[FreeNX-kNX] More FreeBSD related problems.
Dave Latez
latez1 at gmail.com
Wed Aug 20 16:44:47 UTC 2008
Alastair,
At first that was a problem where nxagent had problems starting due to
some misplaced libraries once I corrected that I was able to launch nxagent
without any issues. I wasnt able to find the commands you are referring to
in the FAQ but perhaps I was looking into the correct location. Thanks in
advance for your troubleshooting attempts :)
Dave
On Wed, Aug 20, 2008 at 5:09 AM, Alastair Johnson <alastair at solutiontrax.com
> wrote:
> I've not seen these before. It may be an indication of something that
> works differently under BSD I suppose. What is that process? From the
> rest of the log it looks like X is exiting early. Usually the reason for
> this is clear in the errors file, but sometimes it doesn't even get that
> far.
>
> Can you ssh into the box and start nxagent manually? I don't remember
> the exact commands but I think they're in the FAQ. This should give you
> a clearer view of any errors.
>
> Dave Latez wrote:
> > Only this...
> > Loop: WARNING! Signal 'SIGINT not installed in process with pid '15774'.
> > Loop: WARNING! Signal 'SIGTERM not installed in process with pid '15774'.
> > Loop: WARNING! Signal 'SIGHUP not installed in process with pid '15774'.
> >
> > Not sure if this is significant or not...
> >
> > On Tue, Aug 19, 2008 at 3:46 AM, Alastair Johnson
> > <alastair at solutiontrax.com <mailto:alastair at solutiontrax.com>> wrote:
> >
> > What's in the errors file under .nx?
> >
> > Dave Latez wrote:
> > > Well I recently re-installed my FreeBSD machine and hence I
> > figured I'd
> > > give it another shot. This was a clean 7.0-RELEASE. I have
> installed
> > > KDE-4.1 from ports and it seems to be functioning normally when
> > running
> > > it from console. I've installed FreeNX freenx-0.6.0_1 along with
> > > nxserver-2.1.0_1. On my vista desktop I am running NX Client for
> > Windows
> > > Version 3.2.0-13. I've probably spent the last 5 hours trouble
> > shooting
> > > this and I can't seem to figure it out I am really hoping that one
> of
> > > you may have a solution so I am not forced to use VNC :(
> > >
> > >
> > > thanks in advance!
> > >
> > > So here we go... first from the NX Client
> > >
> > >
> > > NX> 203 NXSSH running with pid: 9860
> > > NX> 285 Enabling check on switch command
> > > NX> 285 Enabling skip of SSH config files
> > > NX> 285 Setting the preferred NX options
> > > NX> 200 Connected to address: 192.168.0.1 <http://192.168.0.1>
> > <http://192.168.0.1> on port: 22
> > > NX> 202 Authenticating user: nx
> > > NX> 208 Using auth method: publickey
> > > HELLO NXSERVER - Version 1.5.0-60 OS (GPL)
> > > NX> 105 hello NXCLIENT - Version 1.5.0
> > > NX> 134 Accepted protocol: 1.5.0
> > > NX> 105 SET SHELL_MODE SHELL
> > > NX> 105 SET AUTH_MODE PASSWORD
> > > NX> 105 login
> > > NX> 101 User: latez
> > > NX> 102 Password:
> > > NX> 103 Welcome to: Nemesis.darkflare.com
> > <http://Nemesis.darkflare.com> <http://Nemesis.darkflare.com>
> > > user: latez
> > > NX> 105 listsession --user="latez" --status="suspended,running"
> > > --geometry="1680x1050x32+render" --type="unix-kde"
> > > NX> 127 Sessions list of user 'latez' for reconnect:
> > >
> > > Display Type Session ID Options
> > Depth
> > > Screen Status Session Name
> > > ------- ---------------- --------------------------------
> > -------- -----
> > > -------------- ----------- ------------------------------
> > >
> > >
> > > NX> 148 Server capacity: not reached for user: latez
> > > NX> 105 startsession --link="adsl" --backingstore="1"
> > --encryption="1"
> > > --cache="64M" --images="256M" --media="0" --session="Nemesis"
> > > --type="unix-kde" --geometry="1680x990" --kbtype="pc102/en_US"
> > > --screeninfo="1680x990x32+render"
> > >
> > > NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL)
> > > NX> 700 Session id:
> > > Nemesis.darkflare.com-1004-1E681BC2914771067BAE8BB6072D5E79
> > > NX> 705 Session display: 1004
> > > NX> 703 Session type: unix-kde
> > > NX> 701 Proxy cookie: e940661402b9c395250f109d60cc1e19
> > > NX> 702 Proxy IP: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
> > > NX> 706 Agent cookie: e940661402b9c395250f109d60cc1e19
> > > NX> 704 Session cache: unix-kde
> > > NX> 707 SSL tunneling: 1
> > > NX> 1009 Session status: starting
> > > NX> 1004 Error: Session did not start.
