[Bug 192173] New: freezes on boot unless i press left arrow key (laptop)
badger
wivenhoe11 at hotmail.com
Sat May 9 20:30:30 UTC 2009
https://bugs.kde.org/show_bug.cgi?id=192173
Summary: freezes on boot unless i press left arrow key (laptop)
Product: www.kde.org
Version: unspecified
Platform: Ubuntu Packages
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: NOR
Component: general
AssignedTo: kde-www at kde.org
ReportedBy: wivenhoe11 at hotmail.com
Version: kubuntu 9/04 (using KDE 4.2.2)
OS: Linux
Installed from: Ubuntu Packages
hi,
i have installed kubuntu on my laptop (not dual boot or wubi) and everytime i
get to past the starting system message i have to hold down the left arrow key
to continue to the boot process. I stops being needed once i get to the two
swirling balls. this also needs to be done on shut down as well. here is my
dmesg thingy (sorry not a technical person) so see if anyone can help.
badger at q:~$ dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009e000/0009e000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd at palmer) (gcc version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
(Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
[ 0.000000] BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3bf50 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000091000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003bf50000 (usable)
[ 0.000000] modified: 000000003bf50000 - 000000003bf65000 (ACPI data)
[ 0.000000] modified: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[ 0.000000] modified: 000000003bf66000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bd000 - 37fef94d
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb394d
[ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fef94c to
00881000 - 00fb394c
[ 0.000000] ACPI: RSDP 000F83C0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3BF5CD6B, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP
0)
[ 0.000000] ACPI: FACP 3BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_
F4240)
[ 0.000000] ACPI: DSDT 3BF5CDD7, 7B6F (r1 NVIDIA MCP67 6040000 MSFT
3000000)
[ 0.000000] ACPI: FACS 3BF65FC0, 0040
[ 0.000000] ACPI: TCPA 3BF64AAE, 0032 (r1 Phoeni x 6040000 TL
0)
[ 0.000000] ACPI: SRAT 3BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD
1)
[ 0.000000] ACPI: SSDT 3BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP
1)
[ 0.000000] ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP
0)
[ 0.000000] ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP
1)
[ 0.000000] ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP
0)
[ 0.000000] ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP
1)
[ 0.000000] ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP
1)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 75MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000
- 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000
- 0000881000]
[ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000
- 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb394d] NEW RAMDISK ==> [0000881000
- 0000fb394d]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000
- 0000019000]
[ 0.000000] found SMP MP-table at [c00f8390] 000f8390
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003bf50
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x0003bf50
[ 0.000000] On node 0 totalpages: 245460
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3940 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 151 pages used for memmap
[ 0.000000] HighMem zone: 19131 pages, LIFO batch:3
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 -
0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000091000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 243541
[ 0.000000] Kernel command line:
root=UUID=43b16a97-1309-4f4a-ab79-f6e34866f740 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1900.306 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 4911680 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 953120k/982336k available (4126k kernel code, 28472k
reserved, 2208k data, 532k init, 77128k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3800.61 BogoMIPS (lpj=7601224)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017975] ACPI: Core revision 20080926
[ 0.020467] ACPI: Checking initramfs for custom DSDT
[ 0.320591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.362343] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[ 0.364001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3800.36
BogoMIPS (lpj=7600731)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.448210] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[ 0.448266] Brought up 2 CPUs
[ 0.448269] Total of 2 processors activated (7600.97 BogoMIPS).
[ 0.448265] System has AMD C1E enabled
[ 0.448265] Switch to broadcast mode on CPU1
[ 0.448363] CPU0 attaching sched-domain:
[ 0.448366] domain 0: span 0-1 level CPU
[ 0.448369] groups: 0 1
[ 0.448375] CPU1 attaching sched-domain:
[ 0.448377] domain 0: span 0-1 level CPU
[ 0.448380] groups: 1 0
[ 0.448448] Switch to broadcast mode on CPU0
[ 0.448448] net_namespace: 776 bytes
[ 0.448448] Booting paravirtualized kernel on bare hardware
[ 0.448448] Time: 20:12:50 Date: 05/09/09
[ 0.448448] regulator: core version 0.5
[ 0.448448] NET: Registered protocol family 16
[ 0.448448] EISA bus registered
[ 0.448448] ACPI: bus type pci registered
[ 0.448448] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.448448] PCI: MCFG area at e0000000 reserved in E820
[ 0.448448] PCI: Using MMCONFIG for extended config space
[ 0.448448] PCI: Using configuration type 1 for base access
[ 0.449109] ACPI: EC: Look up EC in DSDT
[ 0.453258] ACPI: BIOS _OSI(Linux) query ignored
[ 0.454178] ACPI: Interpreter enabled
[ 0.454182] ACPI: (supports S0 S3 S4 S5)
[ 0.454200] ACPI: Using IOAPIC for interrupt routing
[ 0.452023] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 0.458944] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.458947] ACPI: EC: driver started in interrupt mode
[ 0.459146] ACPI: No dock devices found.
