[Kwintv] Re: QtVision - multiple tuner cards? (2)
Tilo Sloboda
tilo at unixgods.org
Sun Aug 24 19:31:54 CEST 2003
Drivers seem to be loaded fine.. at least the devices show up correctly,
but qtvision doesn't show anything when "source selection" dialog comes up..
Any hints or ideas how to debug this?
Tilo
# more /proc/video/dev/*
::::::::::::::
/proc/video/dev/vbi0
::::::::::::::
name : bttv vbi
type : VID_TYPE_CAPTURE|VID_TYPE_TELETEXT
hardware : 0x1
::::::::::::::
/proc/video/dev/vbi1
::::::::::::::
name : bttv vbi
type : VID_TYPE_CAPTURE|VID_TYPE_TELETEXT
hardware : 0x1
::::::::::::::
/proc/video/dev/video0
::::::::::::::
name : BT878(AVerMedia TVCapture 98)
type : VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_TELETEXT|VID_TYPE_OVERLAY
hardware : 0x1
::::::::::::::
/proc/video/dev/video1
::::::::::::::
name : BT878(AVerMedia TVCapture 98)
type : VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_TELETEXT|VID_TYPE_OVERLAY
hardware : 0x1
---- dmesg output follows as attachment ----
-------------- next part --------------
Linux version 2.4.20-20.9 (bhcompile at porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon Aug 18 11:27:43 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS)
BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
639MB LOWMEM available.
On node 0 totalpages: 163824
zone(0): 4096 pages.
zone(1): 159728 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=2.4.20-20.9 ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.20-20.9 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1729.029 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3447.19 BogoMIPS
Memory: 640504k/655296k available (1333k kernel code, 12228k reserved, 1001k data, 132k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 2100+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb550, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3099] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20265: IDE controller at PCI slot 00:0d.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD1200JB-75CRA0, ATA DISK drive
hdb: WDC WD1200JB-75CRA0, ATA DISK drive
blk: queue c03c5920, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03c5a64, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CD-R/RW DRIVE SW-248B, ATAPI CD/DVD-ROM drive
hdd: IBM-DHEA-38451, ATA DISK drive
blk: queue c03c5ec8, I/O limit 4095Mb (mask 0xffffffff)
hde: WDC WD1200AB-00CBA1, ATA DISK drive
blk: queue c03c61e8, I/O limit 4095Mb (mask 0xffffffff)
hdg: WDC WD1200AB-00CBA1, ATA DISK drive
blk: queue c03c664c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x1000-0x1007,0xa402 on irq 10
ide3 at 0x1800-0x1807,0xac02 on irq 10
hda: attached ide-disk driver.
hda: host protected area => 1
hda: setmax LBA 234441648, native 234375000
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: setmax LBA 234375120, native 234375000
hdb: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=16383/16/63, UDMA(33)
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
hdg: attached ide-disk driver.
hdg: host protected area => 1
hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
hdd: [PTBL] [1027/255/63] hdd1 hdd2 hdd3
hde: hde1
hdg: hdg1
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 00000090]
[events: 00000090]
md: autorun ...
md: considering hdg1 ...
md: adding hdg1 ...
md: adding hde1 ...
md: created md0
md: bind<hde1,1>
md: bind<hdg1,2>
md: running: <hdg1><hde1>
md: hdg1's event counter: 00000090
md: hde1's event counter: 00000090
kmod: failed to exec /sbin/modprobe -s -k md-personality-2, errno = 2
md: personality 2 is not loaded!
md :do_md_run() returned -22
md: md0 stopped.
md: unbind<hdg1,1>
md: export_rdev(hdg1)
md: unbind<hde1,0>
md: export_rdev(hde1)
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 283k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
ohci1394: $Rev: 693 $ Ben Collins <bcollins at debian.org>
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[e0024000-e00247ff] Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023] GUID[0013060000001e62] [Linux OHCI-1394]
ieee1394: NodeMgr: hotplug policy returned -2
ieee1394: Device added: Node[01:1023] GUID[0030e001e0000943] [Oxford Semiconductor Ltd. ]
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[01:1023]: Max speed [S400] - Max payload [2048]
scsi0 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)
$Rev: 707 $ James Goodwin <jamesg at filanet.com>
SBP-2 module load options:
- Max speed supported: S400
- Max sectors per I/O supported: 255
- Max outstanding commands supported: 64
- Max outstanding commands per lun supported: 1
- Serialized I/O (debug): no
- Exclusive login: yes
Vendor: Maxtor 6 Model: Y200P0 Rev:
Type: Direct-Access ANSI SCSI revision: 06
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
sda: unknown partition table
md: raid0 personality registered as nr 2
Journalled Block Device driver loaded
md: Autodetecting RAID arrays.