> > > NX> 596 Session start failed.
> > > NX> 999 Bye
> > > NX> 280 Exiting on signal: 15
> > >
> > > Now from the session file within .nx
> > >
> > > NXAGENT - Version 2.1.0
> > >
> > > Copyright (C) 2001, 2006 NoMachine.
> > > See http://www.nomachine.com/ for more information.
> > >
> > > Info: Agent running with pid '73607'.
> > > Session: Starting session at 'Mon Aug 18 02:59:39 2008'.
> > > Warning: Signal 'SIGINT not installed in process with pid '73607'.
> > > Warning: Signal 'SIGTERM not installed in process with pid
> '73607'.
> > > Warning: Signal 'SIGHUP not installed in process with pid '73607'.
> > >
> > > Fatal server error:
> > > Error: Unable to open display
> > >
> >
> 'nx/nx,options=/home/latez/.nx/C-Nemesis.darkflare.com-1004-1E681BC2914771067BAE8BB6072D5E79/options:1004'.
> > > kbuildsycoca4(74415) kdemain: Reusing existing ksycoca
> > > kbuildsycoca4(74415) KBuildSycoca::recreate: Recreating ksycoca
> file
> > > ("/var/tmp/kdecache-latez/ksycoca4", version 116)
> > > kbuildsycoca4(74415) KBuildSycoca::createEntry: new:
> > "screensaver.desktop"
> > > AND so on...
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > Link points to "/tmp/kde-latez"
> > > Link points to "/var/tmp/kdecache-latez"
> > > Link points to "/tmp/ksocket-latez"
> > > startkde: Starting up...
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > kdeinit4: preparing to launch
> > /usr/local/kde4/lib/kde4/libexec/klauncher
> > > kdeinit4: Launched KLauncher, pid = 74439 result = 0
> > > klauncher(74439)/kio (KIOConnection)
> > > KIO::ConnectionServer::listenForRemote: Listening on
> > > "local:/tmp/ksocket-latez/klauncherJ74439.slave-socket"
> > > kdeinit4: Fatal IO error: client killed
> > > kdeinit4: sending SIGHUP to children.
> > > klauncher: Exiting on signal 1
> > > kdeinit4: sending SIGTERM to children.
> > > kdeinit4: Exit.
> > > kdeinit4_wrapper: Warning:
> > >
> > connect(/home/latez/.kde4/
> socket-Nemesis.darkflare.com/kdeinit4_unix_1004
> > <http://socket-Nemesis.darkflare.com/kdeinit4_unix_1004>
> > > <http://socket-Nemesis.darkflare.com/kdeinit4_unix_1004>) failed:
> > : No
> > > such file or directory
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > startkde: Shutting down...
> > > kdeinit4_wrapper: Warning:
> > >
> > connect(/home/latez/.kde4/
> socket-Nemesis.darkflare.com/kdeinit4_unix_1004
> > <http://socket-Nemesis.darkflare.com/kdeinit4_unix_1004>
> > > <http://socket-Nemesis.darkflare.com/kdeinit4_unix_1004>) failed:
> > : No
> > > such file or directory
> > > Error: Can not contact kdeinit4!
> > > kde3: not found
> > > kde3: not found
> > > startkde: Running shutdown scripts...
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > X connection to unix:1004.0 broken (explicit kill or server
> > shutdown).
> > > startkde: Done.
