[Konsole-devel] [Bug 150303] Marking/Selecting text jumps to left of next display to the left

[Gary Krueger]

------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
         
http://bugs.kde.org/show_bug.cgi?id=150303         




------- Additional Comments From gkrueger browsermedia com  2007-11-26 16:24 -------
Right, not Xinerama.

It may be that Konsole uses the screen number, instead of the orientation directions ("left of" "right of") to figure out where the display is located.  So, that would need to be corrected in Konsole (or whatever it is that Konsole uses to identify screen configuration -- which could be some issue in X).

Here's xorg.conf:

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "MainViewsonic" 0 0
	Screen      1  "LeftViewsonic" LeftOf "MainViewsonic"
	Screen      2  "RightViewsonic" RightOf "MainViewsonic"
	Screen      3  "PhillipsRight" RightOf "RightViewsonic"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "off"
	Option	    "Clone" "on"
EndSection

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.

	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "MainViewsonic"
	VendorName   "Monitor Vendor"
	ModelName    "P225fb"
	DisplaySize  415	310
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 127.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "RightViewsonic"
	VendorName   "Monitor Vendor"
	ModelName    "G70mb"
	DisplaySize  320	240
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 120.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "LeftViewsonic"
	VendorName   "Monitor Vendor"
	ModelName    "ViewSonic G70fmb"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 70.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Monitor"
        Identifier   "Philips"
        VendorName   "Monitor Vendor"
        ModelName    "Philips 107S(17inch/CM1300)"
        DisplaySize  320        240
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    30.0 - 69.0
        VertRefresh  50.0 - 120.0
        Option      "dpms"
EndSection


Section "Device"
	Identifier  "Videocard0a"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "nVidia Corporation NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:0:0"
	Screen 0
EndSection

Section "Device"
	Identifier  "Videocard0b"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "nVidia Corporation NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:0:0"
	Screen 1
EndSection

Section "Device"
	Identifier  "Videocard1a"
	Driver      "nvidia"
	VendorName  "Videocard Vendor"
	BoardName   "nVidia Corporation NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:4:0"
	Screen 0
EndSection

Section "Device"
	Identifier  "Videocard1b"
	Driver      "nvidia"
	VendorName  "Videocard Vendor"
	BoardName   "nVidia Corporation NV17GL [Quadro4 200/400 NVS]"
	BusID       "PCI:3:4:0"
	Screen 1
EndSection

Section "Screen"
	Identifier "MainViewsonic"
	Device     "Videocard0a"
	Monitor    "MainViewsonic"
	DefaultDepth     16
	Option	"UseEdidFreqs" "True"
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
	Identifier "LeftViewsonic"
	Device     "Videocard0b"
	Monitor    "LeftViewsonic"
	DefaultDepth     16
	Option	"UseEdidFreqs" "True"
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
	Identifier "RightViewsonic"
	Device     "Videocard1a"
	Monitor    "RightViewsonic"
	DefaultDepth     16
	Option	"UseEdidFreqs" "True"
	SubSection "Display"
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
	Identifier "PhillipsRight"
	Device     "Videocard1b"
	Monitor    "Philips"
	DefaultDepth     16
	Option	"UseEdidFreqs" "True"
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1280x1024" "1024x768" "800x600"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection