Review Request 109792: Update 'dim display' algorithm.

Tue Apr 2 12:31:43 BST 2013

> On March 31, 2013, 4:14 p.m., Àlex Fiestas wrote:
> > To be honest I don't like adding yet another configuration option by default, a configuration option that apparently is needed only in some systems.
> > 
> > There is no other alternative than this?
> 
> Danny Baumann wrote:
>     Well, I don't see any. I tried to approach this at the kernel level first, but the kernel people rejected the idea. But I don't see it as a big problem either: E.g. Windows (which isn't an example of overconfigurability) has a dimmed brightness setting as well. While it's required for my laptop, I think it can be useful for other people as well. When I hit the problem, at first I couldn't believe this isn't configurable either ;)
>     
>     BTW, one thing I'm not yet certain about is whether the option should be 'dim to' or 'dim by'. Currently it's the former, but the latter might it make more obvious that the value is relative to the non-dimmed brightness.
> 
> Sebastian Kügler wrote:
>     Just set the minimum brightness to 1 instead of 0. We're generally not adding config options for this kind of things.
> 
> Danny Baumann wrote:
>     That doesn't help though, as with intel-backlight 1 is still way too low to be visible. I think the value corresponding to acpi value 0 is about 5%. At this point, I think, I would alter the acpi behaviour again. Also, if the user had set the brightness to 0 before for some reason (e.g. because he's working in the evening), 'dim display' would suddenly make the display more bright.
>     In general, the problem is the different backlight interfaces just behave differently, which is why I think this problem can't be solved with a hardcoded value as long as it's not possible to detect the used sysfs file (which isn't the case as long as the used X driver provides a backlight interface via Xrandr).
>
> 
> Sebastian Kügler wrote:
>     The "dim can brighten up" is a different problem that needs a different solution, it's unrelated here.
>     
>     I don't see how a config option solves this problem. Even with a config option, we still don't know what the default should be. Also, users are not going to look for such an option (which maybe says enough about the option itself). Users are going to hit the brightness slider when the brightness is too low, so 1 actually does make sense.
> 
> Danny Baumann wrote:
>     A sane value for the default would be 'retain current behaviour' (that is: dim by 100%).
>     Is there evidence for the 'users are not going to look for such an option' assertion? I know for a fact that I _did_ search for that option (until I looked up in the source that it's nowhere to be found). Surely this one sample doesn't represent the KDE user base - but do you have any representative data, especially given that the KDE user base in general doesn't have a problem with a slightly-higher-than-usual amount of settings (which is also evident in the very dialog we're talking about: are there that many users who look for e.g. a highly configurable 'run script on power status change' option?)
>     
>     I'm also not sure what you mean by 'Users are going to hit the brightness slider when the brightness is too low', as we're talking about the dimmed-down case after all, where the user was idle for the configured amount of time. But as I wrote above, neither 0 nor 1 works for any user who is not using the acpi_video backlight controls for whatever reason (e.g. because it's buggy, or simply not present at all). I'm open for suggestions on how to fix this problem without config option (even if I think the option makes sense), but just raising the hardcoded value from 0 to 1 definitely does not help.

What would probably make sense it to use 10% or 1 (whichever is more) as lowest value. We do know the max value, so we can make sure it's low, but not zero. This should be tried.

How does raising it from 0 to 1 not help, btw?

- Sebastian

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
http://git.reviewboard.kde.org/r/109792/#review30173
-----------------------------------------------------------

On March 31, 2013, 4:07 p.m., Danny Baumann wrote:
> 
> -----------------------------------------------------------
> This is an automatically generated e-mail. To reply, visit:
> http://git.reviewboard.kde.org/r/109792/
> -----------------------------------------------------------
> 
> (Updated March 31, 2013, 4:07 p.m.)
> 
> 
> Review request for kde-workspace and Solid.
> 
> 
> Description
> -------
> 
> This change does two things:
> - No longer dim display before the dim time set by the user elapses.
>   This fixes bug #304696
> - No longer assume that 0% display brightness produces a visible result.
>   This doesn't work with the intel-backlight backlight interface (as it
>   turns off the backlight at 0% brightness). According to the kernel
>   developers (see [1] and [2]), this isn't a safe assumption to make for
>   other backlight interfaces either. Instead of always dimming to 0%,
>   make the amount of dimming configurable.
> 
> [1]
> http://lists.freedesktop.org/archives/intel-gfx/2013-March/026152.html
> [2]
> http://lists.freedesktop.org/archives/intel-gfx/2013-March/026140.html
> 
> 
> This addresses bug 304696.
>     http://bugs.kde.org/show_bug.cgi?id=304696
> 
> 
> Diffs
> -----
> 
>   powerdevil/daemon/actions/bundled/dimdisplay.h 426640ca7a2a2d23044052710fdfb4b1f65617d1 
>   powerdevil/daemon/actions/bundled/dimdisplay.cpp 11554e3ba5d2f67d4d1de9d61c744c6c40a32d27 
>   powerdevil/daemon/actions/bundled/dimdisplayconfig.h 14b787937249a512cf958a31fd3bd71d6051540d 
>   powerdevil/daemon/actions/bundled/dimdisplayconfig.cpp bc116d6216c4624cbf14489d739d9d226fb70ff3 
> 
> Diff: http://git.reviewboard.kde.org/r/109792/diff/
> 
> 
> Testing
> -------
> 
> 
> Thanks,
> 
> Danny Baumann
> 
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/kde-core-devel/attachments/20130402/da07f376/attachment.htm>