[Kde-bindings] Fw: Qyoto Smokegen SmokeQt Windows Build Help

Dimitar Dobrev dpldobrev at yahoo.com
Wed Jul 18 14:43:10 UTC 2012


I think there are some files you haven't copied. I'm going to explain point 1. a bit more thoroughly. Let's say that your binary dir for smokeqt is C:\smokeqt. In its bin/ subdir you have all smoke libs - smokebase.dll, smokeqtcore.dll, smokeqtgui.dll, etc. - this is what smoke*.dll from the instructions means. You need to grab all of these, and copy them to your binary dir for assemblygen, that is, they should neighbour assemblygen.exe. The other way would be for C:\smokeqt\bin to be in your PATH.

Regards,
Dimitar Dobrev



________________________________
 From: Daniel <twinjudgewarrior at hotmail.com>
To: 'Dimitar Dobrev' <dpldobrev at yahoo.com>; 'KDE bindings for other programming languages' <kde-bindings at kde.org> 
Sent: Wednesday, July 18, 2012 5:20 PM
Subject: RE: [Kde-bindings] Fw:  Qyoto Smokegen SmokeQt Windows Build Help
 

Thanks again Dimitar,

I misread the instructions for point one and did not put in the ‘bin’ directory but rather put them in the binary output directory as marked by the CMAKE_INSTALL_PREFIX. Noting that adding the Qyoto bin to the PATH has the same effect.

However, the build still fails further down the track. I hope this time for sanity sake that it is not point 2.. lol
 
 
In the meantime I appreciate your pointers and help and am learning as much as I can about these new tools.

Best,
 
Daniel Kemp
 
From:kde-bindings-bounces at kde.org [mailto:kde-bindings-bounces at kde.org] On Behalf Of Dimitar Dobrev
Sent: Wednesday, 18 July 2012 10:54 PM
To: KDE bindings
Subject: [Kde-bindings] Fw: Qyoto Smokegen SmokeQt Windows Build Help
 
Hi, Daniel,
 
Please try point 1. from "Notes about assemblygen" in the instructions.
 
Regards
 

________________________________

From:Daniel <twinjudgewarrior at hotmail.com>
To: 'Dimitar Dobrev' <dpldobrev at yahoo.com>; 'KDE bindings for other programming languages' <kde-bindings at kde.org> 
Sent: Wednesday, July 18, 2012 3:20 PM
Subject: RE: [Kde-bindings] Qyoto Smokegen SmokeQt Windows Build Help
 
Hi Dimitar,
 
Thanks for the quick reply. I have been able to get past the problem I was experiencing with the smokeqt libraries; thank you. Your simpler instructions enabled me to find what was wrong. It is a pity I missed them when searching the archives.. I am using Gmane to read and search them.. I don’t know if there are any better alternatives. To fix my original problems I had to manually port the Qtcore4 dll, mingwm10 dll and other dependencies to the Smokgen install at C:\Program Files (86). The difficulties may have something to do with the fact that I install all of my ‘tools’ on I:\.. separate drive from C:\Program Files (86). I also needed admin privilege’s to finish the install. (standard and implied)

However, no party yet as I am now getting an issue with assemblygen. Assuming I have the first two libraries built correctly..

Debugging with VS2010 tells me the same thing. Assemblygen.exe could not find the dll… it is in the BUILD_DIR/bin path… along with the exe.

Any ideas?
 
Regards, 

Daniel Kemp
From:kde-bindings-bounces at kde.org [mailto:kde-bindings-bounces at kde.org] On Behalf Of Dimitar Dobrev
Sent: Wednesday, 18 July 2012 6:31 PM
To: KDE bindings for other programming languages
Subject: Re: [Kde-bindings] Qyoto Smokegen SmokeQt Windows Build Help
 
Hi, Daniel,
 
Could you try these instrucations: http://lists.kde.org/?l=kde-bindings&m=133865974413799&w=2 ? Just make sure to skip point 7 (the commenting out of mapPointer).
 
Regards,
Dimitar Dobrev
 

________________________________

From:Daniel <twinjudgewarrior at hotmail.com>
To: Kde-bindings at kde.org 
Sent: Wednesday, July 18, 2012 10:41 AM
Subject: [Kde-bindings] Qyoto Smokegen SmokeQt Windows Build Help
 
Hi,

I am interested in building Qyoto on Windows. I have been following the instructions through which I have learnt that the Qyoto repo at KDE is no longer supported.. I did however manage to build this older version in linux; Ubuntu, after mush now wasted time. I am quite new to many of the concepts involved with make/cmake as I most of my development has been with Java for the web using IDE’s like eclipse. I managed to make a few sample widgets and windows using my linux of the unsupported version of Qyoto build to find out they do not work on Windows. So I dug deeper…

Anyhow, after following the instructions based on this email:

From: Steven Boswell II <ulatekh <at> yahoo.com>
Subject: Re: Building Qyoto on Windows
Newsgroups: gmane.comp.kde.devel.bindings
Date: 2012-06-02 17:56:13 GMT (6 weeks, 3 days, 9 hours and 15 minutes ago)

I can successfully build smokegen but during the build for smokeqt under the Qt Creator it fails almost instantly with this output: 

17:27:10: Running build steps for project SMOKEQT4...
17:27:11: Starting: "I:\QtSDK\mingw\bin\mingw32-make.exe" 
[ 1%] Generating smokedata.cpp, x_1.cpp, x_2.cpp, x_3.cpp, x_4.cpp, x_5.cpp, x_6.cpp, x_7.cpp, x_8.cpp, x_9.cpp, x_10.cpp, x_11.cpp, x_12.cpp, x_13.cpp, x_14.cpp, x_15.cpp, x_16.cpp, x_17.cpp, x_18.cpp, x_19.cpp, x_20.cpp
mingw32-make.exe[2]: *** [qtcore/smokedata.cpp] Error -1073741515
mingw32-make.exe[1]: *** [qtcore/CMakeFiles/smokeqtcore.dir/all] Error 2
mingw32-make.exe: *** [all] Error 2
17:27:11: The process "I:\QtSDK\mingw\bin\mingw32-make.exe" exited with code 2.
Error while building project SMOKEQT4 (target: Desktop)
When executing build step 'Make'
 
I am wanting to try Qyoto for a new project I wish to work on but keep hitting brickwalls. Given the nature of Qt and Mono paired together I will want to ensure that this product works properly on windows.

Any help building and assessing this product will be highly appreciated.

Regards,
Daniel Kemp 

_______________________________________________
Kde-bindings mailing list
Kde-bindings at kde.org
https://mail.kde.org/mailman/listinfo/kde-bindings
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/kde-bindings/attachments/20120718/73cd1aa1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 11372 bytes
Desc: not available
URL: <http://mail.kde.org/pipermail/kde-bindings/attachments/20120718/73cd1aa1/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 58622 bytes
Desc: not available
URL: <http://mail.kde.org/pipermail/kde-bindings/attachments/20120718/73cd1aa1/attachment-0003.png>


More information about the Kde-bindings mailing list