[Kroupware] Toltec Connector Problem
Dick Kniep
dick.kniep at lindix.nl
Tue Dec 2 00:56:47 CET 2003
Hi List,
I have exactly the many problems with the kolab server and among them the same
problem as described here. However, whatever I do, it does not go away.
> 1) Check and make absolutely sure about the permission of the keys.
cd /kolab/etc/kolab
ls -l *.pem
-rw-r----- 1 root kolab-r 672 Oct 15 02:34 cert.pem
-rw-r----- 1 root kolab-r 887 Oct 15 02:34 key.pem
(This is the actual output from my ls command)
> 2) run
> # /etc/init.d/kolab stop
> ^^
> # /etc/init.d/kolab start
> ^^
Yep, done that too (as a matter of fact some 15 times......
Log of imapd.log gives me:
Dec 02 00:03:38 LinServ01 <notice> imapd[13830]: TLS engine: cannot load CA
data
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: unable to get certificate from
'/kolab/etc/kolab/cert.pem'
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: TLS engine: cannot load cert/
key data
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: error initializing TLS
But right after the stop/start of the kolab server I also get these messages:
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483654
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn
21474836
54
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn
2147483655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn
2147483
655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483656
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn
21474836
56
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn
2147483657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn
2147483
657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483658
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn
21474836
58
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn
2147483659
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn
2147483659
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn
2147483
659
Dec 01 23:35:13 LinServ01 <debug> imapd[12654]: accepted connection
Dec 01 23:35:13 LinServ01 <debug> imapd[12655]: accepted connection
These messages don't feel very healthy, and I haven't got a clue what is going
on. It looks as though something has been screwed up, and it is trying to
recover from that.
So if anyone has a clue. Please let us know. We were supposed to install this
server for professional use, but as it is now, the reliability is way below
the required level.
Regards,
D.Kniep
More information about the Kroupware
mailing list