Problems building Konq/e with Qtopia Core
Piero Pezzin
piero.pezzin at gmail.com
Mon Jan 21 12:45:19 CET 2008
Of course!
Here you are (look for lines 904, 1489, 1520, 1647):
If /bin/sh ../../../../libtool --silent --tag=CXX --mode=compile
arm-linux-g++ -DHAVE_CONFIG_H -I. -I. -I../../../..
-I../../../../konq-embed/kdesrc/kdecore -I../../../../konq-embed/kdesrc/kjs
-I../../../../konq-embed/kdesrc/kssl -I../../../../konq-embed/dropin
-I../../../../konq-embed/kdesrc/kdecore
-I../../../../konq-embed/kdesrc/kdecore/network
-I../../../../konq-embed/kdesrc/kssl
-I../../../../konq-embed/kdesrc/interfaces
-I../../../../konq-embed/dropin/kio -I./../.. -I./../
-I/home/piero/konq-embedded/include -I/home/piero/work/qt-2.3.10/include
-I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia
-DQT_THREAD_SUPPORT -DQWS -D_REENTRANT -DMAX_CACHE_AGE=300 -Wno-long-long
-Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion
-Wchar-subscripts -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline
-Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor
-fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE
-DQT_NO_COMPAT -DQT_NO_ASCII_CAST -MT libkiohttp_la.all_cc.lo -MD -MP -MF
".deps/libkiohttp_la.all_cc.Tpo" -c -o libkiohttp_la.all_cc.lo
libkiohttp_la.all_cc.cc; \
then mv -f ".deps/libkiohttp_la.all_cc.Tpo"
".deps/libkiohttp_la.all_cc.Plo"; else rm -f
".deps/libkiohttp_la.all_cc.Tpo"; exit 1; fi
In file included from libkiohttp_la.all_cc.cc:2:
http.cc: In constructor `HTTPProtocol::HTTPProtocol(const QCString&, const
QCString&, const QCString&)':
http.cc:215: warning: assignment of negative value `-1' to `filesize_t'
http.cc:215: warning: argument of negative value `-1' to `long long unsigned
int'
http.cc: In member function `void HTTPProtocol::resetResponseSettings()':
http.cc:270: warning: assignment of negative value `-1' to `filesize_t'
http.cc:270: warning: argument of negative value `-1' to `long long unsigned
int'
http.cc: In member function `void HTTPProtocol::davParsePropstats(const
QDomNodeList&, KIO::UDSEntry&)':
http.cc:904: error: `namespaceURI' undeclared (first use this function)
http.cc:904: error: (Each undeclared identifier is reported only once for
each
function it appears in.)
http.cc: In member function `void HTTPProtocol::davLock(const KURL&, const
QString&, const QString&, const QString&)':
http.cc:1489: error: `createElementNS' undeclared (first use this function)
http.cc:1520: error: no matching function for call to
`QDomDocument::setContent
(QByteArray&, bool)'
/home/piero/work/qt-2.3.10/include/qdom.h:278: error: candidates are: bool
QDomDocument::setContent(const QCString&)
/home/piero/work/qt-2.3.10/include/qdom.h:279: error: bool
QDomDocument::setContent(const QByteArray&)
/home/piero/work/qt-2.3.10/include/qdom.h:280: error: bool
QDomDocument::setContent(const QString&)
/home/piero/work/qt-2.3.10/include/qdom.h:281: error: bool
QDomDocument::setContent(QIODevice*)
http.cc: In member function `QString HTTPProtocol::davError(int, QString)':
http.cc:1647: error: no matching function for call to
`QDomDocument::setContent
(QByteArray&, bool)'
/home/piero/work/qt-2.3.10/include/qdom.h:278: error: candidates are: bool
QDomDocument::setContent(const QCString&)
/home/piero/work/qt-2.3.10/include/qdom.h:279: error: bool
QDomDocument::setContent(const QByteArray&)
/home/piero/work/qt-2.3.10/include/qdom.h:280: error: bool
QDomDocument::setContent(const QString&)
/home/piero/work/qt-2.3.10/include/qdom.h:281: error: bool
QDomDocument::setContent(QIODevice*)
http.cc: In member function `bool HTTPProtocol::readHeader()':
http.cc:3578: warning: comparison between signed and unsigned integer
expressions
http.cc: In member function `void HTTPProtocol::addEncoding(QString,
QStringList&)':
http.cc:3875: warning: assignment of negative value `-1' to `filesize_t'
http.cc:3875: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc: In member function `int HTTPProtocol::readChunked()':
http.cc:4114: warning: comparison between signed and unsigned integer
expressions
http.cc:4172: warning: assignment of negative value `-1' to `filesize_t'
http.cc:4172: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc: In member function `void HTTPProtocol::slotData(const
QByteArray&)':
http.cc:4228: warning: comparison between signed and unsigned integer
expressions
http.cc:4233: warning: assignment of negative value `-1' to `filesize_t'
http.cc:4233: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc:4249: warning: comparison between signed and unsigned integer
expressions
http.cc: In member function `bool HTTPProtocol::readBody(bool)':
http.cc:4348: warning: comparison between signed and unsigned integer
expressions
http.cc:4368: warning: assignment of negative value `-1' to `filesize_t'
http.cc:4368: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc:4395: warning: comparison between signed and unsigned integer
expressions
http.cc:4398: warning: assignment of negative value `-1' to `filesize_t'
http.cc:4398: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc:4403: warning: assignment of negative value `-1' to `filesize_t'
http.cc:4403: warning: argument of negative value `-1' to `long long
unsigned
int'
http.cc:4469: warning: comparison between signed and unsigned integer
expressions
I hope it helps.