[ 0.459156] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.459345] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf]
[ 0.459356] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f]
[ 0.459361] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f]
[ 0.459372] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.459378] pci 0000:00:01.1: PME# disabled
[ 0.459430] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6100000-0xf617ffff]
[ 0.459505] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6386000-0xf6386fff]
[ 0.459524] pci 0000:00:02.0: supports D1 D2
[ 0.459526] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459530] pci 0000:00:02.0: PME# disabled
[ 0.459552] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6389000-0xf63890ff]
[ 0.459573] pci 0000:00:02.1: supports D1 D2
[ 0.459575] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459579] pci 0000:00:02.1: PME# disabled
[ 0.459604] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6387000-0xf6387fff]
[ 0.459623] pci 0000:00:04.0: supports D1 D2
[ 0.459625] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459628] pci 0000:00:04.0: PME# disabled
[ 0.459651] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6389400-0xf63894ff]
[ 0.459671] pci 0000:00:04.1: supports D1 D2
[ 0.459673] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459677] pci 0000:00:04.1: PME# disabled
[ 0.459710] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.459743] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6380000-0xf6383fff]
[ 0.459762] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.459766] pci 0000:00:07.0: PME# disabled
[ 0.459820] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7]
[ 0.459824] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7]
[ 0.459828] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef]
[ 0.459832] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3]
[ 0.459835] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df]
[ 0.459839] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6384000-0xf6385fff]
[ 0.459877] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6388000-0xf6388fff]
[ 0.459882] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff]
[ 0.459886] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6389c00-0xf6389cff]
[ 0.459891] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6389800-0xf638980f]
[ 0.459902] pci 0000:00:0a.0: supports D1 D2
[ 0.459904] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459909] pci 0000:00:0a.0: PME# disabled
[ 0.459937] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459940] pci 0000:00:0c.0: PME# disabled
[ 0.459966] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.459969] pci 0000:00:0d.0: PME# disabled
[ 0.459990] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.460009] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.460014] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff]
[ 0.460020] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.460125] pci 0000:00:08.0: transparent bridge
[ 0.460165] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[ 0.460168] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 0.460172] pci 0000:00:0c.0: bridge 64bit mmio pref:
[0xf0000000-0xf1ffffff]
[ 0.460206] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff]
[ 0.460276] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[ 0.460286] bus 00 -> node 0
[ 0.460293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.460397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.460422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.460459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.492495] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
[ 0.492718] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *0, disabled.
[ 0.492938] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.493159] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.493379] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.493599] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.493824] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.494045] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.494265] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.494485] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 0.494705] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.494931] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.495153] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[ 0.495374] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[ 0.495595] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 0.495817] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[ 0.496048] ACPI: PCI Interrupt Link [Z014] (IRQs 18) *5
[ 0.496274] ACPI: PCI Interrupt Link [Z015] (IRQs 22) *10
[ 0.496499] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[ 0.496753] ACPI: WMI: Mapper loaded
[ 0.500121] SCSI subsystem initialized
[ 0.500129] libata version 3.00 loaded.
