Browser Printing Error
James Richard Tyrer
tyrerj at acm.org
Fri May 13 07:08:51 CEST 2005
Ramesh Patel wrote:
> Dear All
>
> I am using Wipro LQ1050 Printer it's same to Epson LQ-1050 on FC-3.
> Now in Brouser i use Acroread for Printing Reports. now my report size is
> 8.5X6 In. When i Print this then printer print it's Landscap.
> if i set it as Landscap or Prortet it also print Landscap.
>
> And this same Report print on Window Pc It' work fine.
>
>
> How to Add Page Size in LQ1050 Dot Metrix Printer Driver. ??
That isn't what page size for the printer is. It is the size of the
paper that is in the printer. If you want to fool something about the
paper size, it is the application you should lie to not the print system.
> Please Guid me How to solve this problem
First, make sure you don't have: "Expand small pages to paper size"
checked in the Acroread print dialog box. If you do, this is probably
the problem.
To trouble shoot this, print to a file with Acroread. Then you can open
the PS file with a text editor.
You should find something like:
%%BoundingBox: 0 0 612 792
in the heading of the PS file. That is in 72nds of an inch so just
divide by 72 to get the value in inches. This will tell you where on
the paper the PDF page will be printed. Note that in PS, this is
measured from the bottom left corner of the paper. So these four values
are x and y for the lower left corner and x and y for the upper right
corner. So, the above is for a full 8.5 x 11 page.
--
JRT
More information about the kde-print
mailing list