From phillor at telstra.com  Sat Sep  1 01:19:10 2007
From: phillor at telstra.com (Phil)
Date: Sat, 1 Sep 2007 10:19:10 +1000
Subject: Basic documemtation question
References: <001d01c7eb7a$5dec4050$f07df50a@MOTORHOME>
	<200708311036.11522.amilcar@ida.ing.tu-bs.de>
Message-ID: <006101c7ec37$74918a00$c35ca30a@MOTORHOME>

----- Original Message ----- 
From: "Amilcar do Carmo Lucas" <amilcar at ida.ing.tu-bs.de>
To: <kdevelop at kdevelop.org>
Sent: Friday, August 31, 2007 6:36 PM
Subject: Re: Basic documemtation question


> On Friday 31 August 2007 04:51:18 Phil wrote:
>> Thank you for reading this.
>>
>> Due to a recent system upgrade I've lost my original documentation
>> settings. I'm attempting to read documents that I had previously 
>> downloaded
>> rather than read on-line documents.
>>
>> For example, the following are the first four lines from
>> "/usr/share/apps/kdevdocumentation/tocs/stl.toc".
>>
>> <!DOCTYPE kdeveloptoc>
>> <kdeveloptoc>
>> <title>STL (sgi.com)</title>
>> <base href="http://www.sgi.com/tech/stl"/>
>>
>> I've edited the base href line as follows (and this one of many ideas 
>> that
>> I've tried):
>>
>> <base href="/home/phil/stl.doc"/>
>
> Try <base href="/home/phil/stl"/> instead
>

Thank you for the quick reply.

Unfortunately, due to a typographical error, stl.doc should have been 
stl_doc, which is the directory where the STL documents are stored.

I had already tried stl_doc/index.html which didn't work either.

If I find the answer I'll definitely make a note of it this time.

Regards,
Phil.




From j-almeida at criticalsoftware.com  Thu Sep 27 18:23:03 2007
From: j-almeida at criticalsoftware.com (Jorge Almeida)
Date: Thu, 27 Sep 2007 18:23:03 +0100
Subject: Problem with Kdevelop HEAD (Error lines navigation)
Message-ID: <200709271823.03242.j-almeida@criticalsoftware.com>


Hello to all.

I'm using kdevelop HEAD (Last week snapshot), with a Custom Makefile project.

When i compile the project and some errors appear, i click on they and nothing 
happens, kdevelop does not take to the liner where the error occurs. 
This was working before.
I've tried using the three output modes and the behaviour is the same.

Any clues??!!

Thanks for any answer.

Greetings.

-- 
Jorge Almeida
j-almeida at criticalsoftware.com



From apaku at gmx.de  Thu Sep 27 19:47:53 2007
From: apaku at gmx.de (Andreas Pakulat)
Date: Thu, 27 Sep 2007 20:47:53 +0200
Subject: Problem with Kdevelop HEAD (Error lines navigation)
In-Reply-To: <200709271823.03242.j-almeida@criticalsoftware.com>
References: <200709271823.03242.j-almeida@criticalsoftware.com>
Message-ID: <20070927184753.GA6067@morpheus.apaku.dnsalias.org>

On 27.09.07 18:23:03, Jorge Almeida wrote:
> 
> Hello to all.
> 
> I'm using kdevelop HEAD (Last week snapshot), with a Custom Makefile project.
> 
> When i compile the project and some errors appear, i click on they and nothing 
> happens, kdevelop does not take to the liner where the error occurs. 
> This was working before.
> I've tried using the three output modes and the behaviour is the same.
> 
> Any clues??!!

Works for me. But that stuff is possible to break when it can't find out
which file it should open, or "guesses" a wrong path from the error
message and the resulting file doesn't exist.

Can you provide a small example project that exhibits the problem? That
way we (developers) can try to reproduce and see if its a bug in the
code that can be fixed...

Andreas

-- 
You've been leading a dog's life.  Stay off the furniture.