[ 0.500129] usbcore: registered new interface driver usbfs
[ 0.500129] usbcore: registered new interface driver hub
[ 0.500129] usbcore: registered new device driver usb
[ 0.500129] PCI: Using ACPI for IRQ routing
[ 0.504013] Bluetooth: Core ver 2.13
[ 0.508013] NET: Registered protocol family 31
[ 0.508013] Bluetooth: HCI device and connection manager initialized
[ 0.508016] Bluetooth: HCI socket layer initialized
[ 0.508018] NET: Registered protocol family 8
[ 0.508020] NET: Registered protocol family 20
[ 0.508030] NetLabel: Initializing
[ 0.508032] NetLabel: domain hash size = 128
[ 0.508033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.508047] NetLabel: unlabeled traffic allowed by default
[ 0.508062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.508067] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.512079] AppArmor: AppArmor Filesystem Enabled
[ 0.520022] Switched to high resolution mode on CPU 0
[ 0.520034] Switched to high resolution mode on CPU 1
[ 0.520049] pnp: PnP ACPI init
[ 0.520062] ACPI: bus type pnp registered
[ 0.523629] pnp: PnP ACPI: found 12 devices
[ 0.523632] ACPI: ACPI bus type pnp unregistered
[ 0.523635] PnPBIOS: Disabled by ACPI PNP
[ 0.523648] system 00:02: iomem range 0xe0000000-0xefffffff has been
reserved
[ 0.523655] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 0.523658] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.523661] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.523664] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 0.523667] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.523669] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.523676] system 00:04: ioport range 0x360-0x361 has been reserved
[ 0.523679] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.523687] system 00:0b: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 0.523690] system 00:0b: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.523693] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 0.523696] system 00:0b: iomem range 0xfed00000-0xfed00fff has been
reserved
[ 0.523699] system 00:0b: iomem range 0xfef00000-0xfef00fff has been
reserved
[ 0.558435] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
[ 0.558437] pci 0000:00:08.0: IO window: disabled
[ 0.558441] pci 0000:00:08.0: MEM window: disabled
[ 0.558443] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.558448] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.558450] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.558454] pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff
[ 0.558457] pci 0000:00:0c.0: PREFETCH window:
0x000000f0000000-0x000000f1ffffff
[ 0.558461] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[ 0.558463] pci 0000:00:0d.0: IO window: disabled
[ 0.558466] pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff
[ 0.558468] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.558477] pci 0000:00:08.0: setting latency timer to 64
[ 0.558482] pci 0000:00:0c.0: setting latency timer to 64
[ 0.558486] pci 0000:00:0d.0: setting latency timer to 64
[ 0.558490] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.558492] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.558494] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.558496] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.558499] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.558501] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.558503] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.558505] bus: 04 index 0 io port: [0x4000-0x4fff]
[ 0.558507] bus: 04 index 1 mmio: [0xf2000000-0xf3ffffff]
[ 0.558509] bus: 04 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.558511] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.558513] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.558516] bus: 03 index 1 mmio: [0xf6000000-0xf60fffff]
[ 0.558518] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.558520] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.558533] NET: Registered protocol family 2
[ 0.569077] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.569365] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.569897] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.570159] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.570162] TCP reno registered
[ 0.573101] NET: Registered protocol family 1
[ 0.573228] checking if image is initramfs... it is
[ 1.182257] Freeing initrd memory: 7370k freed
[ 1.182290] Simple Boot Flag at 0x36 set to 0x1
[ 1.182457] cpufreq: No nForce2 chipset.
[ 1.182584] audit: initializing netlink socket (disabled)
[ 1.182597] type=2000 audit(1241899970.180:1): initialized
[ 1.190907] highmem bounce pool size: 64 pages
[ 1.190912] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.192190] VFS: Disk quotas dquot_6.5.1
[ 1.192252] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.192870] fuse init (API version 7.10)
[ 1.192953] msgmni has been set to 1725
[ 1.193174] alg: No test for stdrng (krng)
[ 1.193186] io scheduler noop registered
[ 1.193189] io scheduler anticipatory registered
[ 1.193191] io scheduler deadline registered
[ 1.193207] io scheduler cfq registered (default)
[ 1.193240] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.193417] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.193433] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.193449] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.193466] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.193481] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.193497] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.193512] pci 0000:00:12.0: Boot video device
[ 1.199004] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.199030] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.199047] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X
[ 1.199054] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.199070] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.199107] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.199130] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.199143] pcieport-driver 0000:00:0d.0: irq 2302 for MSI/MSI-X
[ 1.199150] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.199162] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.199211] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.199223] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.200810] ACPI: AC Adapter [ACAD] (off-line)
[ 1.481352] ACPI: Battery Slot [BAT0] (battery present)
[ 1.481435] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.481437] ACPI: Power Button (FF) [PWRF]
[ 1.481481] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.481485] ACPI: Sleep Button (CM) [SLPB]
[ 1.481533] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.483256] ACPI: Lid Switch [LID]
[ 1.483325] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.483327] ACPI: Power Button (CM) [PWRB]
[ 1.483632] ACPI: processor limited to max C-state 1
[ 1.483661] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.483696] processor ACPI_CPU:00: registered as cooling_device0
[ 1.483701] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.483777] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.483799] processor ACPI_CPU:01: registered as cooling_device1
[ 1.483804] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.746758] ACPI Exception (thermal-0377): AE_OK, No or invalid critical
threshold [20080926]
[ 1.746813] isapnp: Scanning for PnP cards...