[events: 00000090]
[events: 00000090]
md: autorun ...
md: considering hde1 ...
md: adding hde1 ...
md: adding hdg1 ...
md: created md0
md: bind<hdg1,1>
md: bind<hde1,2>
md: running: <hde1><hdg1>
md: hde1's event counter: 00000090
md: hdg1's event counter: 00000090
md0: max total readahead window set to 512k
md0: 2 data-disks, max readahead per data-disk: 256k
raid0: looking at hde1
raid0: comparing hde1(117220672) with hde1(117220672)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdg1
raid0: comparing hdg1(117220672) with hde1(117220672)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: zone 0
raid0: checking hde1 ... contained as device 0
(117220672) is smallest!.
raid0: checking hdg1 ... contained as device 1
raid0: zone->nb_dev: 2, size: 234441344
raid0: current zone offset: 117220672
raid0: done.
raid0 : md_size is 234441344 blocks.
raid0 : conf->smallest->size is 234441344 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: updating md0 RAID superblock on device
md: hde1 [events: 00000091]<6>(write) hde1's sb offset: 117220672
md: hdg1 [events: 00000091]<6>(write) hdg1's sb offset: 117220672
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci-hcd 00:0c.2: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:0c.2: irq 5, pci mem e888d000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:0c.2 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:0c.2 PCI cache line size corrected to 64.
ehci-hcd 00:0c.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
Adding Swap: 1228964k swap-space (priority -1)
Adding Swap: 530136k swap-space (priority -2)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,67), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdc: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CD-R/RW SW-248B Rev: R500
Type: CD-ROM ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/1x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ip_tables: (C) 2000-2002 Netfilter core team
via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
divert: allocating divert_blk for eth0
eth0: VIA VT6102 Rhine-II at 0xc800, 00:50:2c:00:e4:35, IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link 45e1.
ip_tables: (C) 2000-2002 Netfilter core team
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.104 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:09.0, irq: 10, latency: 32, mmio: 0xe0020000
bttv0: detected: AVerMedia TVCapture 98 [card=13], PCI subsystem ID is 1461:0004
bttv0: using: BT878(AVerMedia TVCapture 98) [card=13,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [11]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Avermedia eeprom[0x4000]: tuner=2 radio:no remote control:no
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
i2c-core.o: client [Philips NTSC (FI1236,FM1236 and ] registered to adapter [bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 00:0a.0, irq: 5, latency: 32, mmio: 0xe0022000
bttv1: detected: AVerMedia TVCapture 98 [card=13], PCI subsystem ID is 1461:0004
bttv1: using: BT878(AVerMedia TVCapture 98) [card=13,autodetected]
bttv1: Hauppauge/Voodoo msp34xx: reset line init [11]
tuner: probing bt848 #1 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #1](pos. 0).
i2c-core.o: adapter bt848 #1 registered as adapter 1.
bttv1: Avermedia eeprom[0x4002]: tuner=2 radio:no remote control:no
bttv1: using tuner=2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv1: i2c: checking for MSP34xx @ 0x80... not found
bttv1: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
bttv1: i2c: checking for TDA9875 @ 0xb0... not found
bttv1: i2c: checking for TDA7432 @ 0x8a... not found
bttv1: PLL: 28636363 => 35468950 .. ok
bttv1: registered device video1
bttv1: registered device vbi1
cmpci: version $Revision: 5.64 $ time 11:33:01 Aug 18 2003
cmpci: found CM8738 adapter at io 0xb400 irq 11
cmpci: chip version = 055
cmpci: Enable SPDIF loop
bttv0: PLL can sleep, using XTAL (28636363).
tuner: TV freq (268435455.93) out of range (44-958)
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv1: PLL can sleep, using XTAL (28636363).
tuner: TV freq (8.25) out of range (44-958)
tuner: TV freq (14.25) out of range (44-958)
tuner: TV freq (20.25) out of range (44-958)
tuner: TV freq (26.25) out of range (44-958)
tuner: TV freq (32.25) out of range (44-958)
tuner: TV freq (38.25) out of range (44-958)
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
More information about the kwintv
mailing list