missing thumbails in digikam

Sun Jan 8 22:07:19 GMT 2017

Ok, next stage is simple.

1/ create fe fresh account on your system
2/ log to this account
3/ start digiKam and create a clean setup with an empty collection
4/ import suspect JPEG in your collection
5/ check if problem is reproducible.

Gilles Caulier

2017-01-08 20:53 GMT+01:00 Frédéric Chaume <frederic.chaume at gmail.com>:

> Hi Gilles
>
>
> Done
>
> (but ity was working like this since months)
>
> frederic at Fred-PC ~/Images/Public/2016/2016-01_ballade_plougrescant $ ls
> 20160212_164025.jpg  20160212_165705.jpg  20160212_165732.jpg
> 20160213_103343.jpg
> 20160212_164033.jpg  20160212_165709.jpg  20160212_165736.jpg
> 20160212_164235.jpg  20160212_165723.jpg  20160212_165739.jpg
>
>
> and
>
> igikam.dimg: "/home/frederic/Images/Public/2016/2016-01_ballade_
> plougrescant/20160213_103343.jpg"  : JPEG file identified
> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
> digikam.general: One job is done
>
> .....
>
>
> but no change
>
> disk space is 88% full
>
> regards
>
> frederic
>
>
>
>
> Le 08/01/2017 à 20:18, Gilles Caulier a écrit :
>
> Nothing special here. No error reported.
>
> Just to test. Can you change a file name from :
>
> 2016-01 ballade à Plougrescant/20160212_165723.jpg
>
> 2016-01_ballade_a_Plougrescant/20160212_165723.jpg
>
> ==> remove space and replace 'à' by 'a'.
>
> Gilles Caulier
>
> 2017-01-08 20:15 GMT+01:00 Frédéric Chaume <frederic.chaume at gmail.com>:
>
>> Hi Gilles
>>
>>
>> here are the trace after F5
>>
>> digikam.general: One job is done
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_165723.jpg"  : JPEG file identified
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_165739.jpg"  : JPEG file identified
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_165705.jpg"  : JPEG file identified
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_165736.jpg"  : JPEG file identified
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_164235.jpg"  : JPEG file identified
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.general: One job is done
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_165732.jpg"  : JPEG file identified
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_164025.jpg"  : JPEG file identified
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.general: One job is done
>> digikam.general: One job is done
>> digikam.general: Cancel Main Thread
>> digikam.general: One job is done
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_164033.jpg"  : JPEG file identified
>> digikam.dimg: "/home/frederic/Images/Public/2016/2016-01 ballade à
>> Plougrescant/20160212_164033.jpg"  : JPEG file identified
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>> digikam.general: One job is done
>> digikam.general: List of Pending Jobs is empty
>> digikam.general: Event is dispatched to desktop notifier through DBUS
>> digikam.general: Cancel Main Thread
>> digikam.general: Cancel Main Thread
>> digikam.geoiface: ----
>>
>>
>> Le 08/01/2017 à 17:50, Gilles Caulier a écrit :
>>
>> no. there is no suitable debug trace here. When you is in suppected album
>> press F5 to force to refresh thumbnails.
>>
>> What's the trace on the console in this case.
>>
>> thumb DB is small on start because it's empty and mus be populated step
>> by step or with maintenance tool.
>>
>> Gilles Caulier
>>
>> 2017-01-08 17:21 GMT+01:00 Frédéric Chaume < <frederic.chaume at gmail.com>
>> frederic.chaume at gmail.com>:
>>
>>> Hi Gilles
>>>
>>> I'm using 5.4.0-01
>>>
>>> proceeded as you suggested
>>>
>>> renamed the db and start it again
>>>
>>> -rwxrwxr-x 1 frederic users 402M janv.  8 13:32 thumbnails-digikam.db.sav
>>> -rwxrwxr-x 1 frederic users 4,1M janv.  8 17:08 recognition.db
>>> -rwxrwxr-x 1 frederic users  21M janv.  8 17:08 digikam4.db
>>> -rwxrwxr-x 1 frederic users 7,5M janv.  8 17:11 thumbnails-digikam.db
>>>
>>> unfortunately the result is the same :-(, still missing the sames
>>>
>>> (I suppose the difference between size will be reduced  as I will go
>>> trhough each folder, right ?)
>>>
>>>
>>> when I look at the logs from the terminal I found the lines below
>>> relatives to one of the picture not shown
>>>
>>> digikam.dimg: "/home/frederic/Images/Public/
>>> 2016/2016-01xxxxxx/20160212_165709.jpg"  : JPEG file identified
>>> digikam.metaengine: Orientation => Exif.Image.Orientation =>  1
>>> digikam.geoiface: ----
>>> Recreating ksycoca file ("/home/frederic/.cache/ksycoc
>>> a5_fr_ao0C4YqXkXGF5j1o5s7kezL5ncg=", version 303)
>>>
>>> can it help ?
>>>
>>> regards
>>>
>>> Le 08/01/2017 à 14:37, Gilles Caulier a écrit :
>>>
>>> Which digiKam version do you use ?
>>>
>>> There is no special settings in RC files for thumbnails. But the digikam
>>> thumbs database store all wavelets small images. Stop digiKam, rename this
>>> database file, and restart, it will be created from scratch. It's solve
>>> your problem ?
>>>
>>> Gilles Caulier
>>>
>>> 2017-01-08 13:27 GMT+01:00 Frédéric Chaume < <frederic.chaume at gmail.com>
>>> frederic.chaume at gmail.com>:
>>>
>>>> Hi All
>>>>
>>>>
>>>> when looking some collection, I see several thumbnails are missing.
>>>>
>>>> I have for example one which contains 10 pictures (as shown in the
>>>> collection title and in the folder), but only see 3 thumbnails and I have
>>>> no filter activated
>>>>
>>>> hopefully pictures are still present in the folder (in bold those I see
>>>> in digikam):
>>>>
>>>> ~/Images/Public/2016/2016-01$ ls -alh
>>>> total 26492drwxrwxr-x 1 frederic users 4,0K nov.  26 11:18 .
>>>> drwxrwxr-x 1 frederic users  12K déc.  25 12:00 ..
>>>> *-rwxrwxr-x 1 frederic users 1,7M nov.  26 11:18 20160212_164025.jpg*
>>>> -rwxrwxr-x 1 frederic users 2,1M nov.  26 11:17 20160212_164033.jpg
>>>> -rwxrwxr-x 1 frederic users 2,4M nov.  26 11:18 20160212_164235.jpg
>>>> *-rwxrwxr-x 1 frederic users 2,7M nov.  26 11:17 20160212_165705.jpg*
>>>> -rwxrwxr-x 1 frederic users 2,1M nov.  26 11:17 20160212_165709.jpg
>>>> -rwxrwxr-x 1 frederic users 4,0M nov.  26 11:18 20160212_165723.jpg
>>>> -rwxrwxr-x 1 frederic users 3,5M nov.  26 11:17 20160212_165732.jpg
>>>> -rwxrwxr-x 1 frederic users 3,8M nov.  26 11:18 20160212_165736.jpg
>>>> -rwxrwxr-x 1 frederic users 3,4M nov.  26 11:18 20160212_165739.jpg
>>>> *-rwxrwxr-x 1 frederic users 631K nov.  26 11:17 20160213_103343.jpg*
>>>>
>>>>
>>>> I have created a new configuration from scratch (after removing
>>>> digikamrc) but same result
>>>>
>>>>
>>>> thanks for helping
>>>>
>>>>
>>>> regards
>>>>
>>>> frederic
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/digikam-users/attachments/20170108/f0d058ce/attachment.html>