> make[1]: Leaving directory `/home/bernd/kio_photocd'
> cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run aclocal-1.9
> /usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
> AM_PATH_SMPEG
> run info '(automake)Extending aclocal'
> or see
> http://sources.redhat.com/automake/automake.html#Extending-aclocal
> cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run
automake-1.9
> --gnu
> cd . && perl admin/am_edit
> cd . && perl admin/am_edit Makefile.in
> cd . && rm -f configure
> cd . && make -f admin/Makefile.common configure
> make[1]: Entering directory `/home/bernd/kio_photocd'
> make[1]: Warning: File `admin/Makefile.common' has modification time
> 8.1e+04 s in the future
> make[1]: warning: Clock skew detected. Your build may be incomplete.
> make[1]: Leaving directory `/home/bernd/kio_photocd'
> /bin/sh ./config.status --recheck
> running /bin/sh ./configure --no-create --no-recursion
> checking build system type... x86_64-unknown-linux-gnu
> checking host system type... x86_64-unknown-linux-gnu
> checking target system type... x86_64-unknown-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for -p flag to install... yes
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for kde-config... /opt/kde3/bin/kde-config
> checking where to install... /opt/kde3 (as returned by kde-config)
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking dependency style of g++... gcc3
> checking whether g++ supports -Wmissing-format-attribute... yes
> checking whether gcc supports -Wmissing-format-attribute... yes
> checking whether g++ supports -Wundef... yes
> checking whether g++ supports -Wno-long-long... yes
> checking whether g++ supports -Wnon-virtual-dtor... yes
> checking whether g++ supports -fno-exceptions... yes
> checking whether g++ supports -fno-check-new... yes
> checking whether g++ supports -fno-common... yes
> checking whether g++ supports -fexceptions... yes
> checking how to run the C++ preprocessor... g++ -E
> checking whether g++ supports -O0... yes
> checking whether g++ supports -Wl,--no-undefined... yes
> checking whether g++ supports -Wl,--allow-shlib-undefined... yes
> using lib directory suffix 64
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for egrep... grep -E
> checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
> checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
> checking for /usr/x86_64-suse-linux/bin/ld option to reload object
> files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognise dependent libraries... pass_all
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking for g77... no
> checking for f77... no
> checking for xlf... no
> checking for frt... no
> checking for pgf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for f90... no
> checking for xlf90... no
> checking for pgf90... no
> checking for epcf90... no
> checking for f95... no
> checking for fort... no
> checking for xlf95... no
> checking for ifc... no
> checking for efc... no
> checking for pgf95... no
> checking for lf95... no
> checking for gfortran... no
> checking whether we are using the GNU Fortran 77 compiler... no
> checking whether accepts -g... no
> checking the maximum length of command line arguments... 32768
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking if gcc static flag works... yes
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC
> checking if gcc PIC flag -fPIC works... yes
> checking if gcc supports -c -o file.o... yes
> checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m
> elf_x86_64) supports shared libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... no
> checking for dlopen in -ldl... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by g++... /usr/x86_64-suse-linux/bin/ld -m
> elf_x86_64
> checking if the linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) is
> GNU ld... yes
> checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m
> elf_x86_64) supports shared libraries... yes
> checking for g++ option to produce PIC... -fPIC
> checking if g++ PIC flag -fPIC works... yes
> checking if g++ supports -c -o file.o... yes
> checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m
> elf_x86_64) supports shared libraries... yes
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for shl_load... (cached) no
> checking for shl_load in -ldld... (cached) no
> checking for dlopen... (cached) no
> checking for dlopen in -ldl... (cached) yes
> checking whether a program can dlopen itself... (cached) yes
> checking whether a statically linked program can dlopen itself...
> (cached) yes
> appending configuration tag "F77" to libtool
> checking for msgfmt... /usr/bin/msgfmt
> checking for gmsgfmt... /usr/bin/msgfmt
> checking for xgettext... /usr/bin/xgettext
> checking if C++ programs can be compiled... yes
> checking for strlcat... no
> checking if strlcat needs custom prototype... yes - in libkdefakes
> checking for strlcpy... no
> checking if strlcpy needs custom prototype... yes - in libkdefakes
> checking for main in -lutil... yes
> checking for main in -lcompat... no
> checking for crypt in -lcrypt... yes
> checking for socklen_t... yes
> checking for dnet_ntoa in -ldnet... no
> checking for dnet_ntoa in -ldnet_stub... no
> checking for inet_ntoa... yes
> checking for connect... yes
> checking for remove... yes
> checking for shmat... yes
> checking for sys/types.h... (cached) yes
> checking for stdint.h... (cached) yes
> checking sys/bitypes.h usability... yes
> checking sys/bitypes.h presence... yes
> checking for sys/bitypes.h... yes
> checking for poll in -lpoll... no
> checking Carbon/Carbon.h usability... no
> checking Carbon/Carbon.h presence... no
> checking for Carbon/Carbon.h... no
> checking CoreAudio/CoreAudio.h usability... no