[ 2.099398] isapnp: No Plug & Play device found
[ 2.113288] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.114242] brd: module loaded
[ 2.114553] loop: module loaded
[ 2.114630] Fixed MDIO Bus: probed
[ 2.114637] PPP generic driver version 2.4.2
[ 2.114697] input: Macintosh mouse button emulation as
/devices/virtual/input/input4
[ 2.114733] Driver 'sd' needs updating - please use bus_type methods
[ 2.114741] Driver 'sr' needs updating - please use bus_type methods
[ 2.114786] ahci 0000:00:09.0: version 3.0
[ 2.115159] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 2.115171] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level,
low) -> IRQ 23
[ 2.115220] ahci 0000:00:09.0: irq 2301 for MSI/MSI-X
[ 2.115283] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 2.115286] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 2.115290] ahci 0000:00:09.0: setting latency timer to 64
[ 2.115726] scsi0 : ahci
[ 2.115853] scsi1 : ahci
[ 2.115945] scsi2 : ahci
[ 2.116045] scsi3 : ahci
[ 2.116136] ata1: SATA max UDMA/133 abar m8192 at 0xf6384000 port 0xf6384100
irq 2301
[ 2.116139] ata2: SATA max UDMA/133 abar m8192 at 0xf6384000 port 0xf6384180
irq 2301
[ 2.116142] ata3: SATA max UDMA/133 abar m8192 at 0xf6384000 port 0xf6384200
irq 2301
[ 2.116145] ata4: SATA max UDMA/133 abar m8192 at 0xf6384000 port 0xf6384280
irq 2301
[ 2.600034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.600811] ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC32P, max UDMA/100
[ 2.600814] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.601790] ata1.00: configured for UDMA/100
[ 2.920032] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.240028] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.560027] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.560129] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O
PQ: 0 ANSI: 5
[ 3.560225] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120
GB/111 GiB)
[ 3.560242] sd 0:0:0:0: [sda] Write Protect is off
[ 3.560244] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.560269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.560340] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120
GB/111 GiB)
[ 3.560354] sd 0:0:0:0: [sda] Write Protect is off
[ 3.560356] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.560379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.560383] sda: sda1 sda2 < sda5 >
[ 3.609571] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.609620] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.609869] pata_amd 0000:00:06.0: version 0.3.10
[ 3.609914] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.610013] scsi4 : pata_amd
[ 3.610109] scsi5 : pata_amd
[ 3.610463] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 3.610466] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 3.772309] ata5.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2
[ 3.772333] ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600)
ACPI=0x39f (120:600:0x12)
[ 3.788256] ata5.00: configured for MWDMA2
[ 3.788878] ata6: port disabled. ignoring.
