[Kwintv] Problem to set-up KDETV

[Lucien Mathieu]

Hello,

	I have some problem to setup kdetv, any good advice on why it's 	not
finding my video device?

	lsmod is as follow
	
	bttv                  101504   0  (autoclean)
	i2c-algo-bit            8712   0  (autoclean) [bttv]
	soundcore               6692   7  (autoclean) [emu10k1 sound
							bttv]
	i2c-core               21060   0  (autoclean) [tuner 							tvaudio   
							msp3400    bttv 							i2c-algo-bit]
	videodev                9120   3  (autoclean) [bttv]

	config is as follow (I find it out on the web a tool to check my
	config, it's not coming from the kdetv web site though, could not 	find
anything on the kdetv web site)

	# i2c
	alias char-major-89 i2c-dev
	options i2c-core i2c_debug=1
	options i2c-algo-bit bit_test=1

	# bttv
	alias char-major-81 videodev
	alias char-major-81-0 bttv
	options bttv card=1 pll=0
	options bttv card=39 pll=0
	options tuner type=0 debug=0
	options msp3400 once=1 simple=1
	post-install bttv modprobe tuner; modprobe videodev

	xvinfo is getting me the following information:

	Adaptor #0: "video4linux"
	      encoding ID #21: "pal-svideo"
	      encoding ID #22: "ntsc-svideo"
	      encoding ID #23: "secam-svideo"
	      encoding ID #24: "palnc-svideo"
	      encoding ID #25: "palm-svideo"
	      encoding ID #26: "paln-svideo"
	      encoding ID #27: "ntscjp-svideo"

	It's all about I can get, but still the video device is not 	recognise
in kdetv... Pinnacle Miro PCTV

 	Ah yes the var/log as follow:

	May 16 01:20:50 localhost kernel: i2c-core.o: i2c core module version
2.8.4 (20040207)
	May 16 01:20:50 localhost kernel: Linux video capture interface: v1.00
	May 16 01:20:50 localhost kernel: bttv: driver version 0.7.108 loaded
May 16 01:20:50 localhost kernel: bttv: using 4 buffers with 2080k
(8320k total) for capture
May 16 01:20:50 localhost kernel: bttv: Bt8xx card found (0).
May 16 01:20:50 localhost kernel: bttv0: Bt878 (rev 17) at 00:07.0, irq:
18, latency: 64, mmio: 0xdddfe000
May 16 01:20:50 localhost kernel: bttv0: detected: Pinnacle PCTV
[card=39], PCI subsystem ID is 11bd:0012
May 16 01:20:50 localhost kernel: bttv0: using: Pinnacle PCTV
Studio/Rave [card=39,insmod option]
May 16 01:20:50 localhost kernel: bttv0: i2c: checking for MSP34xx @
0x80... found
May 16 01:20:50 localhost kernel: bttv0: miro: id=16 tuner=1
radio=fmtuner stereo=yes
May 16 01:20:50 localhost kernel: bttv0: using tuner=1
May 16 01:20:50 localhost kernel: bttv0: i2c: checking for MSP34xx @
0x80... found
May 16 01:20:50 localhost kernel: msp34xx: init: chip=MSP3450G-B8 +nicam
+simple +radio
May 16 01:20:50 localhost kernel: msp3410: daemon started
May 16 01:20:50 localhost kernel: bttv0: i2c: checking for TDA9875 @
0xb0... not found
May 16 01:20:50 localhost kernel: bttv0: i2c: checking for TDA7432 @
0x8a... not found
May 16 01:20:50 localhost kernel: tvaudio: TV audio decoder +
audio/video mux driver
May 16 01:20:50 localhost kernel: tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
May 16 01:20:50 localhost kernel: tuner: chip found @ 0xc2
May 16 01:20:50 localhost kernel: tuner(bttv): type forced to 0 (Temic
PAL (4002 FH5)) [insmod]
May 16 01:20:50 localhost kernel: tuner: type already set (0)
May 16 01:20:50 localhost kernel: bttv0: registered device video0
May 16 01:20:50 localhost kernel: bttv0: registered device vbi0
May 16 01:20:50 localhost kernel: bttv0: registered device radio0

	Thanks for your help...