[kde-linux] KDE 3.5.0 + dbus/hal trouble

Wed Mar 1 12:10:56 UTC 2006

On Tuesday 28 February 2006 20:39, Bram Schoenmakers wrote:
> Op dinsdag 28 februari 2006 10:56, schreef Tomek Jarzynka:
> > I've been trying to get KDE 3.5.0 running with DBUS/hal for a few days
> > now, with no success. KDE is compiled with dbus support, there is an
> > option checked in the configuration, but media:/ shows only some network
> > shares, no hardware, nevermind the hotplug notification.
> Does /var/log/messages show anything hardware related at the moment you
> (un)plug something?

When I plug in a pendrive:

----------------- start
Mar  1 13:06:34 aereo kernel: drivers/usb/input/hid-core.c: input irq status 
-75 received
Mar  1 13:06:34 aereo kernel: hub 1-0:1.0: port 1 disabled by hub (EMI?), 
re-enabling...
Mar  1 13:06:34 aereo kernel: usb 1-1: USB disconnect, address 4
Mar  1 13:06:35 aereo hal.hotplug[27533]: DEVPATH is not set (subsystem input)
Mar  1 13:06:35 aereo hal.hotplug[27536]: DEVPATH is not set (subsystem input)
Mar  1 13:06:35 aereo kernel: usb 1-1: new low speed USB device using uhci_hcd 
and address 5
Mar  1 13:06:35 aereo hal.hotplug[27599]: DEVPATH is not set (subsystem input)
Mar  1 13:06:35 aereo kernel: input: USB HID v1.10 Keyboard [1267:0103] on 
usb-0000:00:1d.0-1
Mar  1 13:06:35 aereo hal.hotplug[27647]: DEVPATH is not set (subsystem input)
Mar  1 13:06:35 aereo kernel: input: USB HID v1.10 Device [1267:0103] on 
usb-0000:00:1d.0-1
Mar  1 13:06:41 aereo kernel: usb 4-4: new high speed USB device using 
ehci_hcd and address 5
Mar  1 13:06:42 aereo kernel: Initializing USB Mass Storage driver...
Mar  1 13:06:42 aereo kernel: scsi0 : SCSI emulation for USB Mass Storage 
devices
Mar  1 13:06:42 aereo kernel: usbcore: registered new driver usb-storage
Mar  1 13:06:42 aereo kernel: USB Mass Storage support registered.
Mar  1 13:06:47 aereo kernel:   Vendor: Kingston  Model: DataTraveler 2.0  
Rev: 1.04
Mar  1 13:06:47 aereo kernel:   Type:   Direct-Access                      
ANSI SCSI revision: 00
Mar  1 13:06:47 aereo kernel: Attached scsi generic sg0 at scsi0, channel 0, 
id 0, lun 0,  type 0
Mar  1 13:06:48 aereo scsi.agent[27863]: disk 
at /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host0/target0:0:0/0:0:0:0
Mar  1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors 
(513 MB)
Mar  1 13:06:49 aereo kernel: sda: Write Protect is off
Mar  1 13:06:49 aereo kernel: sda: assuming drive cache: write through
Mar  1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors 
(513 MB)
Mar  1 13:06:49 aereo kernel: sda: Write Protect is off
Mar  1 13:06:49 aereo kernel: sda: assuming drive cache: write through
Mar  1 13:06:49 aereo kernel:  /dev/scsi/host0/bus0/target0/lun0: p1
Mar  1 13:06:49 aereo kernel: Attached scsi removable disk sda at scsi0, 
channel 0, id 0, lun 0
----------------- end

What's more,
hal-devies shows (among other non-relevant output like HID etc):

----------------- start
3: udi = 
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0'
  info.udi = 
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'USB Mass Storage Interface'  (string)
  usb.interface.protocol = 80  (0x50)  (int)
  usb.interface.subclass = 6  (0x6)  (int)
  usb.interface.class = 8  (0x8)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0'  (string)
  usb.configuration_value = 1  (0x1)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.vendor_id = 2352  (0x930)  (int)
  usb.product_id = 25907  (0x6533)  (int)
  usb.vendor = 'Toshiba Corp.'  (string)
  usb.product = 'USB Mass Storage Interface'  (string)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.max_power = 200  (0xc8)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.serial = '0E41D850838288EE'  (string)
  usb.speed_bcd = 294912  (0x48000)  (int)
  usb.version_bcd = 512  (0x200)  (int)
  usb.is_self_powered = false  (bool)
  usb.can_wake_up = false  (bool)
  usb.bus_number = 4  (0x4)  (int)
  info.bus = 'usb'  (string)
  info.parent = 
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE'  (string)
  linux.sysfs_path_device = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0'  (string)
  linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0'  (string)

4: udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE'
  info.udi = 
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE'  (string)
  linux.subsystem = 'usb'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.is_self_powered = false  (bool)
  usb_device.version_bcd = 512  (0x200)  (int)
  usb_device.speed_bcd = 294912  (0x48000)  (int)
  usb_device.serial = '0E41D850838288EE'  (string)
  usb_device.linux.device_number = 5  (0x5)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.max_power = 200  (0xc8)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  info.product = 'DataTraveler 2.0'  (string)
  usb_device.product = 'DataTraveler 2.0'  (string)
  info.vendor = 'Toshiba Corp.'  (string)
  usb_device.vendor = 'Toshiba Corp.'  (string)
  usb_device.product_id = 25907  (0x6533)  (int)
  usb_device.vendor_id = 2352  (0x930)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4'  (string)
  info.linux.driver = 'usb'  (string)
  info.bus = 'usb_device'  (string)
  linux.sysfs_path_device = 
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4'  (string)
----------------- end

However, media:/ doesn't get updated anyway! :(

-- 
tomasz k. jarzynka / 601 706 601 / tomee(a-t)kadu(d-o-t)net

"Stany Zjednoczone w żadnym razie nie wspierają się na doktrynie
chrześcijańskiej. (Jerzy Waszyngton)"