[kde-linux] USB not working with SuSE 10.2
Richard Pace
rpace at sbcglobal.net
Sat Dec 30 01:30:51 UTC 2006
I've reported this to Novell, bug report 231118. I thought I'd check here if anyone has
experienced this problem. I've installed SuSE 10.2 on a new HP Pavilion with AMD Athlon 64 X2 Dual.
I had to use boot option ACPI=off in order to install. Otherwise, the boot hangs at "Starting udev...".
After installation of 10.2, I still have to use ACPI=off (does not power off at shutdown either,
but that's another problem).
Now for the problem. External USB drive is not recogized when plugged into USB 2.0 port.
External drive has its own power supply. Also, USB memory stick is not recognized when plugged into USB port.
I know the ports work, since I have Windows XP installed as dual boot, and Windows XP has no problem recongizing the devices.
There is no /proc/bus/usb define.
lsusb shows no devices. lsmod shows usbcore installed along with ohci_hcd and ehci_hcd.
I have attached my startup log which shows some errors with ohci_hcd and ehci_hcd.
Specifically, these lines appears in the log:
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
....
<7>PCI: Setting latency timer of device 0000:00:10.1 to 64
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
....
<4>PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Probably buggy MP table.
<3>ohci_hcd 0000:00:0b.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:0b.0 setup!
<3>ohci_hcd 0000:00:0b.0: init 0000:00:0b.0 fail, -19
<4>PCI: No IRQ known for interrupt pin B of device 0000:00:0b.1. Probably buggy MP table.
<3>ehci_hcd 0000:00:0b.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:0b.1 setup!
<3>ehci_hcd 0000:00:0b.1: init 0000:00:0b.1 fail, -19
Any suggestions and/or comments appreciated.
--
Regards,
Richard
-------------- next part --------------
Inspecting /boot/System.map-2.6.18.2-34-default
Loaded 23895 symbols from /boot/System.map-2.6.18.2-34-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Bootdata ok (command line is root=/dev/sda6 vga=0x317 resume=/dev/sda5 splash=silent acpi=off)
<5>Linux version 2.6.18.2-34-default (geeko at buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
<4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
<4> BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
<4> BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
<4> BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>DMI present.
<6>Scanning NUMA topology in Northbridge 24
<6>Number of nodes 1
<6>Node 0 MemBase 0000000000000000 Limit 000000007bef0000
<7>NUMA: Using 63 for the hash shift.
<6>Using node hash shift of 63
<6>Bootmem setup node 0 0000000000000000-000000007bef0000
<7>On node 0 totalpages: 499545
<7> DMA zone: 2893 pages, LIFO batch:0
<7> DMA32 zone: 496652 pages, LIFO batch:31
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<4>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<6>Processor #0 15:11 APIC version 17
<6>Processor #1 15:11 APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<6>Setting APIC routing to physical flat
<6>Processors: 2
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<4>Built 1 zonelists. Total pages: 499545
<5>Kernel command line: root=/dev/sda6 vga=0x317 resume=/dev/sda5 splash=silent acpi=off
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
<6>time.c: Detected 2004.214 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Checking aperture...
<4>CPU 0: aperture @ 7e000000 size 32 MB
<4>Aperture too small (32 MB)
<4>No AGP bridge found
<4>Memory: 1991528k/2030528k available (1915k kernel code, 38612k reserved, 1278k data, 188k init)
<4>Calibrating delay using timer specific routine.. 4014.40 BogoMIPS (lpj=8028815)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>SMP alternatives: switching to UP code
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3392k freed
<4>ExtINT not setup in hardware but reported by MP table
<6>Using IO-APIC 2
<6>Using local APIC timer interrupts.
<4>result 12526353
<6>Detected 12.526 MHz APIC timer.
<6>SMP alternatives: switching to SMP code
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 4008.63 BogoMIPS (lpj=8017269)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<4>AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
<6>CPU 1: Syncing TSC to CPU 0.