[ 3.790130] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02
PQ: 0 ANSI: 5
[ 3.799514] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 3.799517] Uniform CD-ROM driver Revision: 3.20
[ 3.799625] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.799682] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.800206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.800585] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 3.800597] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level,
low) -> IRQ 22
[ 3.800617] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.800620] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.800676] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 3.800703] ehci_hcd 0000:00:02.1: debug port 1
[ 3.800707] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.800727] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6389000
[ 3.808038] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.808108] usb usb1: configuration #1 chosen from 1 choice
[ 3.808139] hub 1-0:1.0: USB hub found
[ 3.808147] hub 1-0:1.0: 7 ports detected
[ 3.808580] ACPI: PCI Interrupt Link [Z015] enabled at IRQ 22
[ 3.808584] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z015] -> GSI 22 (level,
low) -> IRQ 22
[ 3.808598] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.808601] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.808650] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 2
[ 3.808674] ehci_hcd 0000:00:04.1: debug port 1
[ 3.808678] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 3.808684] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6389400
[ 3.820032] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 3.820092] usb usb2: configuration #1 chosen from 1 choice
[ 3.820117] hub 2-0:1.0: USB hub found
[ 3.820124] hub 2-0:1.0: 2 ports detected
[ 3.820209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.820564] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 3.820574] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level,
low) -> IRQ 18
[ 3.820588] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.820591] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.820635] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 3
[ 3.820660] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6386000
[ 3.878077] usb usb3: configuration #1 chosen from 1 choice
[ 3.878103] hub 3-0:1.0: USB hub found
[ 3.878112] hub 3-0:1.0: 7 ports detected
[ 3.878521] ACPI: PCI Interrupt Link [Z014] enabled at IRQ 18
[ 3.878525] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z014] -> GSI 18 (level,
low) -> IRQ 18
[ 3.878538] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.878541] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.878583] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 4
[ 3.878594] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6387000
[ 3.934068] usb usb4: configuration #1 chosen from 1 choice
[ 3.934093] hub 4-0:1.0: USB hub found
[ 3.934102] hub 4-0:1.0: 2 ports detected
[ 3.934185] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.934263] usbcore: registered new interface driver libusual
[ 3.934302] usbcore: registered new interface driver usbserial
[ 3.934313] USB Serial support registered for generic
[ 3.934327] usbcore: registered new interface driver usbserial_generic
[ 3.934329] usbserial: USB Serial Driver core
[ 3.934374] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 3.962255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.962262] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.964059] mice: PS/2 mouse device common for all mice
[ 3.978519] rtc_cmos 00:07: RTC can wake from S4
[ 3.978553] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.978592] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.978659] device-mapper: uevent: version 1.0.3
[ 3.978755] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel at redhat.com
[ 3.978929] device-mapper: multipath: version 1.0.5 loaded
[ 3.978932] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.979048] EISA: Probing bus 0 at eisa.0
[ 3.979054] Cannot allocate resource for EISA slot 1
[ 3.979060] Cannot allocate resource for EISA slot 3
[ 3.979062] Cannot allocate resource for EISA slot 4
[ 3.979074] EISA: Detected 0 cards.
[ 3.979228] cpuidle: using governor ladder
[ 3.979290] cpuidle: using governor menu
[ 3.979793] TCP cubic registered
[ 3.979896] NET: Registered protocol family 10
[ 3.980304] lo: Disabled Privacy Extensions
[ 3.980615] NET: Registered protocol family 17
[ 3.980633] Bluetooth: L2CAP ver 2.11
[ 3.980635] Bluetooth: L2CAP socket layer initialized
[ 3.980637] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.980639] Bluetooth: SCO socket layer initialized
[ 3.980686] Bluetooth: RFCOMM socket layer initialized
[ 3.980693] Bluetooth: RFCOMM TTY layer initialized
[ 3.980694] Bluetooth: RFCOMM ver 1.10
[ 3.980752] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor
TK-57 processors (2 cpu cores) (version 2.20.00)
[ 3.980805] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12
[ 3.980809] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 3.980811] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 3.980813] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1a
[ 3.980865] Using IPI No-Shortcut mode
[ 3.980954] registered taskstats version 1
[ 3.981086] Magic number: 9:957:244
[ 3.981186] rtc_cmos 00:07: setting system clock to 2009-05-09 20:12:53 UTC
(1241899973)
[ 3.981189] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.981191] EDD information not available.
[ 3.981537] Freeing unused kernel memory: 532k freed
[ 3.981694] Write protecting the kernel text: 4128k
[ 3.981747] Write protecting the kernel read-only data: 1532k
[ 3.998482] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 4.143190] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 4.359791] usb 2-2: configuration #1 chosen from 1 choice
[ 4.537148] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[ 4.537552] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 4.537564] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20
(level, low) -> IRQ 20
[ 4.537570] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 5.090856] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr
00:1e:68:3d:5d:b0
[ 5.090860] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi
desc-v3
[ 5.174897] PM: Starting manual resume from disk
[ 5.174902] PM: Resume from partition 8:5
[ 5.174904] PM: Checking hibernation image.
