Cannot configure processor speed in KDE 4.6

[Dotan Cohen]

The problem is not the fact that this KDE profile was used once on a
laptop. I replaced these files, no change:
powerdevil2profilesrc
powerdevil.notifyrc
powerdevilprofilesrc
powerdevilrc
...and the problem persists. Furthermore, the profile has been used on
this system for over a month without issues, only today did the system
become sluggish and cause me to check. There is plenty of memory, and
the CPUs are cool:

✈ganymede:~$ free -m
            total       used       free     shared    buffers     cached
Mem:          3771       2133       1638          0         96       1360
-/+ buffers/cache:        675       3095
Swap:         2998          0       2998
✈ganymede:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:     +1.14 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:     +3.25 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:       +4.97 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:     +11.98 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:    2428 RPM  (min =  600 RPM)
CHASSIS FAN Speed:   0 RPM  (min = 1200 RPM)
CPU Temperature:   +34.0°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:    +37.0°C  (high = +45.0°C, crit = +95.0°C)

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:  +35.0°C
Core0 Temp:  +34.0°C
Core1 Temp:  +30.0°C
Core1 Temp:  +31.0°C

✈ganymede:~$

-- 
Dotan Cohen

http://gibberish.co.il
http://what-is-what.com
___________________________________________________
This message is from the kde mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.