Problems building Konq/e with Qtopia Core

[Max Andruschenko]

Hello friend!

The solution for your problem is:

open kextsock.h
comment the lines
#ifdef Q_OS_UNIX
and it's #endif

That's all.

Have a nice day!
  ----- Original Message ----- 
  From: Piero Pezzin 
  To: For discussion of Konqueror/Embedded 
  Sent: Friday, January 18, 2008 7:18 PM
  Subject: Re: Problems building Konq/e with Qtopia Core


  Hello everyone.
  After unnumbered attempts, I got some results: configure works fine and make starts correctly. But it blocks at a certain point, complaining about the file ftp.h, as you can see from the messages below:

  If /bin/sh ../../../libtool --silent --tag=CXX --mode=compile arm-linux-g++
  -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../konq-embed/kdesrc/kdecore
  -I../../../konq-embed/kdesrc/kjs -I../../../konq-embed/kdesrc/kssl 
  -I../../../konq-embed/dropin -I../../../konq-embed/dropin/kio
  -I../../../konq-embed/dropin/kssl -I../../../konq-embed/kdesrc
  -I../../../konq-embed/kdesrc/kdecore
  -I../../../konq-embed/kdesrc/kdecore/network -I../../../konq-embed/kdesrc/kssl 
  -I../../../konq-embed/kdesrc/kssl   -I/home/piero/konq-embedded/include
  -I/home/piero/work/qt-2.3.10/include
  -I/home/piero/work/qtopia-free-2.2.0/qtopia/include/qtopia
  -DQT_THREAD_SUPPORT -DQWS -D_REENTRANT  -Wno-long-long -Wundef -ansi 
  -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts
  -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline -Wformat-security
  -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions 
  -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT
  -DQT_NO_ASCII_CAST  -MT ftp.lo -MD -MP -MF ".deps/ftp.Tpo" -c -o ftp.lo
  ftp.cc; \
  then mv -f ".deps/ftp.Tpo" ".deps/ftp.Plo"; else rm -f ".deps/ftp.Tpo"; exit 
  1; fi
  In file included from ftp.cc:26:
  ftp.h:141: error: parse error before `{' token
  ftp.h:154: error: ISO C++ forbids declaration of `m_server' with no type
  ftp.h:155: error: parse error before `}' token 
  ftp.h:157: error: destructors must be member functions
  ftp.h: In function `void FtpSocket()':
  ftp.h:157: error: `closeSocket' undeclared (first use this function)
  ftp.h:157: error: (Each undeclared identifier is reported only once for each 
     function it appears in.)
  ftp.h: At global scope:
  ftp.h:162: error: `void closeSocket()' used prior to declaration
  ftp.h:169: error: non-member function `int server()' cannot have `const'
  method 
     qualifier
  ftp.h:179: error: non-member function `int sock()' cannot have `const' method
     qualifier
  ftp.h: In function `int sock()':
  ftp.h:179: error: `fd' undeclared (first use this function) 
  ftp.h: At global scope:
  ftp.h:184: error: non-member function `void debugMessage(const char*)' cannot
     have `const' method qualifier
  ftp.h:189: error: non-member function `int errorMessage(int, const char*)' 
     cannot have `const' method qualifier
  ftp.h:199: error: non-member function `bool setSocketOption(int, char*,
     unsigned int)' cannot have `const' method qualifier
  ftp.h: In function `int textRead()': 
  ftp.h:222: error: invalid use of `this' in non-member function
  ftp.h: At global scope:
  ftp.h:225: error: parse error before `private'
  ftp.h:227: error: redefinition of `int m_server'
  ftp.h:154: error: `int m_server' previously defined here 
  ftp.h:228: error: parse error before `}' token
  ftp.h:590: error: syntax error before `*' token
  ftp.h:595: error: syntax error before `*' token
  ftp.cc:170: error: `pSock' was not declared in this scope 
  ftp.cc:171: error: `int FtpTextReader::textRead' is not a static member of `
     class FtpTextReader'

  To me the file seems correct, but I can be wrong. I'm using kdenox_snapshot_qt2_20070531, with qt-embedded 2.3.10 and qtopia 2.2.0.

  Any clue?

  Thanks in advance and kind regards.



  On Jan 15, 2008 2:48 PM, Piero Pezzin <piero.pezzin at gmail.com > wrote:

    Ok, thanks. If I'll fail with the building of Konq/e, I will wait for the next version of Qtopia. 



    On Jan 15, 2008 2:12 PM, Luciano Montanaro <mikelima at cirulla.net > wrote:

      Il Tuesday 15 January 2008 14:00:08 Piero Pezzin ha scritto:

      > Thank you very much.
      > So I can forget about qt and concentrate on qt/embedded and qtopia. That's
      > what I wanted to hear. There is a lot of confusion about this topic..
      >
      > Ok, I'm going to try. I suppose it won't be a pleasant work... 


      Well, not exactly. Qt3 (at least Qt3.3) *used* to work correctly. I think
      there are a few issues with Qt3 and current SVN, but those should be easy
      enough to fix. What is not going to work is using Qtopia (Or Qt 4, for that 
      matter). But Qt4.4 should ship with Webkit, so if you can wait (it is
      expected in Q1 2008, so within a few months now) that could provide you with
      a good browser component to start off.

      Luciano


      >
      > 2008/1/15 Max Andruschenko <maximus at softerra.com>:
      > >  Hi dear friend.
      > >
      > > I can say you a definitly wrong. 
      > > You can compile Konqueror embedded only for qtopia version 2.2.0 or
      > > 2.2.2. So, first you should to do is to get qt embedded version 2.3.10 or
      > > 2.3.12. Compile it with your cross compiler, at the end you should get 
      > > qte-mt multithread library. And you should compile it with rtti support,
      > > by default it compiles without rtti.
      > > Then compile qtopia version 2.2.0 with library qte-mt. If during the
      > > building you get qte library, remove it from the folder. Also you should
      > > compile qtopia with rtti support.
      > > Then compile konqueror.
      > >
      > > Good luck!


      _______________________________________________ 
      konq-e mailing list
      konq-e at kde.org
      https://mail.kde.org/mailman/listinfo/konq-e







------------------------------------------------------------------------------


  _______________________________________________
  konq-e mailing list
  konq-e at kde.org
  https://mail.kde.org/mailman/listinfo/konq-e
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mail.kde.org/pipermail/konq-e/attachments/20080121/80b0196c/attachment.html