[Kwintv] Hauppauge Win-DVBs

Dr. Peter Rafolt kwintv@mail.kde.org
Fri, 18 Oct 2002 01:43:29 +0200 

Please excuse this long mail!

Which driver do you use from www.linuxtv.org?
With the  siemens_dvb-0.9.4.tar.gz-driver it says at the end:

dvb_frontend.c:117: warning: `dvb_frontend_tuner_scan' defined but not used
gcc -D__KERNEL__ -I/usr/src/linux-2.4.19-16mdk/include  -Wall 
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common 
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i586 
-DMODULE -DMODVERSIONS -include 
/usr/src/linux-2.4.19-16mdk/include/linux/modversions.h -I 
../ost/include -I . -D__DVB_PACK__ -g -DUSE_OSD  -nostdinc -I 
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2/include 
-DKBUILD_BASENAME=dvbdev  -DEXPORT_SYMTAB -c dvbdev.c
gcc -D__KERNEL__ -I/usr/src/linux-2.4.19-16mdk/include  -Wall 
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common 
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i586 
-DMODULE -DMODVERSIONS -include 
/usr/src/linux-2.4.19-16mdk/include/linux/modversions.h -I 
../ost/include -I . -D__DVB_PACK__ -g -DUSE_OSD  -nostdinc -I 
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2/include 
-DKBUILD_BASENAME=dvb  -DEXPORT_SYMTAB -c dvb.c
dvb.c:3504: unknown field `busy' specified in initializer
make[2]: *** [dvb.o] Fehler 1
make[2]: Verlassen des Verzeichnisses Verzeichnis 
»/home/peter/multimedia_Quellen/DVB/driver«
make[1]: *** [_mod_/home/peter/multimedia_Quellen/DVB/driver] Fehler 2
make[1]: Verlassen des Verzeichnisses Verzeichnis 
»/usr/src/linux-2.4.19-16mdk«
make: *** [here] Fehler 2


with   dvb-20020927.tar.bz2:
[root]# make

dvb_frontend.c:324:18: warning: #warning finish fe_zigzag for ofdm
dvb_frontend.c:392:18: warning: #warning FIXME optimize fe_tune for ofdm
dvb_frontend.c:414:18: warning: #warning FIXME optimize fe_tune for ofdm
dvb_frontend.c:117: warning: `dvb_frontend_tuner_scan' defined but not used

and later:
usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2/include 
-DKBUILD_BASENAME=stv0299  -c -o stv0299.o stv0299.c
stv0299.c:386:18: warning: #warning FIXME! the value must be scaled properly


but no faults (correct:  "Fehler" in German)


but then
[root]# make insmod


dvbdev.o: unresolved symbol devfs_unregister_R11b271b0
dvbdev.o: unresolved symbol devfs_register_chrdev_R1861652e
dvbdev.o: unresolved symbol devfs_register_R3e33ccec
dvbdev.o: unresolved symbol devfs_mk_dir_R19db9ab8
dvb_net.o: unresolved symbol netif_rx_Rdfbab1ca
dvb_net.o: unresolved symbol alloc_skb_Rd20caa70
dvb_net.o: unresolved symbol skb_over_panic_Rd2996fd3
Using /lib/modules/2.4.19-16mdk/kernel/drivers/i2c/i2c-core.o.gz
insmod: a module named i2c-core already exists
Using /lib/modules/2.4.19-16mdk/kernel/drivers/media/video/videodev.o.gz
insmod: a module named videodev already exists
insmod: a module named dvb_filter already exists
dmxdev.o: unresolved symbol add_wait_queue_Rc36e08a3
dmxdev.o: unresolved symbol __pollwait_R18faee6f
dmxdev.o: unresolved symbol remove_wait_queue_R2d8d6501
insmod: a module named VES1893 already exists
insmod: a module named VES1820 already exists
insmod: a module named L64781 already exists
insmod: a module named SP8870 already exists
insmod: a module named tda8083 already exists
insmod: a module named stv0299 already exists
insmod: a module named tuner already exists
saa7146_core.o: unresolved symbol init_mm_Rd9feedfb
saa7146_core.o: unresolved symbol mem_map_R9d5d7841
saa7146_core.o:
Hint: You are trying to load a module without a GPL compatible license
      and it has unresolved symbols.  Contact the module supplier for
      assistance, only they can help you.

