[Kwintv] kdetv doesnt recognize my card
birbilis
birbilis at gmail.com
Wed Jul 6 09:46:34 CEST 2005
u mean i sould replace /dev/video0 with something else??
but with what? this is wherre my tv card is located. and how come that
xawtv and tvtime have no problem seeing the card??
i just want kdetv to run cause i heard its much better than the others.
On 7/5/05, George Fragos <fragos at gmail.com> wrote:
> With SuSE my WinTV card's tuner has never been identified by YaST in 9.1-3.
> When this happens, the tuner is set to 0 like yours. Look at your card to
> identify the tuner so you can determine the correct tuner number. I found
> some tuner numbers that worked patialy by experimentation. When I finally
> pulled the sticker off my tuner chip, the big one, I found the true
> identity. SuSE YaST TV configuration had the model name and tuner number
> even though it couldn't determine the correct number.
>
>
> On 7/5/05, birbilis <birbilis at gmail.com> wrote:
> >
> > i dont think its the v4l because i have included it in my
> /etc/X11/xorg.conf::
> >
> > Section "Module"
> >
> > # This loads the DBE extension module.
> >
> > Load "dbe" # Double buffer extension
> >
> > # This loads the miscellaneous extensions module, and disables
> > # initialisation of the XFree86-DGA extension within that module.
> > SubSection "extmod"
> > Option "omit xfree86-dga" # don't initialise the DGA extension
> > EndSubSection
> >
> > # This loads the font modules
> > Load "type1"
> > # Load "speedo"
> > Load "freetype"
> > # Load "xtt"
> >
> > # This loads the GLX module
> > # Load "glx"
> > # This loads the DRI module
> > # Load "dri"
> > Load "v4l"
> > EndSection
> >
> >
> > is there anything else i can do?
> > any help is appreciated.
> >
> > On 7/5/05, ghkilo <ghkilo at t-online.de> wrote:
> > > birbilis schrieb:
> > >
> > > >i'm terribly sorry...
> > > >my card is prolink pixelview playtv pro based on the bt878 chip.
> > > >my lsmod gives me::
> > > >
> > > >bash-2.05b# lsmod
> > > >Module Size Used by
> > > >smbfs 64632 0
> > > >snd_pcm_oss 50208 0
> > > >snd_mixer_oss 19072 1 snd_pcm_oss
> > > >tuner 22564 0
> > > >bttv 150224 0
> > > >video_buf 18564 1 bttv
> > > >firmware_class 8960 1 bttv
> > > >i2c_algo_bit 9992 1 bttv
> > > >v4l2_common 5760 1 bttv
> > > >btcx_risc 5000 1 bttv
> > > >tveeprom 12696 1 bttv
> > > >i2c_core 19968 4
> tuner,bttv,i2c_algo_bit,tveeprom
> > > >videodev 8704 1 bttv
> > > >snd_cmipci 29440 0
> > > >snd_pcm 85124 2 snd_pcm_oss,snd_cmipci
> > > >snd_page_alloc 8708 1 snd_pcm
> > > >snd_opl3_lib 10240 1 snd_cmipci
> > > >snd_timer 22788 2 snd_pcm,snd_opl3_lib
> > > >snd_hwdep 8608 1 snd_opl3_lib
> > > >snd_mpu401_uart 7552 1 snd_cmipci
> > > >snd_rawmidi 21536 1 snd_mpu401_uart
> > > >snd_seq_device 7948 2
> snd_opl3_lib,snd_rawmidi
> > > >snd 49380 10
> > >
> >snd_pcm_oss,snd_mixer_oss,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> > > >
> > > >
> > > >
> > > >(bttv module is loaded)
> > > >
> > > >and my lspci gves me::
> > > >
> > > >0000:03:09.0 Multimedia video controller: Brooktree Corporation Bt878
> > > >Video Capture (rev 11)
> > > >0000:03:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio
> > > >Capture (rev 11)
> > > >
> > > >thnx a lot for the interest. I have tryed both emerging kdetv and
> > > >compiling from the sources but nothing works. kdetv says no devices
> > > >found.
> > > >
> > > >i hope i have been complete.
> > > >
> > > >On 7/5/05, ghkilo <ghkilo at t-online.de> wrote:
> > > >
> > > >
> > > >>Hello,
> > > >>
> > > >>please tell the community more about your tv-card, because many
> > > >>tvv-cards with an BT8x8 Chip are around teh world.
> > > >>
> > > >>Tuner:
> > > >>BT/CX: BT878
> > > >>Mnaufacturer:
> > > >>
> > > >>Not more is needed to help you.
> > > >>
> > > >>best regards gerhard
> > > >>
> > > >>
> > > >>
> > > >_______________________________________________
> > > >kwintv mailing list
> > > >kwintv at kde.org
> > > >https://mail.kde.org/mailman/listinfo/kwintv
> > > >
> > > >
> > > >
> > > Thanks,
> > >
> > > it seems no recognition by missing V4L or V4L2 modules.
> > > Kdetv needs one of them, libzvbi also for Videotextplugin enabled.
> > >
> > > The V4L drivers should installed an loaded in "X11Conf, or XF86Config-4"
> > >
> > > happy installing
> > >
> > > Gerhard
> > > _______________________________________________
> > > kwintv mailing list
> > > kwintv at kde.org
> > > https://mail.kde.org/mailman/listinfo/kwintv
> > >
> > _______________________________________________
> > kwintv mailing list
> > kwintv at kde.org
> > https://mail.kde.org/mailman/listinfo/kwintv
> >
>
>
>
> --
> ____________
> George Fragos
> fragos at gmail.com
> 73 East Swift Ave.
> Fresno CA 93704
> _______________________________________________
> kwintv mailing list
> kwintv at kde.org
> https://mail.kde.org/mailman/listinfo/kwintv
>
>
>
More information about the kwintv
mailing list