<6>CPU 1: synchronized TSC with CPU 0 (last diff 21 cycles, maxerr 485 cycles)
<6>Brought up 2 CPUs
<6>testing NMI watchdog ... OK.
<4>migration_cost=285
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter disabled.
<4>PCI: Probing PCI hardware
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:00:05.0
<6>PCI: Transparent bridge - 0000:00:10.0
<6>PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 5
<6>PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 10
<6>PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 11
<6>PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 7
<6>PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 11
<4>PCI: using PPB 0000:00:10.0[B] to get irq 7
<6>PCI->APIC IRQ transform: 0000:02:05.0[B] -> IRQ 7
<4>PCI: using PPB 0000:00:10.0[B] to get irq 7
<6>PCI->APIC IRQ transform: 0000:02:09.0[B] -> IRQ 7
<6>PCI-DMA: Disabling IOMMU.
<6>PCI: Bridge: 0000:00:04.0
<6> IO window: a000-afff
<6> MEM window: fdd00000-fddfffff
<6> PREFETCH window: fde00000-fdefffff
<6>PCI: Bridge: 0000:00:10.0
<6> IO window: b000-bfff
<6> MEM window: fdc00000-fdcfffff
<6> PREFETCH window: f4000000-f7ffffff
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<7>PCI: Setting latency timer of device 0000:00:10.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>audit: initializing netlink socket (disabled)
<5>audit(1167334419.416:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<4>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:04.0:pcie00]
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 6144k, total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3).
<4>Console: switching to colour frame buffer device 124x44
<6>fb0: VESA VGA frame buffer device
<6>Real Time Clock Driver v1.12ac
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<6>Freeing unused kernel memory: 188k freed
<4>logips2pp: Detected unknown logitech mouse model 0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
<6>NFORCE-MCP51: chipset revision 161
<6>NFORCE-MCP51: not 100% native mode: will probe irqs later
<6>NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<6>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
<4>hda: HL-DT-STDVDRRW GSA-H20L, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>libata version 2.00 loaded.
<7>sata_nv 0000:00:0e.0: version 2.0
<7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
<6>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 10
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 10
<6>scsi0 : sata_nv
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>ata1.00: ATA-7, max UDMA/100, 390721968 sectors: LBA48 NCQ (depth 0/32)
<6>ata1.00: ata1: dev 0 multi count 1
<6>ata1.00: configured for UDMA/100
<6>scsi1 : sata_nv
<6>ata2: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x977
<5> Vendor: ATA Model: ST3200827AS Rev: 3.AH
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 sda6 sda7 >
<5>sd 0:0:0:0: Attached scsi disk sda
<7>PCI: Setting latency timer of device 0000:00:0f.0 to 64
<6>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC800 irq 11
<6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC808 irq 11
<6>scsi2 : sata_nv
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>ata3: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x9E7
<6>scsi3 : sata_nv
<6>ata4: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x967
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<7>Losing some ticks... checking if CPU frequency changed.
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
<7>PCI: Setting latency timer of device 0000:00:14.0 to 64
<6>forcedeth: using HIGHDMA
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>eth0: forcedeth.c: subsystem: 0103c:2a41 bound to 0000:00:14.0
<7>PCI: Setting latency timer of device 0000:00:10.1 to 64
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>Linux video capture interface: v2.00
<7>ieee1394: Initialized config rom entry `ip1394'
<6>hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>ivtv: ==================== START INIT IVTV ====================
<6>ivtv: version 0.8.0 (tagged release) loading
<6>ivtv: Linux version: 2.6.18.2-34-default SMP mod_unload gcc-4.1
<6>ivtv: In case of problems please include the debug info between
<6>ivtv: the START INIT IVTV and END INIT IVTV lines, along with
<6>ivtv: any module options, when mailing the ivtv-users mailinglist.
<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4 (0x14/0x17/0x16/0x15/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x1e, din_in=0x0
<7>ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0
<6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
<6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
<4>PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Probably buggy MP table.
