[Kwintv] qtvision vs

[Eric]

i had this same problem (with assertion failures) with my bttv card and 
qtvision. Make sure you are using the latest kernel 2.4.20 and patch it with 
the latest version of the bttv drivers. 0.9 something I believe. 
Hope that helps!

On Sunday 27 April 2003 10:26 pm, Everett Bennett wrote:
> I've download the CVS load of qtvision and had some degree of success.
> I currenly have audio, but no picture. Also, "qtvision" has locked up.
>
> I've compiled using this on a RedHat 9.0 system that was upgraded from
> RH 7.3:
>
>   KDEDIR=/usr;export KDEDIR
>   QTDIR=/usr/lib/qt-3.1;export QTDIR
>   KDEHOME=$HOME/.kde3
>   PATH=$QTDIR/bin:$KDEDIR/bin:$PATH
>   MANPATH=$QTDIR/doc/man:$MANPATH
>   LD_LIBRARY_PATH=$KDEDIR/lib:$QTDIR/lib:$LD_LIBRARY_PATH
>   echo $LD_LIBRARY_PATH
>
>          Change into the kdenonbeta directory:
>               cd kdenonbeta
>          Create a symbolic link to the kde-common/admin directory:
>               ln -s ../kde-common/admin admin
>          Execute the following commands (for "make install" you usually
> have to be
>          root):
>               make -f Makefile.cvs
>               ./configure
>
>              cd kwintv3
>               make && make install
>
> After I run "qtvision", I suggest the bt848 card, NTSC US, and Auto.
> I see this.  Any ideas?
>
> Everett
>
>
>
>
>
>
> luke2261> /usr/bin/qtvision
> DCOPClient::attachInternal. Attach failed Could not open network socket
> QObject::connect: No such slot QtVisionElegant::colourKeyChanged(QColor)
> QObject::connect:  (sender name:   'unnamed')
> QObject::connect:  (receiver name: 'unnamed')
> /dev/video0 [v4l2]: v4l2 support seems to be missing.  Using v4l instead.
> VIDIOCSTUNER: Invalid argument
> VIDIOCSTUNER: Operation not supported
> QWidget::updateFrameStrut(): ERROR - no parent
> QWidget::updateFrameStrut(): ERROR - no parent
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
> ASSERT: "_init" in qvideostream.cpp (390)
>
>
> uke2261> dmesg|egrep -i "vttv|tvaudio|i2c|i810|tuner"
> i2c-core.o: i2c core module
> i2c-algo-bit.o: i2c bit algorithm module
> i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  sda: 1 -- testing...
> i2c-algo-bit.o:1 scl: 1  sda: 0
> i2c-algo-bit.o:2 scl: 1  sda: 1
> i2c-algo-bit.o:3 scl: 0  sda: 1
> i2c-algo-bit.o:4 scl: 1  sda: 1
> i2c-algo-bit.o: bt848 #0 passed test.
> i2c-core.o: adapter bt848 #0 registered as adapter 0.
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: miro: id=7 tuner=6 radio=no stereo=no
> bttv0: using tuner=6
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known
> chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c5
>4 (PV951)
> i2c-core.o: driver generic i2c audio driver registered.
> i2c-core.o: driver i2c TV tuner driver registered.
> tuner: probing bt848 #0 i2c adapter [id=0x10005]
> tuner: chip found @ 0xc0
> tuner: type set to 6 (Temic NTSC (4032 FY5))
> bttv0: i2c attach [client=Temic NTSC (4032 FY5),ok]
> i2c-core.o: client [Temic NTSC (4032 FY5)] registered to adapter [bt848
> #0](pos. 0).
> i810: Intel ICH2 found at IO 0xef00 and 0xe800, MEM 0x0000 and 0x0000, IRQ
> 10
> i810_audio: Audio Controller supports 6 channels.
> i810_audio: Defaulting to base 2 channel mode.
> i810_audio: Resetting connection 0
> i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not
> present), total channels = 2
> tuner: tv freq set to 73.25
> tuner: tv 0x07 0x70 0x8e 0x02
> tuner: tv freq set to 61.25
>
>
> _______________________________________________
> kwintv mailing list
> kwintv at mail.kde.org
> http://mail.kde.org/mailman/listinfo/kwintv

-- 
#----------------------
#Eric Bambach   
#Eric at CISU.net 
#----------------------