Import view does not show file protection state of images on SDcard

[Maik Qualmann]

Hi Christian,

Okay, the screenshot is fine, but with larger thumbnails, the icon turns into a 
folder with a star, I forgot that.
Please test the AppImage anyway.

Maik

Am Freitag, 8. August 2025, 13:20:59 Mitteleuropäische Sommerzeit schrieb Maik 
Qualmann:
> Hi Christian,
> 
> Your screenshot of the import window looks strange. The icons in the
> properties sidebar are from Breeze and OK. But the folder icon in the
> thumbnail in the upper right corner is incorrect. There should be a star
> icon there. I can't explain why.
> 
> Please test our AppImage to see if it displays correctly.
> 
> Maik
> 
> Am Freitag, 8. August 2025, 09:27:59 Mitteleuropäische Sommerzeit schrieb
> 
> Christian Graesser:
> >  Hi Maik,
> > 
> > Yes I posted 2 times, was not sure i still was registered. So I registered
> > with a new mail address and unregistered from my old email. I plug the
> > SD-card into the Laptop - I don't use GPhoto.The camera properties seem to
> > be read in a wrong way: It shows here "writable" (german=Schreibbar) I
> > shoot in RAW and JPEG at same time. Both have the same "Schreibbar =
> > Writeable"
> > 
> > 
> > The camera shows the protection of the same image (in the center)
> > Thanks
> > Great program I use it since many years on Manjaro Linux.
> > Best Regards Christian
> > 
> >     Den fredag 8 augusti 2025 kl. 08:18:09 CEST, Maik Qualmann
> > 
> > <metzpinguin at gmail.com> skrev:
> >  Hi Christian,
> > 
> > Selecting only "locked" entries works here.
> > You opened two posts and did you also read Gilles' reply?
> > With GPhoto2, it may depend on the device whether the transfer of the
> > "locked" information is supported or whether GPhoto2 supports it.
> > Has it ever worked with your camera?
> > 
> > Maik
> > 
> > Am Donnerstag, 7. August 2025, 22:51:52 Mitteleuropäische Sommerzeit
> > schrieb> 
> > Christian Graesser:
> > >  Hi Maik, I use BreezeLight, and see the Lock icon in the menues,
> > >  "select
> > > 
> > > protected" and "invert protection"  (Free translated from germen menues
> > > )
> > > The images are protected inside Olympus E-M1 Mark II.
> > > When I press select protected none are selected
> > > Something else I can try?
> > > //Christian
> > > 
> > >    Den torsdag 7 augusti 2025 kl. 22:38:21 CEST, Maik Qualmann
> > > 
> > > <metzpinguin at gmail.com> skrev:
> > >  Tested here with my Nikon via GPhoto2 network PTP, the locked images
> > >  are
> > > 
> > > displayed in digiKam with a lock icon.
> > > Perhaps you're not using the Breeze icon theme, and the lock icon isn't
> > > available?
> > > 
> > > Maik
> > > 
> > > Am Donnerstag, 7. August 2025, 21:52:04 Mitteleuropäische Sommerzeit
> > > schrieb>
> > > 
> > > Christian Graesser:
> > > > Hi,
> > > > 
> > > > Usually I review the images using the camera and those with good
> > > > quality
> > > > then I mark inside the camera with "file protection".
> > > > 
> > > > Previously I could see whether a file was protected when I import it
> > > > using
> > > > the SD card in the laptop. Then I could use the menu "select
> > > > protected"
> > > > and
> > > > could download them. The protected icon = "Lock" is not visible any
> > > > more
> > > > in
> > > > any image.
> > > > 
> > > > What is wrong here?
> > > > 
> > > > I use installed DigiKam 8.7 on Manjaro Linux.
> > > > 
> > > > 
> > > > Thanks for  help
> > > > 
> > > > Christian