[kstars] [Bug 509113] New: Indi server and drivers are not properly stopped on stop from EKOS Setup

[Orestes]

https://bugs.kde.org/show_bug.cgi?id=509113

            Bug ID: 509113
           Summary: Indi server and drivers are not properly stopped on
                    stop from EKOS Setup
    Classification: Applications
           Product: kstars
      Version First 3.7.8
       Reported In:
          Platform: macOS (DMG)
                OS: macOS
            Status: REPORTED
          Severity: normal
          Priority: NOR
         Component: general
          Assignee: mutlaqja at ikarustech.com
          Reporter: orestes at estotienearreglo.es
  Target Milestone: ---

Created attachment 184719
  --> https://bugs.kde.org/attachment.cgi?id=184719&action=edit
Detected indiserver running

SUMMARY
indi server is not properly stopped when stoping from Ekos.

STEPS TO REPRODUCE
1. Open Kstars
2. Open Ekos
3. Select a profile on Ekos Setup tab.
   3bis. The profile has the "Auto connect" flag activated and the "Port
selector" flag deactivated.
4. Start the profile by pressing the Start button on the Ekos Setup tab.
5. Wait for all devices to connect and get ready. Open the INDI window to check
if all of them have started. In fact it is not necessary to wait for them to
proceed to next step.
6. Disconnect from devices using Disconnect button on Ekos Setup tab.
7. Stop the profile by pressing the Stop button on the Ekos Setup tab.
8. Start the profile by pressing the Start button on the Ekos Setup tab.

OBSERVED RESULT

A dialog shows that there is an instance of indi server already running:
[add image]

After clicking on the OK button, a new message shows, showing a communication
problem with the indi server:
[add image]

The indi-server process and all the drivers in the profile are not stopped.
Even after closing Ekos, the process are running.

$ pgrep -laf indi
18049 /Applications/kstars.app/Contents/MacOS/indiserver -v -p 7624 -m 1024 -r
0 -f /tmp/indififod912e66a
18050 indi_snapcap
18051 indi_simulator_ccd
18052 indi_rolloffino
18053 indi_simulator_telescope

EXPECTED RESULT

The indi server process and all the drivers in the profile are stopped.

Pressing the Start button on the Ekos Setup tab should start the indi server
and all the drivers in the profile. The INDI control window should show the
status of the drivers.

SOFTWARE/OS VERSIONS
KStars: 3.7.8 Stable
KDE Frameworks: 6.17.0
Qt: Using 6.8.3 and built against 6.8.3
macOS Sequoia (15.6)
Build ABI: x86_64-little_endian-lp64
Kernel: darwin 24.6.0


ADDITIONAL INFORMATION

A manual workaround: stop the indi server process and the drivers, using pkill.

1. First run pgrep to get the process id of the indi server and drivers
processes.
2. Then run pkill to kill the indi server process and all the drivers.

$ pgrep -laf indi_ indiserver
18049 /Applications/kstars.app/Contents/MacOS/indiserver -v -p 7624 -m 1024 -r
0 -f /tmp/indififod912e66a
18050 indi_snapcap
18051 indi_simulator_ccd
18052 indi_rolloffino
18053 indi_simulator_telescope

$ pkill -9 -l indi_ indiserver

-- 
You are receiving this mail because:
You are watching all bug changes.