[education/kstars] doc: Fix handbook link

[Jasem Mutlaq]

Git commit 2fddd09c35c4cca149510a4bcb0f67f133d7e4ed by Jasem Mutlaq, on behalf of Hy Murveit.
Committed on 05/08/2023 at 07:03.
Pushed by mutlaqja into branch 'master'.

Fix handbook link

M  +1    -1    doc/ekos-guide.docbook

https://invent.kde.org/education/kstars/-/commit/2fddd09c35c4cca149510a4bcb0f67f133d7e4ed

diff --git a/doc/ekos-guide.docbook b/doc/ekos-guide.docbook
index ee07a7ade..6bca4abaf 100644
--- a/doc/ekos-guide.docbook
+++ b/doc/ekos-guide.docbook
@@ -323,7 +323,7 @@
             With GPG guiding, the internal guider uses predictive and adaptive guiding for the RA axis. This adaptively models the periodic error of the mount, and adds its predicted contribution to each guide pulse. 
         </para>
         <para>
-          The main settings to consider are Major Period and Estimate Period. If you know the worm period for your mount, perhaps by examining <ulink url="g/phd2/wiki/Mount-Worm-Period-Info">this table</ulink>, then uncheck Estimate Period, and enter your known Major Period. If not, then check Estimate Period.  Intra-frame dark guiding can be used to "spread out the GPG prediction. For instance, if you guide at 5s, you can set the dark guiding interval to 1s and its prediction is pulsed every second, but the guiding drift correction would be sent every 5s. In this way, it outputs the predicted corrections much faster than the guide camera exposure rate, effectively performing periodic error correction and allowing longer guide camera exposures. All the other parameters are best left to defaults.
+          The main settings to consider are Major Period and Estimate Period. If you know the worm period for your mount, perhaps by examining <ulink url="https://github.com/OpenPHDGuiding/phd2/wiki/Mount-Worm-Period-Info">this table</ulink>, then uncheck Estimate Period and enter your known Major Period. If not, then check Estimate Period.  Intra-frame dark guiding can be used to "spread out the GPG prediction. For instance, if you guide at 5s, you can set the dark guiding interval to 1s and its prediction is pulsed every second, but the guiding drift correction would be sent every 5s. In this way, it outputs the predicted corrections much faster than the guide camera exposure rate, effectively performing periodic error correction and allowing longer guide camera exposures. All the other parameters are best left to defaults.
         </para>
     </sect3>
     <sect3 id="guide-dark-frames">