<3>ohci_hcd 0000:00:0b.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:0b.0 setup!
<3>ohci_hcd 0000:00:0b.0: init 0000:00:0b.0 fail, -19
<4>PCI: No IRQ known for interrupt pin B of device 0000:00:0b.1. Probably buggy MP table.
<3>ehci_hcd 0000:00:0b.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:0b.1 setup!
<3>ehci_hcd 0000:00:0b.1: init 0000:00:0b.1 fail, -19
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7] MMIO=[fdcff000-fdcff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
<6>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
<6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
<6>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
<6>ivtv0: did you put the firmware in the hotplug firmware directory?
<6>ivtv0 warning: failed loading encoder firmware
<6>ivtv0 warning: Error loading firmware -3!
<3>ivtv0: Error -3 initializing firmware.
<3>Trying to free already-free IRQ 7
<3>ivtv0: Error -12 on initialization
<4>ivtv: probe of 0000:02:09.0 failed with error -12
<6>ivtv: ==================== END INIT IVTV ====================
<6>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000ed3868]
<6>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
<6>ivtv0: did you put the firmware in the hotplug firmware directory?
<6>ivtv0 warning: failed loading encoder firmware
<6>ivtv0 warning: Error loading firmware -3!
<3>ivtv0: Error -3 initializing firmware.
<3>Trying to free already-free IRQ 7
<3>ivtv0: Error -12 on initialization
<4>ivtv: probe of 0000:02:09.0 failed with error -12
<6>Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel at redhat.com
<6>loop: loaded (max 8 devices)
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>NTFS driver 2.1.27 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>AppArmor: AppArmor initialized
<5>audit(1167334432.636:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Thu Dec 28 19:33:39 2006
Trying manual resume from /dev/sda5
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading amd74xx
Loading libata
Loading sata_nv
Loading processor
Loading thermal
FATAL: Error inserting thermal (/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/thermal.ko): No such device
Loading fan
FATAL: Error inserting fan (/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/fan.ko): No such device
Loading edd
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/sda5
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/sda6 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda6
/dev/sda6: Superblock last write time is in the future. FIXED.
/dev/sda6: clean, 239950/2626560 files, 1402147/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda6
Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Dec 28 11:33:44 2006
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
/dev/sda7: Superblock last write time is in the future. FIXED.
/dev/sda7: clean, 611/12713984 files, 447684/25400765 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
/dev/sda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
done<notice>'boot.localfs start' exits with status 0
<notice>boot.apparmor start
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.cycle start
<notice>'boot.cycle start' exits with status 6
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(856,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
Retry device configurationdone
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>SuSEfirewall2_init start
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>'SuSEfirewall2_init start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(856,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Thu Dec 28 19:34:07 2006
<notice>Master Resource Control: previous runlevel: N, switching to runlevel: 5
Loading AppArmor profiles - AppArmor already loaded with profiles.skipped
acpid: no ACPI support in kernelskipped
startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 acpi=off SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
done
Initializing random number generatordone
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 acpi=off SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Starting resource managerdone
Starting irqbalance unused
<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
Starting PolicyKit daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modules (CPUFreq not supported)
Loading keymap i386/qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done<notice>pidofproc: dhcpcd 3066
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: nVidia Corporation MCP51 Ethernet Controller (rev a3)
eth0 configuration: eth-id-00:18:f3:89:05:4c
eth0 (DHCP) . IP/Netmask: 192.168.1.1 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Checking/updating CPU microcode unused
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>killproc: kill(2445,20)
<notice>killproc: kill(2428,1)
<notice>killproc: kill(2445,18)
<notice>killproc: kill(2445,12)
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting auditd done
Starting ZENworks Management Daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 acpi=off QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting service kdmdone
Starting cupsddone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: acpid irq_balancer smbfs nfs microcode
<notice>killproc: kill(2347,3)
More information about the kde-linux
mailing list