[Kwintv] kdetv problem: no channels

[eGore]

Hi,

I guess that's the same problem I had. The problem is, that the included
v4l in gentoo's kernel have an issue with v4l1. The issue has been fixed
by the v4l author and I think that the upcoming kernel 2.6.10 has
included these fixes (since the ChangeLog of the kernel maintainers
stated many changes to v4l after 2.6.9 has been released). So I think
you got 3 options:
a) Use the CVS of v4l
b) Try sys-kernel/development-sources-2.6.10_rc2
c) Try to get the v4l2 plugin to work (I'm not sure if it was a v4l1
issue only, so maybe that won't help)

I cannot prove this currently, since my cx8800 is approximatly 100 km up
north from the place where I'm typing this :D

Regards,
  Christoph


Am Samstag, den 20.11.2004, 18:15 +0100 schrieb Eggert Ehmke:
> Hello list,
> my system is a Gentoo Linux 2004.3 (kernel 2.6.9-gentoo--r4) with a Hauppauge 
> WinTV PCI-FM card. After installing the cx8800 module, I got tvtime to run. 
> However, kdetv does not work. It starts ok, but no channels. When I select 
> setup/video/configure plugin, the application crashes. These are the messages 
> in the shell when launching kdetv:
> 
> kdetv
> ALSA lib control.c:654:(snd_ctl_open_noupdate) Invalid CTL
> kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video plugins!
> kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins!
> kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins!
> Try to open v4l2 vbi device, libzvbi interface rev.
> $Id: io-v4l2.c,v 1.12 2002/11/30 02:37:18 mschimek Exp $Opened /dev/v4l/vbi0
> Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
> $Id: io-v4l2k.c,v 1.4 2003/02/16 18:58:07 mschimek Exp $Opened /dev/v4l/vbi0
> /dev/v4l/vbi0 (Hauppauge WinTV 34xxx models) is a v4l2 vbi device,
> driver cx8800, version 0x00000004
> Current scanning system is 625
> Querying current vbi parameters... success
> VBI capture parameters granted: format 59455247, 35468950 Hz, 2048 bpl, offs 
> 244, F1 6+17, F2 318+17, flags 00000000
> Nyquist check passed
> Request decoding of services 0x60000c7f
> Will decode services 0x0000041f
> Using streaming interface
> Fifo initialized
> Requesting streaming i/o buffers
> Try to open v4l vbi device, libzvbi interface rev.
> $Id: io-v4l.c,v 1.9 2002/11/30 02:37:18 mschimek Exp $Opened /dev/v4l/vbi0
> Driver name 'Hauppauge WinTV 34xxx models'
> Attempt to guess the videostandard
> Driver supports VIDIOCGTUNER: 0
> Videostandard is PAL/SECAM
> /dev/v4l/vbi0 (Hauppauge WinTV 34xxx models) is a v4l vbi device
> Hinted video standard 0, guessed 625
> Driver supports VIDIOCGVBIFMT, guessed videostandard 625
> Accept current vbi parameters
> Guessed videostandard 625
> Nyquist check passed
> Will decode services 0x0000041f
> Warning: no read select, reading will block
> Capture buffer allocated
> Successful opened /dev/v4l/vbi0 (Hauppauge WinTV 34xxx models)
> kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available
> _______________________________________________
> kwintv mailing list
> kwintv at kde.org
> https://mail.kde.org/mailman/listinfo/kwintv
>