[FreeNX-kNX] nxagent error?

Thu Jan 5 11:23:00 UTC 2006

Um tnks!
i get the V0.5.0 in repository SVN
and dont happen the error =]

[]'s

2006/1/4, Brendan <brendan at carramar.com>:
>
> GBR wrote:
>
> I link /usr/NX/bin/nxagent in /usr/bin
> and authentication ok!! =]
> but...
>
> if i use client windows, occurs this error:
>
> NXPROXY - Version 1.5.0
>
> Copyright  2001, 2005 NoMachine.
> See http://www.nomachine.com/ for more information.
>
> Info: Proxy running in client mode with pid '3856'.
> Info: Connecting to remote host '10.62.102.249:5040'.
> Info: Connection to remote proxy '10.62.102.249:5040' established.
> Info: Synchronizing local and remote caches.
> Info: Handshaking with remote proxy completed.
> info: Not using NX delta compression.
> Info: Using lan link parameters 16384/8/0/0.
> Info: Using pack method '16m-jpeg-9' with session 'unix-kde'.
> Info: Not using ZLIB stream compression.
> Info: Not using remote ZLIB stream compression.
> Info: Not using persistent cache.
> Info: Using remote server '10.62.102.249:5040'.
> Info: Starting X protocol compression.
> Warning: Cookie mismatch in the authentication data.
> Info: End of session requested by remote proxy.
> Info: Shutting down the link and exiting.
>
> in client linux is ok!
>
> anyone know this?
>
>
> 2006/1/4, Brendan <brendan at carramar.com>:
>
> >  terander at guard.zapto.org wrote:
> >
> >  Hi Sr.s,
> >
> > I need help, the auth is ok, but after occurs this error:
> >
> > nxserver.log
> >
> > NX> 705 Session display: 1017
> > NX> 703 Session type: unix-kde
> > NX> 701 Proxy cookie: dbeb0924eabd1f6a3fa015caa8b8526a
> >
> > NX> 702 Proxy IP: 10.62.102.167
> > NX> 706 Agent cookie: e411ccab27218aabb20696fce9bd16a5
> > NX> 704 Session cache: unix-kde
> >
> > NX> 707 SSL tunneling: 0
> > NX> 1004 Error: Session did not start.
> > NX> 504 Session startup failed.
> > NX> 999 Bye
> > NX> 1004 Error: nxagent failed to start. Session timed out.
> >                 Blocking 1017 again ...
> >
> > NX> 1001 Bye.
> > NX> 504 Session startup failed.
> >
> >  Have you tried to enable ssl encryption in the client ? If you're server
> > is behind a fw/router that does port-forwarding of ssh (TCP/22), then you
> > need to enable ssl.
> >
> > If not, you can try starting nxagent in a console-window to see if you get
> >
> > any errors - there was a discussion here earlier on how to do that.
> > If I remember correctly, I think I had something similar to this after a
> > upgrade of FreeNX, and in my case it was only resolved by completely
> >
> > removing FreeNX + config, and reinstall it... (but this may be something
> > completely different since my memory may be faulty on this ;-))
> >
> >        /Terje
> >
> > _______________________________________________
> > FreeNX-kNX mailing list
> >
> > FreeNX-kNX at kde.org
> >
> > https://mail.kde.org/mailman/listinfo/freenx-knx
> >
> >  I recently built freenx from scratch on a Sparc/Debian box, and had
> > problems with nxagent, which was hard to troubleshoot.  I've written up the
> > details, and will post it somewhere useful sometime, but here's the section
> > on how I managed to get nxagent working.  Note that I used the commercial
> > directory structure (/usr/NX), not the freenx structure under var.......
> >
> >  Library Troubleshooting
> > -----------------------
> > 12.  After authentication, my session startup failed.
> >
> >     NX> 1004 Error: nxagent failed to start. Session timed out.
> >      NX> 1001 Bye.
> >
> > So it looks like nxagent isn't working.  Trying to run nxagent manually
> > fails, so it looks like I haven't built it yet.  Or rather, it has installed
> > it elsewhere!  I searched and found the (new) version and copied it across:
> >     cp /usr/X11R6/bin/nxagent /usr/NX/bin
> >
> > However, nxagent was still failing.  Tried to test it using instructions
> > from the mailing list:
> >     LD_LIBRARY_PATH="/usr/NX/lib" /usr/NX/bin/nxagent :1000
> >
> >     /usr/NX/bin/nxagent: error while loading shared libraries:
> > /usr/NX/lib/libXext.so.6: ELF file data encoding not big-endian
> >
> > Again, it appears that the make install in the X11 directory copies
> > stuff into the X11R6 directory, so I need to update the NX/lib:
> >
> >     cp /usr/X11R6/lib/libXext.so.6.4 /usr/NX/lib/
> >     cp /usr/X11R6/lib/libXrender.so.1.2 /usr/NX/lib/
> >     cp /usr/X11R6/lib/libX11.so.6.2 /usr/NX/lib/
> >
> > Yes, I know, I should have linked it.  But it was late!
> >
> >
> >
> > Of course, your problem could be completely different, but you never
> > know!
> >
> > regards,
> >
> > Brendan.
> >
> >
> > _______________________________________________
> > FreeNX-kNX mailing list
> > FreeNX-kNX at kde.org
> > https://mail.kde.org/mailman/listinfo/freenx-knx
> >
> >
> >
>
>
> --
> ---------||----------
> .: Guilherme BR :.
>
> ------------------------------
>
> _______________________________________________
> FreeNX-kNX mailing list
> FreeNX-kNX at kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
>
>  I have the same problem, and I have read that this is because the new !M
> client (1.5) plays differently to the old one (ver 1.4).  The answer may
> lie in setting a variable in the freenx server
> [yourpathhere]/NX/etc/node.conf, I just haven't got around to trying it
> yet.  The parameter is something like:
>
> ENABLE_1_5_0_BACKEND
>
> If you do a search I'm sure you'll find lots of stuff.
>
> regards,
>
> Brendan.
>
>
> _______________________________________________
> FreeNX-kNX mailing list
> FreeNX-kNX at kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
>
>
>

--
---------||----------
.: Guilherme BR :.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20060105/222a163a/attachment.html>