[FreeNX-kNX] nxagent error?

[GBR]

I link /usr/NX/bin/nxagent in /usr/bin
and authentication ok!! =]
but...

if i use client windows, occurs this error:

NXPROXY - Version 1.5.0

Copyright  2001, 2005 NoMachine.
See http://www.nomachine.com/ for more information.

Info: Proxy running in client mode with pid '3856'.
Info: Connecting to remote host '10.62.102.249:5040'.
Info: Connection to remote proxy '10.62.102.249:5040' established.
Info: Synchronizing local and remote caches.
Info: Handshaking with remote proxy completed.
info: Not using NX delta compression.
Info: Using lan link parameters 16384/8/0/0.
Info: Using pack method '16m-jpeg-9' with session 'unix-kde'.
Info: Not using ZLIB stream compression.
Info: Not using remote ZLIB stream compression.
Info: Not using persistent cache.
Info: Using remote server '10.62.102.249:5040'.
Info: Starting X protocol compression.
Warning: Cookie mismatch in the authentication data.
Info: End of session requested by remote proxy.
Info: Shutting down the link and exiting.

in client linux is ok!

anyone know this?


2006/1/4, Brendan <brendan at carramar.com>:
>
> terander at guard.zapto.org wrote:
>
>  Hi Sr.s,
>
> I need help, the auth is ok, but after occurs this error:
>
> nxserver.log
>
> NX> 705 Session display: 1017
> NX> 703 Session type: unix-kde
> NX> 701 Proxy cookie: dbeb0924eabd1f6a3fa015caa8b8526a
> NX> 702 Proxy IP: 10.62.102.167
> NX> 706 Agent cookie: e411ccab27218aabb20696fce9bd16a5
> NX> 704 Session cache: unix-kde
> NX> 707 SSL tunneling: 0
> NX> 1004 Error: Session did not start.
> NX> 504 Session startup failed.
> NX> 999 Bye
> NX> 1004 Error: nxagent failed to start. Session timed out.
>                 Blocking 1017 again ...
> NX> 1001 Bye.
> NX> 504 Session startup failed.
>
>  Have you tried to enable ssl encryption in the client ? If you're server
> is behind a fw/router that does port-forwarding of ssh (TCP/22), then you
> need to enable ssl.
>
> If not, you can try starting nxagent in a console-window to see if you get
> any errors - there was a discussion here earlier on how to do that.
> If I remember correctly, I think I had something similar to this after a
> upgrade of FreeNX, and in my case it was only resolved by completely
> removing FreeNX + config, and reinstall it... (but this may be something
> completely different since my memory may be faulty on this ;-))
>
>        /Terje
>
> _______________________________________________
> FreeNX-kNX mailing list
> FreeNX-kNX at kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
>
>  I recently built freenx from scratch on a Sparc/Debian box, and had
> problems with nxagent, which was hard to troubleshoot.  I've written up the
> details, and will post it somewhere useful sometime, but here's the section
> on how I managed to get nxagent working.  Note that I used the commercial
> directory structure (/usr/NX), not the freenx structure under var.......
>
>  Library Troubleshooting
> -----------------------
> 12.  After authentication, my session startup failed.
>
>     NX> 1004 Error: nxagent failed to start. Session timed out.
>     NX> 1001 Bye.
>
> So it looks like nxagent isn't working.  Trying to run nxagent manually
> fails, so it looks like I haven't built it yet.  Or rather, it has installed
> it elsewhere!  I searched and found the (new) version and copied it across:
>     cp /usr/X11R6/bin/nxagent /usr/NX/bin
>
> However, nxagent was still failing.  Tried to test it using instructions
> from the mailing list:
>     LD_LIBRARY_PATH="/usr/NX/lib" /usr/NX/bin/nxagent :1000
>
>     /usr/NX/bin/nxagent: error while loading shared libraries:
> /usr/NX/lib/libXext.so.6: ELF file data encoding not big-endian
>
> Again, it appears that the make install in the X11 directory copies stuff
> into the X11R6 directory, so I need to update the NX/lib:
>
>     cp /usr/X11R6/lib/libXext.so.6.4 /usr/NX/lib/
>     cp /usr/X11R6/lib/libXrender.so.1.2 /usr/NX/lib/
>     cp /usr/X11R6/lib/libX11.so.6.2 /usr/NX/lib/
>
> Yes, I know, I should have linked it.  But it was late!
>
>
>
> Of course, your problem could be completely different, but you never know!
>
> regards,
>
> Brendan.
>
> --
> ------------------------------------------------
> Email:    brendan at carramar.com
> LinkedIn: https://www.linkedin.com/e/fps/675274/
>
>
> _______________________________________________
> FreeNX-kNX mailing list
> FreeNX-kNX at kde.org
> https://mail.kde.org/mailman/listinfo/freenx-knx
>
>
>


--
---------||----------
.: Guilherme BR :.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20060104/94375875/attachment.html>