Thanks in advance.
2008/1/21 Max Andruschenko <maximus at softerra.com>:
> Could you send me log messages about an error?
>
> ----- Original Message -----
> *From:* Piero Pezzin <piero.pezzin at gmail.com>
> *To:* For discussion of Konqueror/Embedded <konq-e at kde.org>
> *Sent:* Monday, January 21, 2008 1:01 PM
> *Subject:* Re: Problems building Konq/e with Qtopia Core
>
> Hello Max, thank you very much for your help.
> It worked!
>
> ...but now I have problems with the class http.cc.
>
> First of all, the line
>
> #include <qdom.h>
>
> was commented and there were problems with finding QDomElement and
> QDomDocument classes. So I uncommented that line, but now the problem is
> that we have calls to the function setContent with a bool parameter passed
> (line 746)
>
> multiResponse.setContent( m_bufWebDavData, true );
>
> but qdom.h defines
>
> bool setContent( const QByteArray& text );
>
> Another problem is that at line 902 there is a call to
> QDomElement::namespaceURI(), which is not defined in qdom.h.
>
> I recall that I'm using qt-2.3.10. Am I missing something?
>
> Thanks in advance and kind regards.
>
>
> 2008/1/21 Max Andruschenko < maximus at softerra.com>:
>
> > Hello friend!
> >
> > The solution for your problem is:
> >
> > open kextsock.h
> > comment the lines
> > #ifdef Q_OS_UNIX
> > and it's #endif
> >
> > That's all.
> >
> > Have a nice day!
> >
> > ----- Original Message -----
> > *From:* Piero Pezzin <piero.pezzin at gmail.com>
> > *To:* For discussion of Konqueror/Embedded <konq-e at kde.org>
> > *Sent:* Friday, January 18, 2008 7:18 PM
> > *Subject:* Re: Problems building Konq/e with Qtopia Core
> >
> > Hello everyone.
> > After unnumbered attempts, I got some results: configure works fine and
> > make starts correctly. But it blocks at a certain point, complaining about
> > the file ftp.h, as you can see from the messages below:
> >
> > If /bin/sh ../../../libtool --silent --tag=CXX --mode=compile
> > arm-linux-g++
> > -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../konq-embed/kdesrc/kdecore
> > -I../../../konq-embed/kdesrc/kjs -I../../../konq-embed/kdesrc/kssl
> > -I../../../konq-embed/dropin -I../../../konq-embed/dropin/kio
> > -I../../../konq-embed/dropin/kssl -I../../../konq-embed/kdesrc
> > -I../../../konq-embed/kdesrc/kdecore
> > -I../../../konq-embed/kdesrc/kdecore/network
> > -I../../../konq-embed/kdesrc/kssl
> > -I../../../konq-embed/kdesrc/kssl -I/home/piero/konq-embedded/include
> > -I/home/piero/work/qt-2.3.10/include
> > -I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia
> > -DQT_THREAD_SUPPORT -DQWS -D_REENTRANT -Wno-long-long -Wundef -ansi
> > -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion
> > -Wchar-subscripts
> > -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline -Wformat-security
> > -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions
> > -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT
> > -DQT_NO_ASCII_CAST -MT ftp.lo -MD -MP -MF ".deps/ftp.Tpo" -c -o ftp.lo
> > ftp.cc; \
> > then mv -f ".deps/ftp.Tpo" ".deps/ftp.Plo"; else rm -f ".deps/ftp.Tpo";
> > exit
> > 1; fi
> > In file included from ftp.cc:26:
> > ftp.h:141: error: parse error before `{' token
> > ftp.h:154: error: ISO C++ forbids declaration of `m_server' with no type
> > ftp.h:155: error: parse error before `}' token
> > ftp.h:157: error: destructors must be member functions
> > ftp.h: In function `void FtpSocket()':
> > ftp.h:157: error: `closeSocket' undeclared (first use this function)
> > ftp.h:157: error: (Each undeclared identifier is reported only once for
> > each
> > function it appears in.)