> > >
> > > And then we nxserver.log
> > >
> > > -- NX SERVER START: -c /usr/local/NX/bin/nxserver - ORIG_COMMAND=
> > > HELLO NXSERVER - Version 1.5.0-60 OS (GPL)
> > > NX> 105 hello NXCLIENT - Version 1.5.0
> > > NX> 134 Accepted protocol: 1.5.0
> > > NX> 105 SET SHELL_MODE SHELL
> > > NX> 105 SET AUTH_MODE PASSWORD
> > > NX> 105 login
> > > NX> 101 User: latez
> > > NX> 102 Password:
> > > Info: Auth method: passdb ssh
> > > NX> 103 Welcome to: Nemesis.darkflare.com
> > <http://Nemesis.darkflare.com> <http://Nemesis.darkflare.com>
> > > user: latez
> > > NX> 105 listsession --user="latez" --status="suspended,running"
> > > --geometry="1680x1050x32+render" --type="unix-kde"
> > > NX> 127 Sessions list of user 'latez' for reconnect:
> > >
> > > Display Type Session ID Options
> > Depth
> > > Screen Status Session Name
> > > ------- ---------------- --------------------------------
> > -------- -----
> > > -------------- ----------- ------------------------------
> > >
> > >
> > > NX> 148 Server capacity: not reached for user: latez
> > > NX> 105 startsession --link="adsl" --backingstore="1"
> > --encryption="1"
> > > --cache="64M" --images="256M" --media="0" --session="Nemesis"
> > > --type="unix-kde" --geometry="1680x990" --kbtype="pc102/en_US"
> > > --screeninfo="1680x990x32+render"
> > >
> > >
> >
> &link=adsl&backingstore=1&encryption=1&cache=64M&images=256M&media=0&session=Nemesis&type=unix-kde&geometry=1680x990&kbtype=pc102/en_US&screeninfo=1680x990x32+render&clientproto=1.5.0&user=latez&userip=
> 192.168.0.2
> > <http://192.168.0.2>
> > >
> > <http://192.168.0.2
> >&uniqueid=1E681BC2914771067BAE8BB6072D5E79&display=1004&host=127.0.0.1
> > <http://127.0.0.1>
> > > <http://127.0.0.1>
> > > Password:
> > > NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL)
> > > NX> 700 Session id:
> > > Nemesis.darkflare.com-1004-1E681BC2914771067BAE8BB6072D5E79
> > > NX> 705 Session display: 1004
> > > NX> 703 Session type: unix-kde
> > > NX> 701 Proxy cookie: e940661402b9c395250f109d60cc1e19
> > > NX> 702 Proxy IP: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>
> > > NX> 706 Agent cookie: e940661402b9c395250f109d60cc1e19
> > > NX> 704 Session cache: unix-kde
> > > NX> 707 SSL tunneling: 1
> > > NX> 1009 Session status: starting
> > > NX> 1004 Error: Session did not start.
> > > NX> 596 Session start failed.
> > > NX> 999 Bye
> > > NX> 1004 Error: NX Agent exited with exit status 1.
> > > NX> 1006 Session status: closed
> > > NX> 1001 Bye.
> > >
> > >
> > > On Tue, Aug 5, 2008 at 10:49 AM, Dave Latez <latez1 at gmail.com
> > <mailto:latez1 at gmail.com>
> > > <mailto:latez1 at gmail.com <mailto:latez1 at gmail.com>>> wrote:
> > >
> > > So I've been trouble shooting my setup for a week now to no
> > avail. I
> > > can't seem to open a proper connection. I think i've followed
> all
> > > the trouble shooting techniques as far as all that I could
> > find that
> > > related to FreeBSD. I am posting the following on my FreeBSD
> > system.
> > > This has me quite troubled as I've grown quite accustomed to
> > my NX
> > > setup and the freedom it allows me. Any help you guys could
> > provide
> > > would be most humbly appreciated.
> > >
> > > FreeBSD Nemesis 7.0-STABLE FreeBSD 7.0-STABLE #2: Thu Jul 31
> > > 21:43:50 EDT 2008
> > latez at Nemesis:/usr/obj/usr/src/sys/NEMESIS i386
> > >
> > >
> > >
> > >
> > > *Session File *
> > >
> > > NXAGENT - Version 2.1.0
> > >
> > > Copyright (C) 2001, 2006 NoMachine.
> > > See http://www.nomachine.com/ for more information.
> > >
> > > Info: Agent running with pid '51620'.
> > > Session: Starting session at 'Tue Aug 5 10:38:11 2008'.
> > > Warning: Signal 'SIGINT not installed in process with pid
> > '51620'.
> > > Warning: Signal 'SIGTERM not installed in process with pid
> > '51620'.
> > > Warning: Signal 'SIGHUP not installed in process with pid
> > '51620'.
> > >
> > > Fatal server error:
> > > Error: Unable to open display
> > >
> >
> 'nx/nx,options=/home/latez/.nx/C-Nemesis-1033-1FB8FE831D3243D9B3B6714FFE369367/options:1033'.
