AW: Re: Import view does not show file protection state of images on SDcard

[Christian Graesser]

I tried it with Appimage, No difference. File protection set in the camera is not visible in the Import tool. The Icon is visible and the writeprotect can be set in import tool. After having set it the file protection in import tool an inserting the SD card into the cam the protection is not  visible in the camera. I seems the information exchange about fileprotection from and to SD-card is not working anymore.
I used that method with file protect probably 2 years ago, always inserting the SD card into the laptop.
The reason why I use that procedure with file protection is, that in the camera I can review the images quickly with respect to sharpness and whether eyes are open ...
In the digikam import tool I don't have a quick zoom-in tool like RawTherapee has (called inspector) thus I do it in the camera, by labelling the image with file protection that I could see in the import tool earlier.
Olympus EM-1 Mark ii does not have another marking or rating tool.
How do you review the images for sharpness or "eye open", before copying all to the Laptop?
Best regardsChristian 


Yahoo Mail: Suchen, organisieren, erobern 
 
  Am Fr., Aug. 8, 2025 at 13:27 schrieb Maik Qualmann<metzpinguin at gmail.com>:   Hi Christian,

Okay, the screenshot is fine, but with larger thumbnails, the icon turns into a 
folder with a star, I forgot that.
Please test the AppImage anyway.

Maik

Am Freitag, 8. August 2025, 13:20:59 Mitteleuropäische Sommerzeit schrieb Maik 
Qualmann:
> Hi Christian,
> 
> Your screenshot of the import window looks strange. The icons in the
> properties sidebar are from Breeze and OK. But the folder icon in the
> thumbnail in the upper right corner is incorrect. There should be a star
> icon there. I can't explain why.
> 
> Please test our AppImage to see if it displays correctly.
> 
> Maik
> 
> Am Freitag, 8. August 2025, 09:27:59 Mitteleuropäische Sommerzeit schrieb
> 
> Christian Graesser:
> >  Hi Maik,
> > 
> > Yes I posted 2 times, was not sure i still was registered. So I registered
> > with a new mail address and unregistered from my old email. I plug the
> > SD-card into the Laptop - I don't use GPhoto.The camera properties seem to
> > be read in a wrong way: It shows here "writable" (german=Schreibbar) I
> > shoot in RAW and JPEG at same time. Both have the same "Schreibbar =
> > Writeable"
> > 
> > 
> > The camera shows the protection of the same image (in the center)
> > Thanks
> > Great program I use it since many years on Manjaro Linux.
> > Best Regards Christian
> > 
> >    Den fredag 8 augusti 2025 kl. 08:18:09 CEST, Maik Qualmann
> > 
> > <metzpinguin at gmail.com> skrev:
> >  Hi Christian,
> > 
> > Selecting only "locked" entries works here.
> > You opened two posts and did you also read Gilles' reply?
> > With GPhoto2, it may depend on the device whether the transfer of the
> > "locked" information is supported or whether GPhoto2 supports it.
> > Has it ever worked with your camera?
> > 
> > Maik
> > 
> > Am Donnerstag, 7. August 2025, 22:51:52 Mitteleuropäische Sommerzeit
> > schrieb> 
> > Christian Graesser:
> > >  Hi Maik, I use BreezeLight, and see the Lock icon in the menues,
> > >  "select
> > > 
> > > protected" and "invert protection"  (Free translated from germen menues
> > > )
> > > The images are protected inside Olympus E-M1 Mark II.
> > > When I press select protected none are selected
> > > Something else I can try?
> > > //Christian
> > > 
> > >    Den torsdag 7 augusti 2025 kl. 22:38:21 CEST, Maik Qualmann
> > > 
> > > <metzpinguin at gmail.com> skrev:
> > >  Tested here with my Nikon via GPhoto2 network PTP, the locked images
> > >  are
> > > 
> > > displayed in digiKam with a lock icon.
> > > Perhaps you're not using the Breeze icon theme, and the lock icon isn't
> > > available?
> > > 
> > > Maik
> > > 
> > > Am Donnerstag, 7. August 2025, 21:52:04 Mitteleuropäische Sommerzeit
> > > schrieb>
> > > 
> > > Christian Graesser:
> > > > Hi,
> > > > 
> > > > Usually I review the images using the camera and those with good
> > > > quality
> > > > then I mark inside the camera with "file protection".
> > > > 
> > > > Previously I could see whether a file was protected when I import it
> > > > using
> > > > the SD card in the laptop. Then I could use the menu "select
> > > > protected"
> > > > and
> > > > could download them. The protected icon = "Lock" is not visible any
> > > > more
> > > > in
> > > > any image.
> > > > 
> > > > What is wrong here?
> > > > 
> > > > I use installed DigiKam 8.7 on Manjaro Linux.
> > > > 
> > > > 
> > > > Thanks for  help
> > > > 
> > > > Christian




  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/digikam-users/attachments/20250809/3b618fa1/attachment.htm>