[ 5.175053] PM: Resume from disk failed.
[ 5.223330] kjournald starting. Commit interval 5 seconds
[ 5.223350] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.754550] udev: starting version 141
[ 11.080481] acpi device:25: registered as cooling_device2
[ 11.080672] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6
[ 11.104355] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 11.230419] cfg80211: Calling CRDA to update world regulatory domain
[ 11.521597] cfg80211: World regulatory domain updated:
[ 11.521602] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 11.521605] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.521608] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.521611] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.521614] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.521616] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.847450] Linux agpgart interface v0.103
[ 12.032812] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.099312] Linux video capture interface: v2.00
[ 12.316483] nvidia: module license 'NVIDIA' taints kernel.
[ 12.509296] synaptics was reset on resume, see synaptics_resume_reset if you
have trouble on resume
[ 12.571194] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 12.571206] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level,
low) -> IRQ 16
[ 12.571213] nvidia 0000:00:12.0: setting latency timer to 64
[ 12.572589] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23
14:59:10 PST 2009
[ 12.876695] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 12.876708] ath5k_pci 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19
(level, low) -> IRQ 19
[ 12.876717] ath5k_pci 0000:03:00.0: setting latency timer to 64
[ 12.878242] ath5k_pci 0000:03:00.0: registered as 'phy0'
[ 12.909109] uvcvideo: Found UVC 1.00 device CNF7040 (04f2:b055)
[ 12.910895] input: CNF7040 as
/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input8
[ 12.918631] phy0: Selected rate control algorithm 'pid'
[ 12.920282] usbcore: registered new interface driver uvcvideo
[ 12.920308] USB Video Class driver (v0.1.0)
[ 13.253937] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 13.354821] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 13.354835] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21
(level, low) -> IRQ 21
[ 13.354917] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 13.581070] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 13.661236] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input9
[ 14.199164] lp: driver loaded but no devices found
[ 14.285326] Adding 2811332k swap on /dev/sda5. Priority:-1 extents:1
across:2811332k
[ 14.306275] EXT3 FS on sda1, internal journal
[ 14.823439] type=1505 audit(1241899984.338:2): operation="profile_load"
name="/sbin/dhclient-script" name2="default" pid=1982
[ 14.823592] type=1505 audit(1241899984.338:3): operation="profile_load"
name="/sbin/dhclient3" name2="default" pid=1982
[ 14.823644] type=1505 audit(1241899984.338:4): operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1982
[ 14.823694] type=1505 audit(1241899984.338:5): operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1982
[ 14.985097] type=1505 audit(1241899984.502:6): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1987
[ 14.985311] type=1505 audit(1241899984.502:7): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=1987
[ 15.018449] type=1505 audit(1241899984.535:8): operation="profile_load"
name="/usr/sbin/tcpdump" name2="default" pid=1991
[ 19.672388] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.672392] Bluetooth: BNEP filters: protocol multicast
[ 19.681642] Bridge firewalling registered
[ 21.650512] ppdev: user-space parallel port driver
[ 26.312012] Clocksource tsc unstable (delta = 4398046156189 ns)
[ 26.313032] forcedeth 0000:00:0a.0: irq 2300 for MSI/MSI-X
[ 26.313254] eth0: no link during initialization.
[ 26.313756] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.718800] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 58.269001] ath5k phy0: noise floor calibration timeout (2412MHz)
[ 60.782978] ath5k phy0: noise floor calibration timeout (2422MHz)
[ 61.552291] ath5k phy0: noise floor calibration timeout (2422MHz)
[ 61.731371] wlan0: authenticate with AP 00:1f:9f:14:e5:f3
[ 61.733235] wlan0: authenticated
[ 61.733245] wlan0: associate with AP 00:1f:9f:14:e5:f3
[ 61.735642] wlan0: RX AssocResp from 00:1f:9f:14:e5:f3 (capab=0x411
status=0aid=1)
[ 61.735650] wlan0: associated
[ 61.738561] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 61.828975] padlock: VIA PadLock not detected.
[ 72.309504] wlan0: no IPv6 routers present
hope someone can help. Note this only starts to occur after a fresh install and
then only after a while. For a wee while it boots and shutsdown without needing
to press the left arrow key.
ta for whatever help i can get
--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the kde-www
mailing list