[Kwintv] Hauppauge WinTV Go-Plus and Fedora Core 3

[William Garber]

garberw at theta> dmesg | grep bttv
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:06:03.0, irq: 185, latency: 32, mmio:
0xdfefe000bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID
is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=29440, tuner=? (-1), radio=no
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
garberw at theta>
root at theta### cat /etc/modprobe.conf
alias eth0 e100
alias scsi_hostadapter 3w-xxxx
alias scsi_hostadapter1 ata_piix
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1
&& /usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1
|| : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1
alias char-major-81 bttv
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias char-major-195* nvidia
root at theta###










On Tue, 2005-02-15 at 22:01 -0500, William Garber wrote:
> I can't get it to work.
> Says tuner = -1
> Tried setting tuner to 2 with 
> rmmod bttv
> depmod bttv tuner=2
> sets tuner but still no tv.
> I think the chip is:
> Conexant Fusion 878A 
> 
> kdetv shows no plugin for the vbi decoder.
> There are no "available station detection methods"
> in the channel wizard.
> 
> Is the card=10 setting ok?
> 
> Kudzu set up the card.
> What should the permissions be on 
> /dev/video0 
> 
> I tried running kdetv as root and as user.
> 
> tvtime also shows no signal, but I had
> it working at one time, only got one channel.
> 
> 
> 
> 
> _______________________________________________
> kwintv mailing list
> kwintv at kde.org
> https://mail.kde.org/mailman/listinfo/kwintv