Trouble compiling KMM 5.0 and Master Branch on new Fedora 29 system
Jack
ostroffjh at users.sourceforge.net
Sat Nov 10 22:44:27 GMT 2018
On 2018.11.10 13:35, Brendan Coupe wrote:
> I downloaded the source for 5.0.2 and compiled it without any
> problems. I
> tried the 5.0 and master branches again and they failed on iCal again.
> Seems that there is something off with the source on git???
I doubt there is actually anything "wrong." I suspect some bad
interaction caused by F29 using a newer version of some tool. Again -
right after you get the failure, have you checked the files and
directory I suggested? I'll also try compiling from git head with gcc
8.
>
> ----
> Brendan Coupe
>
>
> On Thu, Nov 8, 2018 at 11:44 AM Jack <ostroffjh at users.sourceforge.net>
> wrote:
>
> > I am able to run cmake (3.11.4) with gcc 8.2.0, with either make or
> > ninja, with no errors. In your build directory, is there anything
> > useful in CMakeFiles/CMakeOutput.log or CMakeError.log? Also look
> in
> > CMakeTmp/
> >
> > Another possible approach: cmake --all-other-parameters
> > --trace-source=/path/to/source/cmake/modules/FindLinical.cmake
> > --debug-trycompile /path/to/source
> > Then see if anything useful shows up in the above places.
> >
> > On 2018.11.07 20:29, Brendan Coupe wrote:
> > > Fedora got 5.0.1 to compile so there must be some hope:-)
> > >
> > > I added the --debug-output option to cmake. The output from just
> after
> > > the weboob errors are copied below:
> > >
> > >
> >
> ===========================================================================
> > >
> > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> (try_run):
> > > Policy CMP0066 is not set: Honor per-config flags in
> try_compile()
> > > source-file signature. Run "cmake --help-policy CMP0066" for
> policy
> > > details. Use the cmake_policy command to set the policy and
> > > suppress this
> > > warning.
> > >
> > > For compatibility with older versions of CMake, try_compile is
> not
> > > honoring
> > > caller config-specific compiler flags (e.g.
> CMAKE_C_FLAGS_DEBUG)
> > > in the
> > > test project.
> > > Call Stack (most recent call first):
> > > CMakeLists.txt:242 (find_package)
> > > This warning is for project developers. Use -Wno-dev to suppress
> it.
> > >
> > > Called from: [2]
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> (try_run):
> > > Policy CMP0056 is not set: Honor link flags in try_compile()
> > > source-file
> > > signature. Run "cmake --help-policy CMP0056" for policy
> details.
> > > Use the
> > > cmake_policy command to set the policy and suppress this
> warning.
> > >
> > > For compatibility with older versions of CMake, try_compile is
> not
> > > honoring
> > > caller link flags (e.g. CMAKE_EXE_LINKER_FLAGS) in the test
> > > project.
> > > Call Stack (most recent call first):
> > > CMakeLists.txt:242 (find_package)
> > > This warning is for project developers. Use -Wno-dev to suppress
> it.
> > >
> > > Called from: [2]
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > CMake Warning (dev) at cmake/modules/FindLibical.cmake:59
> (try_run):
> > > Policy CMP0067 is not set: Honor language standard in
> try_compile()
> > > source-file signature. Run "cmake --help-policy CMP0067" for
> policy
> > > details. Use the cmake_policy command to set the policy and
> > > suppress this
> > > warning.
> > >
> > > For compatibility with older versions of CMake, try_compile is
> not
> > > honoring
> > > language standard variables in the test project:
> > >
> > > CMAKE_CXX_STANDARD
> > > CMAKE_CXX_STANDARD_REQUIRED
> > > CMAKE_CXX_EXTENSIONS
> > >
> > > Call Stack (most recent call first):
> > > CMakeLists.txt:242 (find_package)
> > > This warning is for project developers. Use -Wno-dev to suppress
> it.
> > >
> > > Called from: [2]
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > CMake Error at cmake/modules/FindLibical.cmake:75 (message):
> > > Unable to compile or run the libical version detection program.
> > > Call Stack (most recent call first):
> > > CMakeLists.txt:242 (find_package)
> > >
> > >
> > > Called from: [2]
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindLibical.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > -- Configuring incomplete, errors occurred!
> > > See also
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeOutput.log".
> > > See also
> > >
> >
> "/usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/build/CMakeFiles/CMakeError.log".
> > > make: *** No targets specified and no makefile found. Stop.
> > >
> > > =============================================================
> > >
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > -- Found PythonLibs: //lib64/libpython2.7.so (found suitable
> version
> > > "2.7.15", minimum required is "2.7.15")
> > > Called from: [4]
> /usr/share/cmake/Modules/FindPackageMessage.cmake
> > > [3]
> > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > [2] /usr/share/cmake/Modules/FindPythonLibs.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > Called from: [4]
> > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > [3]
> > > /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake
> > > [2]
> > >
> >
> /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/cmake/modules/FindPythonModule.cmake
> > > [1]
> > > /usr/local/src/kmm/kmymoney-5.0-2018.11.07-18:23:12/CMakeLists.txt
> > > -- Configuring incomplete, errors occurred!
> > >
> > >
> > > ----
> > > Brendan Coupe
> > > On Wed, Nov 7, 2018 at 5:42 PM Jack
> <ostroffjh at users.sourceforge.net>
> > > wrote:
> > > >
> > > > On 2018.11.07 19:22, Brendan Coupe wrote:
> > > > > weboob errors seem to be unfixable in Fedora. I think they
> have
> > > been
> > > > > around for a while, I found them in previous requests for
> help. I
> > > > > don' think they have anything to do with the compile failing.
