[kde] [Bug 409112] kdeinit5 (kdeinit5), signal: Aborted Using host libthread_db library "/lib64/libthread_db.so.1"

[bugzilla_noreply at kde.org]

https://bugs.kde.org/show_bug.cgi?id=409112

--- Comment #2 from pierrelud at yahoo.com ---
No. This usually happens after restart. With after I mean specifically open day
FF with some tabs and Thunderbird and Dolpin being open.

I also see this happen for the first time since upgrading to openSUSE Leap 15.1
from 15.0

The NVIDIA driver was not changed during this upgrade.

What debug libs do I need to load to my KDE openSUSE so all symbols are
resolved? Then I can raise it with openSUSE + NVIDIA right?

(I know/think there are some newer NVIDIA driver in development or
experimental. Although older ones also seem quite experimental).

Mine:

pl at lgaz:~> sudo lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [NVS 3100M] (rev
a2)
pl at lgaz:~> sudo lscpu | grep Arch
Architecture:        x86_64

pl at lgaz:~> sudo hwinfo --gfxcard
34: PCI 100.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.386]
  Unique ID: VCu0.xVMssAe1k49
  Parent ID: vSkL.HBIEsup+SaA
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "nVidia GT218M [NVS 3100M]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0a6c "GT218M [NVS 3100M]"
  SubVendor: pci 0x17aa "Lenovo"
  SubDevice: pci 0x215c 
  Revision: 0xa2
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xcc000000-0xccffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xce000000-0xcfffffff (ro,non-prefetchable)
  I/O Ports: 0x2000-0x2fff (rw)
  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
  IRQ: 29 (416731 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000A6Csv000017AAsd0000215Cbc03sc00i00"
  Driver Info #0:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #1:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #31 (PCI bridge)

Primary display adapter: #34

-- 
You are receiving this mail because:
You are the assignee for the bug.