[Kwintv] Finetuning

[Ralph Koettlitz]

On Montag 27 Oktober 2003 12:47, Karl-Heinz Zimmer wrote:
> On Sun, 26 Oct 2003 16:50:00 +0100, Dirk Ziegelmeier wrote:
> (...)
>
> > I've implemented finetuning if a frequency range is scanned.
> > Unfortunately, it is only possible to figure out whether there
> > is a signal or not, but not the signal strength.
> > There is another problem. If the user chooses a small frequency
> > increment, stations are found multiple times. Should this be
> > fixed?


Normaly, each region has it's own frequencys with a constant minimum distance 
between 2 possible frequencys. So if you find a signal you could jump to the 
next possible frequency. The distance between these frequencys should be 
associated with a region.   If you are so lucky an live near a border of 
another region you must be able to configure more than 1 region. My proposal 
is up to 5. Then you are able to calculate all possible frequencys.  It's 
simple or not?

Ralph
-- 
***************************************************
Ralph Koettlitz
Neue Strasse 39
D-21073 Hamburg
email: koettlitz at gmx.de
GnuPG-Key at hkp://blackhole.pca.dfn.de 
Current key fingerprint: 
4C34 8017 D8B1 F2CE 3200 DA9B 1CFD 140C 3F9B E2AF
***************************************************