> > ftp.h: At global scope:
> > ftp.h:162: error: `void closeSocket()' used prior to declaration
> > ftp.h:169: error: non-member function `int server()' cannot have `const'
> > method
> > qualifier
> > ftp.h:179: error: non-member function `int sock()' cannot have `const'
> > method
> > qualifier
> > ftp.h: In function `int sock()':
> > ftp.h:179: error: `fd' undeclared (first use this function)
> > ftp.h: At global scope:
> > ftp.h:184: error: non-member function `void debugMessage(const char*)'
> > cannot
> > have `const' method qualifier
> > ftp.h:189: error: non-member function `int errorMessage(int, const
> > char*)'
> > cannot have `const' method qualifier
> > ftp.h:199: error: non-member function `bool setSocketOption(int, char*,
> > unsigned int)' cannot have `const' method qualifier
> > ftp.h: In function `int textRead()':
> > ftp.h:222: error: invalid use of `this' in non-member function
> > ftp.h: At global scope:
> > ftp.h:225: error: parse error before `private'
> > ftp.h:227: error: redefinition of `int m_server'
> > ftp.h:154: error: `int m_server' previously defined here
> > ftp.h:228: error: parse error before `}' token
> > ftp.h:590: error: syntax error before `*' token
> > ftp.h:595: error: syntax error before `*' token
> > ftp.cc:170: error: `pSock' was not declared in this scope
> > ftp.cc:171: error: `int FtpTextReader::textRead' is not a static member
> > of `
> > class FtpTextReader'
> >
> > To me the file seems correct, but I can be wrong. I'm using
> > kdenox_snapshot_qt2_20070531, with qt-embedded 2.3.10 and qtopia 2.2.0.
> >
> > Any clue?
> >
> > Thanks in advance and kind regards.
> >
> >
> > On Jan 15, 2008 2:48 PM, Piero Pezzin <piero.pezzin at gmail.com > wrote:
> >
> > > Ok, thanks. If I'll fail with the building of Konq/e, I will wait for
> > > the next version of Qtopia.
> > >
> > >
> > > On Jan 15, 2008 2:12 PM, Luciano Montanaro <mikelima at cirulla.net >
> > > wrote:
> > >
> > > > Il Tuesday 15 January 2008 14:00:08 Piero Pezzin ha scritto:
> > > > > Thank you very much.
> > > > > So I can forget about qt and concentrate on qt/embedded and
> > > > qtopia. That's
> > > > > what I wanted to hear. There is a lot of confusion about this
> > > > topic..
> > > > >
> > > > > Ok, I'm going to try. I suppose it won't be a pleasant work...
> > > >
> > > > Well, not exactly. Qt3 (at least Qt3.3) *used* to work correctly. I
> > > > think
> > > > there are a few issues with Qt3 and current SVN, but those should be
> > > > easy
> > > > enough to fix. What is not going to work is using Qtopia (Or Qt 4,
> > > > for that
> > > > matter). But Qt4.4 should ship with Webkit, so if you can wait (it
> > > > is
> > > > expected in Q1 2008, so within a few months now) that could provide
> > > > you with
> > > > a good browser component to start off.
> > > >
> > > > Luciano
> > > >
> > > > >
> > > > > 2008/1/15 Max Andruschenko <maximus at softerra.com>:
> > > > > > Hi dear friend.
> > > > > >
> > > > > > I can say you a definitly wrong.
> > > > > > You can compile Konqueror embedded only for qtopia version 2.2.0or
> > > > > > 2.2.2. So, first you should to do is to get qt embedded version
> > > > 2.3.10 or
> > > > > > 2.3.12. Compile it with your cross compiler, at the end you
> > > > should get
> > > > > > qte-mt multithread library. And you should compile it with rtti
> > > > support,
> > > > > > by default it compiles without rtti.
> > > > > > Then compile qtopia version 2.2.0 with library qte-mt. If during
> > > > the
> > > > > > building you get qte library, remove it from the folder. Also
> > > > you should
> > > > > > compile qtopia with rtti support.
> > > > > > Then compile konqueror.
> > > > > >
> > > > > > Good luck!
> > > >
> > > >
> > > > _______________________________________________
> > > > konq-e mailing list
> > > > konq-e at kde.org
> > > > https://mail.kde.org/mailman/listinfo/konq-e
> > > >
> > >
> > >
> > ------------------------------
> >
> > _______________________________________________
> > konq-e mailing list
> > konq-e at kde.org
> > https://mail.kde.org/mailman/listinfo/konq-e
> >
> >
> > _______________________________________________
> > konq-e mailing list
> > konq-e at kde.org
> > https://mail.kde.org/mailman/listinfo/konq-e
> >
> >
> ------------------------------
>
> _______________________________________________
> konq-e mailing list
> konq-e at kde.org
> https://mail.kde.org/mailman/listinfo/konq-e
>
>
> _______________________________________________
> konq-e mailing list
> konq-e at kde.org
> https://mail.kde.org/mailman/listinfo/konq-e
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.kde.org/pipermail/konq-e/attachments/20080121/55903d70/attachment-0001.html
More information about the konq-e
mailing list