[Kde-hardware-devel] Solid backends restructured - but where is the HAL backend?

[Christian Esken]

Am Freitag, 29. Dezember 2006 18:12 schrieb Kevin Ottens:
> Le Vendredi 29 Décembre 2006 18:06, Christian Esken a écrit :
> > Thanks for the explantion.
> >
> > I checked the place and it is there. But my application (and also
> > "solidshell hardware list") only finds the fake stuff. I then incrementaly
> > started reinstalling everything. After several tries I also removed an old
> > Qt4.2.0 installation and again reinstalled (remove
> > installaton/clean/compile/install) complete KDE4. But I have still no
> > success (see log below).
> 
> Are you sure your sycoca database is up to date?
> Also try to "kcmshell kcm_solid" it'll list all the backends found in the 
> sycoca database. If it's not here that's definitely a sycoca issue, in this 
> case kbuildsycoca will probably fix it.

Thanks so much for diagnosing from remote. You directly hit it - I would never have thought about sycoca. I'll keep this in mind now.
Now I can go back to KMix hotplugging. :-)

Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if1'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_alsa_playback_2_0'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_pcm_2_0'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_pcm_2_0_0'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_oss_mixer_2__1'
Plugged udi='/org/freedesktop/Hal/devices/usb_device_d8c_1_noserial_if0_alsa_control_2__1'

  Christian