> not
> > > > > sure if they cause any of the weird behavior I was seeing. I
> will
> > > try
> > > > > to resurrect an old F28 system. I'm hoping the repos have
> 5.0.2
> > > soon
> > > > > since I'm currently running 5.0.1 and dealing with old
> problems
> > > that
> > > > > have been fixed.
> > > > I agree weboob is not relevant here.
> > > > >
> > > > > Is this the detection program you are talking about:
> > > > > cmake/modules/FindLibical.cmake
> > > > No, the .cmake program tells cmake where to look for stuff, and
> how
> > > to
> > > > set various variables used later in the cmake run. To actually
> > > check,
> > > > cmake creates a .c program (using hints and info from the .cmake
> > > file,
> > > > and then tries to compile and link it. (Some checks might be
> done
> > > with
> > > > pkg_config) Normally that fails if libical isn't found, or
> isn't a
> > > > high enough version, for example. Your error says " Unable to
> > > compile
> > > > or run the libical version detection program." which seems like
> a
> > > > different sort of problem. I would look through the cmake
> --help
> > > > output to see what parameters might provide additional details
> about
> > > > what is actually failing.
> > > > >
> > > > > Line 75 is the source of the message.
> > > > > gcc.x86_64 8.2.1-4.fc29
> > > > > @updates
> > > > > gcc-c++.x86_64 8.2.1-4.fc29
> > > > > @updates
> > > > > gcc-gdb-plugin.x86_64 8.2.1-4.fc29
> > > > > @updates
> > > > > libgcc.x86_64 8.2.1-4.fc29
> > > > > @updates
> > > > This, however, might be the issue. I'll have to try installing
> gcc
> > > 8
> > > > and see how it works for me. As a temporary fix, you might try
> > > using
> > > > gcc 7.
> > > >
> > > > Jack
> > > > >
> > > > > ----
> > > > > Brendan Coupe
> > > > > On Wed, Nov 7, 2018 at 4:47 PM Jack
> > > <ostroffjh at users.sourceforge.net>
> > > > > wrote:
> > > > > >
> > > > > > Hello Brendan,
> > > > > >
> > > > > > On 2018.11.07 18:17, Brendan Coupe wrote:
> > > > > > > I have been compiling from source for 10+ years. I had
> been
> > > able
> > > > > to
> > > > > > > compile both the master branch and the 5.0 branch on my
> > > Fedora 28
> > > > > > > system until a month or so ago. I was having some weird
> > > behavior
> > > > > in
> > > > > > > KMM5 that was not affecting a clean Fedora 28 test VM
> running
> > > KMM
> > > > > > > from the repos so I decided to build a new clean Fedora 29
> > > system.
> > > > > > It may be worth checking the release notes for Fedora 29 to
> see
> > > what
> > > > > > changed, and if anything looks possibly relevant.
> > > > > >
> > > > > > > I also upgraded the old system from Fedora 28 to 29. Both
> > > systems
> > > > > > > fail at the same point while compiling from the master
> and 5.0
> > > > > > > branches:
> > > > > > It certainly sounds like some difference between 28 and 29
> is
> > > behind
> > > > > > the failure.
> > > > > >
> > > > > > > -- Found LibOfx:
> > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID
> > > > > > > -- Performing Test LIBOFX_HAVE_CLIENTUID - Success
> > > > > > > -- Found PythonInterp: /usr/bin/python2 (found suitable
> > > version
> > > > > > > "2.7.15", minimum required is "2.6")
> > > > > > > -- Found PythonLibs: /usr/lib64/libpython2.7.so (found
> > > suitable
> > > > > > > version "2.7.15", minimum required is "2.7.15")
> > > > > > > -- Could NOT find PY_weboob (missing: PY_WEBOOB)
> > > > > > I'm assuming this is not an issue for you.
> > > > > > > CMake Error at cmake/modules/FindLibical.cmake:75
> (message):
> > > > > > > Unable to compile or run the libical version detection
> > > program.
> > > > > > This does seem odd. It appears not even getting to the
> point of
> > > > > > actually checking for an installed libical.
> > > > > > > Call Stack (most recent call first):
> > > > > > > CMakeLists.txt:242 (find_package)
> > > > > > At the point of failure, check in the build directory.
> Often
> > > you
> > > > > can
> > > > > > find the libical version detection program (I've forgotten
> > > whether
> > > > > it
> > > > > > leaves the .c program around, and see if configure.log (or
> > > something
> > > > > > like it) might have a more detailed reason for the failure
> to
> > > > > compile
> > > > > > that .c program.
> > > > > >
> > > > > > Not sure if it might be relevant, but what version of gcc
> are
> > > you
> > > > > > using, both in F28 and in F29?
> > > > > > >
> > > > > > > -- Configuring incomplete, errors occurred!
> > > > > > > ========================================
> > > > > > >
> > > > > > > libical appears to be installed:
> > > > > > >
> > > > > > >
> > > > > > > dnf list installed | grep libical
> > > > > > > libical.x86_64
> > > > > 3.0.3-7.fc29
> > > > > > > @fedora
> > > > > > > libical-devel.x86_64
> > > > > 3.0.3-7.fc29
> > > > > > > @fedora
> > > > > > >
> > > > > > > Any ideas?
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > ----
> > > > > > > Brendan Coupe
> > > > > > Jack
More information about the KMyMoney-devel
mailing list