> checking CoreAudio/CoreAudio.h presence... no
> checking for CoreAudio/CoreAudio.h... no
> checking if res_init needs -lresolv... yes
> checking for res_init... yes
> checking if res_init needs custom prototype... no
> checking for killpg in -lucb... no
> checking for int... yes
> checking size of int... 4
> checking for short... yes
> checking size of short... 2
> checking for long... yes
> checking size of long... 8
> checking for char *... yes
> checking size of char *... 8
> checking for dlopen in -ldl... (cached) yes
> checking for shl_unload in -ldld... no
> checking for size_t... yes
> checking size of size_t... 8
> checking for unsigned long... yes
> checking size of unsigned long... 8
> checking sizeof size_t == sizeof unsigned long... yes
> checking crt_externs.h usability... no
> checking crt_externs.h presence... no
> checking for crt_externs.h... no
> checking for _NSGetEnviron... no
> checking for vsnprintf... yes
> checking for snprintf... yes
> checking for X... libraries /usr/X11R6/lib64,
headers /usr/X11R6/include
> checking for IceConnectionNumber in -lICE... yes
> checking for libXext... yes
> checking for pthread_create in -lpthread... yes
> checking for extra includes... no
> checking for extra libs... no
> checking for libz... -lz
> checking for libpng... -lpng -lz -lm
> checking for libjpeg6b... no
> checking for libjpeg... -ljpeg
> checking for perl... /usr/bin/perl
> checking for Qt... libraries /usr/lib/qt3/lib64,
> headers /usr/lib/qt3/include using -mt
> checking for moc... /usr/lib/qt3/bin/moc
> checking for uic... /usr/lib/qt3/bin/uic
> checking whether uic supports -L ... yes
> checking whether uic supports -nounload ... yes
> checking if Qt needs -ljpeg... no
> checking for rpath... yes
> checking for KDE... libraries /opt/kde3/lib64,
headers /opt/kde3/include
> checking if UIC has KDE plugins available... yes
> checking for KDE paths... defaults
> checking for dcopidl... /opt/kde3/bin/dcopidl
> checking for dcopidl2cpp... /opt/kde3/bin/dcopidl2cpp
> checking for mcopidl... /opt/kde3/bin/mcopidl
> checking for artsc-config... /opt/kde3/bin/artsc-config
> checking for meinproc... /opt/kde3/bin/meinproc
> checking for kconfig_compiler... /opt/kde3/bin/kconfig_compiler
> checking for dcopidlng... /opt/kde3/bin/dcopidlng
> checking for xmllint... /usr/bin/xmllint
> checking whether byte ordering is bigendian... no
> checking for MAXPATHLEN... 4096
> checking if doc should be compiled... yes
> checking if po should be compiled... yes
> checking if src should be compiled... yes
> configure: creating ./config.status
>
> Good - your configure finished. Start make now
>
> /bin/sh ./config.status
> fast creating Makefile
> fast creating doc/Makefile
> fast creating doc/en/Makefile
> fast creating po/Makefile
> fast creating src/Makefile
> config.pl: fast created 5 file(s).
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
> Makefile:846: warning: overriding commands for target `clean-bcheck'
> Makefile:809: warning: ignoring old commands for target `clean-bcheck'
> Makefile:851: warning: overriding commands for target `bcheck-am'
> Makefile:814: warning: ignoring old commands for target `bcheck-am'
> make: Warning: File `Makefile.am' has modification time 8.1e+04 s in
the
> future
> cd . && make -f admin/Makefile.common configure.in ;
> make[1]: Entering directory `/home/bernd/kio_photocd'
> make[1]: Warning: File `admin/Makefile.common' has modification time
> 8.1e+04 s in the future
> make[1]: warning: Clock skew detected. Your build may be incomplete.
> make[1]: Leaving directory `/home/bernd/kio_photocd'
> cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run aclocal-1.9
> /usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of
> AM_PATH_SMPEG
> run info '(automake)Extending aclocal'
> or see
> http://sources.redhat.com/automake/automake.html#Extending-aclocal
> cd . && /bin/sh /home/bernd/kio_photocd/admin/missing --run
automake-1.9
> --gnu
> cd . && perl admin/am_edit
> cd . && perl admin/am_edit Makefile.in
> cd . && rm -f configure
> cd . && make -f admin/Makefile.common configure
> make[1]: Entering directory `/home/bernd/kio_photocd'
> make[1]: Warning: File `admin/Makefile.common' has modification time
> 8.1e+04 s in the future
> make[1]: warning: Clock skew detected. Your build may be incomplete.
> make[1]: Leaving directory `/home/bernd/kio_photocd'
> /bin/sh ./config.status --recheck
> running /bin/sh ./configure --no-create --no-recursion
> checking build system type... x86_64-unknown-linux-gnu
> checking host system type... x86_64-unknown-linux-gnu
> checking target system type... x86_64-unknown-linux-gnu
> checking for a BSD-compatible install... /usr/bin/install -c
> checking for -p flag to install... yes
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for kde-config... /opt/kde3/bin/kde-config
> checking where to install... /opt/kde3 (as returned by kde-config)
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> checking for g++... g++
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> make: *** [config.status] Error 1
>
>
> Someone have some tips for me to solve this problem?
>
> --
> Bernd Lachner
>
> Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie!
> Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
>
> -
> to unsubscribe from this list send an email to
> kdevelop-request at kdevelop.org with the following body:
> unsubscribe »your-email-address«
>
--
Bernd Lachner
Geschenkt: 3 Monate GMX ProMail gratis + 3 Ausgaben stern gratis
++ Jetzt anmelden & testen ++ http://www.gmx.net/de/go/promail ++
-
to unsubscribe from this list send an email to kdevelop-request at kdevelop.org with the following body:
unsubscribe »your-email-address«
More information about the KDevelop
mailing list