[FreeNX-kNX] FreeNX LoadBalancing

[Jean Milot]

Hi ,

My configuration for loadbalancing :

LOAD_BALANCE_SERVERS="10.1.1.207 10.1.1.208 10.1.1.200 10.1.1.201 
10.1.1.202 10.1.1.204 10.1.1.205"
LOAD_BALANCE_ALGORITHM="load"

With the choice "load", we need to use the script /usr/bin/nxcheckload


Sincerely,

Jean

PS: i search to make sound / share usb device and printers work.

Jean Milot  - jmilot at dotriver.eu - www.dotriver.eu<http://www.dotriver.eu/>
5 passage de l'avenir, F-69200 Vénissieux
Fixe: +33 (0)4 27 46 39 80 Hotline: # 89  Fax: # 81

Rencontrez DotRiver : Salon Use-IT 2012 (http://bit.ly/IV8U81),
Festival Temps Libre (http://bit.ly/L6YbwD)
DotRiver, membre du consortium "nuage" (http://bit.ly/LNIfMr)

Pas à pas, agissons au quotidien pour préserver notre environnement. N'imprimez que si nécessaire, réduisez les déchets informatiques et économisez l'énergie en utilisant les solutions DotRiver.


Le 26/09/2012 16:30, Jamie Fargen a écrit :
> Jean,
>
> I have edited node.conf on both hosts 192.168.118.65 and 192.168.118.66.
>
> When I try so run 'su - nx' the host 192.168.118.65 the console just 
> hangs, but when I do the same thing on the .66 host I am dropped into 
> the shell for NX.
>
> In addition SELinux has been disabled for both hosts.
>
> Here are the relevant entries from the node.conf on the host being 
> used as the forward server 192.168.118.65 <http://192.168.118.65>:
> ENABLE_SERVER_FORWARD="1"
> SERVER_FORWARD_HOST="192.168.118.65"
> SERVER_FORWARD_PORT=22
> SERVER_FORWARD_KEY="/etc/nxserver/client.id_dsa.key"
>
> and
>
> LOAD_BALANCE_SERVERS="192.168.118.65 192.168.118.66"
> LOAD_BALANCE_ALGORITHM="random"
>
> The node.conf being used on the other Load Balanced host:
> ENABLE_SERVER_FORWARD="1"
> SERVER_FORWARD_HOST="192.168.118.65"
> SERVER_FORWARD_PORT=22
> SERVER_FORWARD_KEY="/etc/nxserver/client.id_dsa.key"
>
> and
> LOAD_BALANCE_SERVERS="192.168.118.65 192.168.118.66"
> LOAD_BALANCE_ALGORITHM="random"
>
> Regards,
>
> Jamie I Fargen
>
>
>
> On Mon, Sep 24, 2012 at 11:02 AM, Jean Milot <jmilot at dotriver.eu 
> <mailto:jmilot at dotriver.eu>> wrote:
>
>     Hello,
>
>     It is easy to configure LoadBalancing and Forwarding.
>
>     You need to edit the /etc/nxserver/node.conf for specify your hosts.
>
>     Don't forget the /usr/bin/nxcheckload (if you need)
>
>     Sincerely,
>
>     Jean
>
>     Jean Milot  -jmilot at dotriver.eu  <mailto:jmilot at dotriver.eu>  -www.dotriver.eu  <http://www.dotriver.eu>  <http://www.dotriver.eu/>
>     5 passage de l'avenir, F-69200 Vénissieux
>     Fixe:+33 (0)4 27 46 39 80  <tel:%2B33%20%280%294%2027%2046%2039%2080>  Hotline: # 89  Fax: # 81
>
>     Rencontrez DotRiver : Salon Use-IT 2012 (http://bit.ly/IV8U81),
>     Festival Temps Libre (http://bit.ly/L6YbwD)
>     DotRiver, membre du consortium "nuage" (http://bit.ly/LNIfMr)
>
>     Pas à pas, agissons au quotidien pour préserver notre environnement. N'imprimez que si nécessaire, réduisez les déchets informatiques et économisez l'énergie en utilisant les solutions DotRiver.
>
>
>     Le 24/09/2012 16:56, Jamie Fargen a écrit :
>>     Hello,
>>
>>     I am running CentOS 6.2 w/Gnome and I have installed and setup
>>     FreeNX on two servers. I have no problems with the basic config
>>     as installed through yum. Now I would like to configure NX to use
>>     load balancing and forwarding between these two hosts. At this
>>     point there seems to be an issue with the ssh keys.
>>
>>     Regards,
>>
>>     Jamie I. Fargen
>>
>>
>>     ________________________________________________________________
>>           Were you helped on this list with your FreeNX problem?
>>          Then please write up the solution in the FreeNX Wiki/FAQ:
>>
>>     http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>>
>>               Don't forget to check the NX Knowledge Base:
>>                       http://www.nomachine.com/kb/
>>
>>     ________________________________________________________________
>>             FreeNX-kNX mailing list ---FreeNX-kNX at kde.org  <mailto:FreeNX-kNX at kde.org>
>>            https://mail.kde.org/mailman/listinfo/freenx-knx
>>     ________________________________________________________________
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20120927/5e8862e4/attachment.html>