> > >
> > > plication/x-tbz2'
> > > kbuildsycoca: WARNING: 'ark_part.desktop' specifies undefined
> > > mimetype/servicetype 'application/x-tbz2'
> > > kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined
> > > mimetype/servicetype 'text/english'
> > > kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined
> > > mimetype/servicetype 'text/x-c'
> > > kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined
> > > mimetype/servicetype 'text/x-c++'
> > > kbuildsycoca: WARNING:
> > > '/usr/local/share/applications/kde/kpovmodeler.desktop'
> specifies
> > > undefined mimetype/servicetype 'KPovModeler/Document'
> > > kbuildsycoca: WARNING: 'klinkstatus_part.desktop' specifies
> > > undefined mimetype/servicetype 'text/english'
> > > kbuildsycoca: WARNING: 'klinkstatus_part.desktop' specifies
> > > undefined mimetype/servicetype 'text/x-c'
> > > kbuildsycoca: WARNING: 'klinkstatus_part.desktop' specifies
> > > undefined mimetype/servicetype 'text/x-c++'
> > > kbuildsycoca: WARNING:
> > > '/usr/local/share/applications/kde/kvoctrain.desktop'
> specifies
> > > undefined mimetype/servicetype 'application/x-kvoctrain'
> > > kbuildsycoca: WARNING:
> > > '/usr/local/share/applications/kde/kvoctrain.desktop'
> specifies
> > > undefined mimetype/servicetype 'text/x-kvtml'
> > > kbuildsycoca: WARNING: 'kdevjavadebugger.desktop' specifies
> > > undefined mimetype/servicetype 'KDevelop/Part'
> > > kbuildsycoca: WARNING: 'kcertpart.desktop' specifies undefined
> > > mimetype/servicetype 'application/binary-certificate'
> > > kbuildsycoca: WARNING:
> > > '/usr/local/share/applications/kde/kmid.desktop' specifies
> > undefined
> > > mimetype/servicetype 'audio/midi'
> > > kbuildsycoca: WARNING: 'kxsldbg_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/english'
> > > kbuildsycoca: WARNING: 'kxsldbg_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/x-c'
> > > kbuildsycoca: WARNING: 'kxsldbg_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/x-c++'
> > > kbuildsycoca: WARNING: 'qeditor_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/english'
> > > kbuildsycoca: WARNING: 'qeditor_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/x-c'
> > > kbuildsycoca: WARNING: 'qeditor_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/x-c++'
> > > kbuildsycoca: WARNING: 'qeditor_part.desktop' specifies
> undefined
> > > mimetype/servicetype 'text/x-sql'
> > > kbuildsycoca: WARNING: 'knotify.desktop' specifies undefined
> > > mimetype/servicetype 'KNotify'
> > > X connection to unix:1033.0 broken (explicit kill or server
> > shutdown).
> > > X connection to unix:1033.0 broken (explicit kill or server
> > shutdown).
> > > X connection to unix:1033.0 broken (explicit kill or server
> > shutdown).
> > > startkde: Starting up...
> > > ksplash: Fatal IO error: client killed
> > > kdeinit: Fatal IO error: client killed
> > > kdeinit: sending SIGHUP to children.
> > > klauncher: Exiting on signal 1
> > > kdeinit: sending SIGTERM to children.
> > > kdeinit: Exit.
> > > Warning: connect() failed: : No such file or directory
> > > ksmserver: Fatal IO error: client killed
> > > DCOPClient::attachInternal. Attach failed Could not open
> > network socket
> > > DCOPClient::attachInternal. Attach failed Could not open
> > network socket
> > > ERROR: Couldn't attach to DCOP server!
> > > startkde: Shutting down...
> > > Warning: connect() failed: : No such file or directory
> > > Error: Can't contact kdeinit!
> > > startkde: Running shutdown scripts...
> > > startkde: Done.
> > >
> > > *errors file*
> > >
> > > Loop: WARNING! Signal 'SIGINT not installed in process with
> > pid '51620'.
> > > Loop: WARNING! Signal 'SIGTERM not installed in process with
> pid
> > > '51620'.
> > > Loop: WARNING! Signal 'SIGHUP not installed in process with
> > pid '51620'.
