[FreeNX-kNX] FreeNX LoadBalancing

[Jamie Fargen]

Jean,

I have edited node.conf on both hosts 192.168.118.65 and 192.168.118.66.

When I try so run 'su - nx' the host 192.168.118.65 the console just hangs,
but when I do the same thing on the .66 host I am dropped into the shell
for NX.

In addition SELinux has been disabled for both hosts.

Here are the relevant entries from the node.conf on the host being used as
the forward server 192.168.118.65:
ENABLE_SERVER_FORWARD="1"
SERVER_FORWARD_HOST="192.168.118.65"
SERVER_FORWARD_PORT=22
SERVER_FORWARD_KEY="/etc/nxserver/client.id_dsa.key"

and

LOAD_BALANCE_SERVERS="192.168.118.65 192.168.118.66"
LOAD_BALANCE_ALGORITHM="random"

The node.conf being used on the other Load Balanced host:
ENABLE_SERVER_FORWARD="1"
SERVER_FORWARD_HOST="192.168.118.65"
SERVER_FORWARD_PORT=22
SERVER_FORWARD_KEY="/etc/nxserver/client.id_dsa.key"

and
LOAD_BALANCE_SERVERS="192.168.118.65 192.168.118.66"
LOAD_BALANCE_ALGORITHM="random"

Regards,

Jamie I Fargen



On Mon, Sep 24, 2012 at 11:02 AM, Jean Milot <jmilot at dotriver.eu> wrote:

>  Hello,
>
> It is easy to configure LoadBalancing and Forwarding.
>
> You need to edit the /etc/nxserver/node.conf for specify your hosts.
>
> Don't forget the /usr/bin/nxcheckload (if you need)
>
> Sincerely,
>
> Jean
>
> Jean Milot  - jmilot at dotriver.eu - www.dotriver.eu <http://www.dotriver.eu/> <http://www.dotriver.eu/>
> 5 passage de l'avenir, F-69200 Vénissieux
> Fixe: +33 (0)4 27 46 39 80 Hotline: # 89  Fax: # 81
>
> Rencontrez DotRiver : Salon Use-IT 2012 (http://bit.ly/IV8U81),
> Festival Temps Libre (http://bit.ly/L6YbwD)
> DotRiver, membre du consortium "nuage" (http://bit.ly/LNIfMr)
>
> Pas à pas, agissons au quotidien pour préserver notre environnement. N'imprimez que si nécessaire, réduisez les déchets informatiques et économisez l'énergie en utilisant les solutions DotRiver.
>
>
> Le 24/09/2012 16:56, Jamie Fargen a écrit :
>
> Hello,
>
>  I am running CentOS 6.2 w/Gnome and I have installed and setup FreeNX on
> two servers. I have no problems with the basic config as installed through
> yum. Now I would like to configure NX to use load balancing and forwarding
> between these two hosts. At this point there seems to be an issue with the
> ssh keys.
>
>  Regards,
>
>  Jamie I. Fargen
>
>
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/
>
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20120926/61e8fdd9/attachment.html>