[Kwintv] No devices to select from

[Adrian Dannberg]

Am Sonntag, 31. Oktober 2004 23:00 schrieb Dirk Ziegelmeier:

> Can you show me the command line output of kdetv 0.8.3, or better, the
> latest CVS snapshot? There should be some hints in there. Currently I'd
> guess that you have installed kdetv into another dir than the previous
> 0.8.0, so the new kdetv finds the old plugins for some reason (it looks
> into the wrong dir) and cannot load them.
>

Hi its been a while, I was quite busy lately, but here comes the command 
output (0.8.4).

If kdetv just looks in the wrong dir, how can I tell it to look in the right 
one?

Adrian
-------------- next part --------------
kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video plugins!
kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins!
kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins!
Try to open v4l2 vbi device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.12 2002/11/30 02:37:18 mschimek Exp $Opened /dev/v4l/vbi0
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.4 2003/02/16 18:58:07 mschimek Exp $Opened /dev/v4l/vbi0
/dev/v4l/vbi0 (BT878 video (Hauppauge (bt878))) is a v4l2 vbi device,
driver bttv, version 0x0000090f
Current scanning system is 625
Querying current vbi parameters... success
VBI capture parameters granted: format 59455247, 35468950 Hz, 2048 bpl, offs 244, F1 7+16, F2 319+16, flags 00000000
Nyquist check passed
Request decoding of services 0x60000c7f
Will decode services 0x0000041f
Using streaming interface
Fifo initialized
Requesting streaming i/o buffers
Try to open v4l vbi device, libzvbi interface rev.
$Id: io-v4l.c,v 1.9 2002/11/30 02:37:18 mschimek Exp $Opened /dev/v4l/vbi0
Driver name 'BT878 video (Hauppauge (bt878))'
Attempt to guess the videostandard
Driver supports VIDIOCGTUNER: 0
Videostandard is PAL/SECAM
/dev/v4l/vbi0 (BT878 video (Hauppauge (bt878))) is a v4l vbi device
Hinted video standard 0, guessed 625
Driver supports VIDIOCGVBIFMT, guessed videostandard 625
Accept current vbi parameters
Guessed videostandard 625
Nyquist check passed
Will decode services 0x0000041f
Warning: no read select, reading will block
Capture buffer allocated
Successful opened /dev/v4l/vbi0 (BT878 video (Hauppauge (bt878)))
kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available