[Kwintv] crash shortly after startup

[mattie]

Hi,

I'm new to using kdetv. I tested it and everthing went well. Then I  
discovered the teletext plugin. I found it amazing, however, after 10  
seconds or something, it crashed. I can still view television with tvtime,  
etc. When I start it up, I see a few frames of television, then it crashes  
with the following trace:

(no debugging symbols found)...Using host libthread_db library  
"/lib/tls/libthread_db.so.1".
(no debugging symbols found)...(no debugging symbols found)...(no  
debugging symbols found)...(no debugging symbols found)...(no debugging  
symbols found)...(no debugging symbols found)...(no debugging symbols  
found)...(no debugging symbols found)...(no debugging symbols found)...(no  
debugging symbols found)...(no debugging symbols found)...(no debugging  
symbols found)...(no debugging symbols found)...(no debugging symbols  
found)...(no debugging symbols found)...(no debugging symbols found)...(no  
debugging symbols found)...(no debugging symbols found)...(no debugging  
symbols found)...(no debugging symbols found)...(no debugging symbols  
found)...(no debugging symbols found)...(no debugging symbols found)...(no  
debugging symbols found)...(no debugging symbols found)...(no debugging  
symbols found)...(no debugging symbols found)...(no debugging symbols  
found)...(no debugging symbols found)...(no debugging symbols found)...(no  
debugging symbols found)...(no debugging symbols found)...(no debugging  
symbols found)...[Thread debugging using libthread_db enabled]
[New Thread 1102272064 (LWP 30851)]
[New Thread 1154943920 (LWP 30858)]
[Thread debugging using libthread_db enabled]
[New Thread 1102272064 (LWP 30851)]
[New Thread 1154943920 (LWP 30858)]
[Thread debugging using libthread_db enabled]
[New Thread 1102272064 (LWP 30851)]
[New Thread 1154943920 (LWP 30858)]
0xffffe410 in ?? ()
#0  0xffffe410 in ?? ()
#1  0xbffff008 in ?? ()
#2  0x00000002 in ?? ()
#3  0x00000000 in ?? ()
#4  0x419060fe in __lll_mutex_lock_wait () from /lib/tls/libpthread.so.0
#5  0x41902f60 in _L_mutex_lock_32 () from /lib/tls/libpthread.so.0
#6  0x00000000 in ?? ()
#7  0x00000000 in ?? ()
#8  0x415c0aa8 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3
#9  0x080f15b0 in ?? ()
#10 0x080f15d4 in ?? ()
#11 0x00000009 in ?? ()
#12 0x414147cd in QRecursiveMutexPrivate::lock ()
    from /usr/lib/qt3/lib/libqt-mt.so.3
#13 0x080f15b4 in ?? ()
#14 0x00000000 in ?? ()
#15 0x00000000 in ?? ()
#16 0x00000009 in ?? ()
#17 0x415c0aa8 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3
#18 0x0000000a in ?? ()
#19 0x00000000 in ?? ()
#20 0x41413fe2 in QMutex::lock () from /usr/lib/qt3/lib/libqt-mt.so.3
#21 0x080f15b0 in ?? ()
#22 0x41acc98c in select () from /lib/tls/libc.so.6
#23 0x4109ea83 in QEventLoop::processEvents ()
    from /usr/lib/qt3/lib/libqt-mt.so.3
#24 0x415cbb9c in qt_wait_timer_max () from /usr/lib/qt3/lib/libqt-mt.so.3
#25 0x00000000 in ?? ()
#26 0x00000001 in ?? ()
#27 0x00000001 in ?? ()
#28 0x00000000 in ?? ()
#29 0x415c1698 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3
#30 0x40f0a310 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3
#31 0x00000000 in ?? ()
#32 0x40f0a310 in ?? () from /usr/lib/qt3/lib/libqt-mt.so.3
#33 0x40e52980 in kde_malloc_is_used () from /usr/lib/libkdecore.so.4
#34 0x08275e28 in ?? ()
#35 0x418350a0 in XMapWindow () from /usr/X11R6/lib/libX11.so.6

In the console everything looks ok? :

[mattie at localhost mattie]$ kdetv
kdetv: WARNING: Sourcemanager: No screenwidget set! Cannot scan video  
plugins!
kdetv: WARNING: OSDManager: No screenwidget set! Cannot scan OSD plugins!
kdetv: WARNING: MiscManager: No screenwidget set! Cannot scan Misc plugins!
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd8000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd8000000
/dev/v4l/video0 [v4l2]: configuration done
Try to open v4l2 vbi device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.25 2004/02/18 07:56:45 mschimek Exp $Opened /dev/vbi
Try to open v4l2 (2002-10) vbi device, libzvbi interface rev.
$Id: io-v4l2k.c,v 1.18 2004/04/09 05:18:16 mschimek Exp $Opened /dev/vbi
/dev/vbi (BT878 video (Hauppauge (bt878))) is a v4l2 vbi device,
driver bttv, version 0x0000090f
Current scanning system is 625
Querying current vbi parameters... success
VBI capture parameters granted: format 59455247, 35468950 Hz, 2048 bpl,  
offs 244, F1 7+16, F2 319+16, flags 00000000
Nyquist check passed
Request decoding of services 0x60000c7f
Will decode services 0x0000041f
Using streaming interface
Fifo initialized
Requesting streaming i/o buffers
Mapping 16 streaming i/o buffers
Successful opened /dev/vbi (BT878 video (Hauppauge (bt878)))
QMetaObject::findSignal:ChannelEditor: Conflict with  
QListView::doubleClicked(QListViewItem*,const QPoint&,int)
kdetv: WARNING: MainWindow::setupInfraRed(): Lirc not available
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd8000000
/dev/video [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd8000000
/dev/v4l/video0 [v4l2]: configuration done
kv4lsetup: using X11 display :0.0
dga: version 2.0
mode: 1280x1024, depth=24, bpp=32, bpl=5120, base=0xd8000000
/dev/video [v4l2]: configuration done
KCrash: Application 'kdetv' crashing...

I looked for settings to reset, but except for the channels (which I want  
to keep), I did not find any..

How to make it work again? :) (I tried building the latest cvs version,  
but I got an error: "checking for X... configure: error: Can't find X  
includes. Please check your installation and add the correct paths!")

tia
mattie
-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/