Severe attenuation of preview audio (but rendered audio is okay)
Mark Emerson
algebravictory at gmail.com
Tue Apr 25 20:40:50 BST 2023
Solved!!!
>You might also have per-application volume controls,
That was it.
THANK YOU, Evert!!!
Mark
On 4/25/23 14:11, Evert Vorster wrote:
> Just maybe you have Kdenlive's playback volume turned down?
> Under the monitor there are buttons, one is three horizontal stripes.
> Click on that, and you will get the volume control:
> image.png
>
>
> You might also have per-application volume controls, click on the
> speaker icon and make sure the volume control for Kdenlive is up all
> the way.
>
> Sometimes it's the simple stuff, so start there?
>
> Kind regards,
> Evert Vorster
>
> Awesome Chapters Tours
> http://www.awesomechapters.com
> Tel: +264 (0) 811477690
>
>
>
> On Tue, 25 Apr 2023 at 20:49, Mark Emerson
> <Subscriptions.4 at markemerson.org> wrote:
>
> Eugen,
>
> Thank you very much, but this did not solve the problem.
>
> When I execute 23.04.0, I get a message, "Unable to create KIO
> worker. Can not find a KIO worker for protocol 'tags'."
>
> I clicked OK and it continued into the editor. There, I brought in
> an audio file, mp3, and played it. It was inaudible until I
> cranked up the OS volume to full, and even then it was rather
> soft. Unlike before, I was unable to find any Preview volume
> control, which disappeared from the Playback menu in settings. Why
> no playback volume control?
>
> Mark
>
> On 4/25/23 11:31, Eugen Mohr wrote:
>>
>> Hi Mark
>>
>> You have downloaded Kdenlive from your distributor. This package
>> is not under control of the Kdenlive team. Please download the
>> 23.04.0 AppImage from the download page and try again:
>> https://kdenlive.org/en/download/
>>
>> BR
>>
>> Eugen
>>
>>
>> Am 25.04.2023 um 11:53 schrieb Mark Emerson:
>>> I'm experienced with kdenlive, using it off and on for various
>>> projects over the past decade, always on Linux/Debian. Last time
>>> I used it was May 2022. I had not upgraded my Linux for several
>>> years until July 2022.
>>>
>>> Today is my first use of kdenlive after the Linux upgrade, which
>>> I see (per the About box) was upgraded to 20.12.3. I also
>>> checked my kdenlive from the Linux command line, and I got a
>>> message that I have the newest version, 20.12.3-1. However, the
>>> kdenlive website lists later versions, up to 23.04.0
>>> (2023-04-20)... dunno why my system says I have the newest. I
>>> tried to re-install but it refused saying I have the newest.
>>>
>>> In any event, I recorded a video today with a camera file (MTS)
>>> that has a low quality audio track. On a separate audio device,
>>> I recorded an audio file (WAV) from a good lapel microphone.
>>> Both files play normally with VLC.
>>>
>>> When I bring these files into kdenlive, and drag them into
>>> track(s) and then play, the video displays properly in the
>>> monitor. However, the audio is BARELY AUDIBLE in both files,
>>> even when I maximize my OS volume. If I go to
>>> Settings/Configure-Kdenlive/Playback and set the Preview volume
>>> to its max (200%), I can hear a little better and without
>>> distortion. (If I display the Audio Mixer, and maximize the
>>> channel and master, it distorts horribly, so I'm not doing that.)
>>>
>>> When I render a little zone and play it (forgetting to turn down
>>> my OS volume), it blares loudly and without distortion. So, the
>>> rendered result is okay.
>>>
>>> It appears that something is severely attenuating the
>>> preview/monitor volume. Please advise. Thank you.
>>>
>>> Mark
>>>
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/kdenlive/attachments/20230425/4725227c/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 22729 bytes
Desc: not available
URL: <http://mail.kde.org/pipermail/kdenlive/attachments/20230425/4725227c/attachment-0001.png>
More information about the kdenlive
mailing list