> > >
> > >
> > > *NX Log*
> > >
> > > HELLO NXSERVER - Version 1.5.0-60 OS (GPL)
> > > NX> 105 hello NXCLIENT - Version 1.5.0
> > > NX> 134 Accepted protocol: 1.5.0
> > > NX> 105 SET SHELL_MODE SHELL
> > > NX> 105 SET AUTH_MODE PASSWORD
> > > NX> 105 login
> > > NX> 101 User: latez
> > > NX> 102 Password:
> > > Info: Auth method: passdb userdb check
> > >
> > > NX> 103 Welcome to: Nemesis user: latez
> > > NX> 105 listsession --user="latez"
> --status="suspended,running"
> > > --geometry="1280x1024x32+render" --type="unix-kde"
> > > NX> 127 Sessions list of user 'latez' for reconnect:
> > >
> > > Display Type Session ID
> Options
> > > Depth Screen Status Session Name
> > > ------- ---------------- --------------------------------
> > --------
> > > ----- -------------- -----------
> ------------------------------
> > >
> > >
> > > NX> 148 Server capacity: not reached for user: latez
> > > NX> 105 startsession --link="lan" --backingstore="1"
> > > --encryption="1" --cache="16M" --images="64M" --media="0"
> > > --session="Nemesis" --type="unix-kde" --geometry="1280x966"
> > > --kbtype="pc102/en_US" --screeninfo="1280x966x32+render"
> > >
> > >
> >
> &link=lan&backingstore=1&encryption=1&cache=16M&images=64M&media=0&session=Nemesis&type=unix-kde&geometry=1280x966&kbtype=pc102/en_US&screeninfo=1280x966x32+render&clientproto=1.5.0&user=latez&userip=
> 204.153.88.2
> > <http://204.153.88.2>
> > >
> > <http://204.153.88.2
> >&uniqueid=1FB8FE831D3243D9B3B6714FFE369367&display=1033&host=127.0.0.1
> > <http://127.0.0.1>
> > > <http://127.0.0.1>
> > > NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL)
> > > NX> 700 Session id:
> Nemesis-1033-1FB8FE831D3243D9B3B6714FFE369367
> > > NX> 705 Session display: 1033
> > > NX> 703 Session type: unix-kde
> > > NX> 701 Proxy cookie: b72a5eaf559f72e59e7ffb9f0875e2e3
> > > NX> 702 Proxy IP: 127.0.0.1 <http://127.0.0.1> <
> http://127.0.0.1>
> > > NX> 706 Agent cookie: b72a5eaf559f72e59e7ffb9f0875e2e3
> > > NX> 704 Session cache: unix-kde
> > > NX> 707 SSL tunneling: 1
> > > NX> 1009 Session status: starting
> > > NX> 1004 Error: NX Agent exited with exit status 1.
> > > NX> 1006 Session status: closed
> > > NX> 105 NX> 596 Session startup failed.
> > > NX> 1001 Bye.
> > > quit
> > > Quit
> > > NX> 999 Bye
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > ________________________________________________________________
> > > Were you helped on this list with your FreeNX problem?
> > > Then please write up the solution in the FreeNX Wiki/FAQ:
> > > http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
> > > Don't forget to check the NX Knowledge Base:
> > > http://www.nomachine.com/kb/
> > >
> > > ________________________________________________________________
> > > FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> > <mailto:FreeNX-kNX at kde.org>
> > > https://mail.kde.org/mailman/listinfo/freenx-knx
> > > ________________________________________________________________
> >
> > ________________________________________________________________
> > Were you helped on this list with your FreeNX problem?
> > Then please write up the solution in the FreeNX Wiki/FAQ:
> > http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
> > Don't forget to check the NX Knowledge Base:
> > http://www.nomachine.com/kb/
> >
> > ________________________________________________________________
> > FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> > <mailto:FreeNX-kNX at kde.org>
> > https://mail.kde.org/mailman/listinfo/freenx-knx
> > ________________________________________________________________
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > ________________________________________________________________
> > Were you helped on this list with your FreeNX problem?
> > Then please write up the solution in the FreeNX Wiki/FAQ:
> > http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
> > Don't forget to check the NX Knowledge Base:
> > http://www.nomachine.com/kb/
> >
> > ________________________________________________________________
> > FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> > https://mail.kde.org/mailman/listinfo/freenx-knx
> > ________________________________________________________________
>
> ________________________________________________________________
> Were you helped on this list with your FreeNX problem?
> Then please write up the solution in the FreeNX Wiki/FAQ:
> http://openfacts.berlios.de/index-en.phtml?title=FreeNX_FAQ
> Don't forget to check the NX Knowledge Base:
> http://www.nomachine.com/kb/
>
> ________________________________________________________________
> FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20080820/0e2ed8e6/attachment.html>
More information about the FreeNX-kNX
mailing list