saa7146_v4l.o: unresolved symbol saa7146_del_extension
saa7146_v4l.o: unresolved symbol saa7146_add_extension
saa7146_v4l.o:
Hint: You are trying to load a module without a GPL compatible license
      and it has unresolved symbols.  Contact the module supplier for
      assistance, only they can help you.

insmod: a module named dvb_demux already exists
dvb_frontend.o: unresolved symbol add_wait_queue_Rc36e08a3
dvb_frontend.o: unresolved symbol __pollwait_R18faee6f
dvb_frontend.o: unresolved symbol remove_wait_queue_R2d8d6501
dvb.o: unresolved symbol DmxDevFilterFree
dvb.o: unresolved symbol DmxDevRead
dvb.o: unresolved symbol dvb_frontend_poll
dvb.o: unresolved symbol video_register_device_R98771805
dvb.o: unresolved symbol dvb_net_add_if
dvb.o: unresolved symbol dvb_frontend_get_event
dvb.o: unresolved symbol DmxDevInit
dvb.o: unresolved symbol DmxDevDVRIoctl
dvb.o: unresolved symbol video_unregister_device_Re833baea
dvb.o: unresolved symbol dvb_net_remove_if
dvb.o: unresolved symbol dvb_frontend_stop
dvb.o: unresolved symbol DmxDevPoll
dvb.o: unresolved symbol DmxDevDVROpen
dvb.o: unresolved symbol DmxDevDVRRead
dvb.o: unresolved symbol DmxDevDVRPoll
dvb.o: unresolved symbol dvb_register_device_R3d338534
dvb.o: unresolved symbol saa7146_del_extension
dvb.o: unresolved symbol exit_mm_R2b5fa1e1
dvb.o: unresolved symbol saa7146_get_handle
dvb.o: unresolved symbol add_wait_queue_Rc36e08a3
dvb.o: unresolved symbol DmxDevDVRWrite
dvb.o: unresolved symbol __pollwait_R18faee6f
dvb.o: unresolved symbol DmxDevFilterAlloc
dvb.o: unresolved symbol dvb_frontend_init
dvb.o: unresolved symbol remove_wait_queue_R2d8d6501
dvb.o: unresolved symbol saa7146_add_extension
dvb.o: unresolved symbol dvb_net_release
dvb.o: unresolved symbol DmxDevDVRClose
dvb.o: unresolved symbol dvb_unregister_device_R38a74823
dvb.o: unresolved symbol DmxDevRelease
dvb.o: unresolved symbol DmxDevIoctl
dvb.o: unresolved symbol dvb_frontend_demod_command
dvb.o: unresolved symbol dvb_frontend_exit
dvb.o: unresolved symbol dvb_net_init
dvb.o: unresolved symbol dvb_frontend_tune
make: *** [insmod] Fehler 1


Greetings
Peter






Stefan Preuss schrieb:

>Am Die, 2002-10-15 um 06.01 schrieb George Staikos:
>  
>
>>On Monday October 14 2002 23:35, Dr. Peter Rafolt wrote:
>>    
>>
>>>Dear programmer(s),
>>>is there any chance to see my Hauppauge Win-DVBs PCI with a SAA7146 from
>>>Philips Semiconductors tu run under kwintv (kde 3.0)?
>>>Unluckily I'm just a normal linux-loving user. The only help I could
>>>provide was to translate anything into German...
>>>thank you
>>>      
>>>
>>  This card should already work I think.  Try the code called "qtvision", in 
>>KDE CVS under kdenonbeta/kwintv3/.  Does your card work with other apps in 
>>Linux?  Which ones?
>>
>>    
>>
>For me there is no Problem using this card with KWINTV 0.8.9 and VDR..
>Did you tried it allready ? You need driver from www.linuxtv.org and
>some application to tune your card. My preference is VDR which does much
>more (EPG, recording....) 
>ftp://ftp.cadsoft.de/pub/people/kls/vdr/vdr-1.0.1.tgz 
>
>Greetings 
>Stefan
>
>
>_______________________________________________
>kwintv mailing list
>kwintv@mail.kde.org
>http://mail.kde.org/mailman/listinfo/kwintv
>
>
>  
>