[k3b] [Bug 377497] New: No CD 1:1 copie posiblity

Sat Mar 11 14:19:09 UTC 2017

https://bugs.kde.org/show_bug.cgi?id=377497

            Bug ID: 377497
           Summary: No CD 1:1 copie posiblity
           Product: k3b
           Version: 2.0.3
          Platform: openSUSE RPMs
                OS: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: NOR
         Component: Burning/Hardware
          Assignee: k3b at kde.org
          Reporter: rb at knoepfle.de
                CC: michalm at jabster.pl, trueg at kde.org
  Target Milestone: ---

Devices
-----------------------
TSSTcorp CDDVDW SE-S084B TS00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM,
DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung,
DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R,
Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R,
RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen
DVD-Schichten] [%7]

System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.25
QT Version:  4.8.6
Kernel:      4.4.49-16-default

Used versions
-----------------------
cdrecord: 3.1

cdrecord
-----------------------
cdrecord: Die Operation ist nicht erlaubt. Warning: Cannot raise RLIMIT_MEMLOCK
limits.
cdrecord: Nicht genügend Hauptspeicher verfügbar. WARNING: Cannot do
mlockall(2).

!!!!!!!!!!!  It's enave Mem or disk space

cdrecord: WARNING: This causes  a high risk for buffer underruns.
cdrecord: Die Operation ist nicht erlaubt. WARNING: Cannot set RR-scheduler.
cdrecord: Keine Berechtigung. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Insufficient 'file read' privileges. You will not be able to open all
needed devices.
cdrecord: Insufficient 'file write' privileges. You will not be able to open
all needed devices.
cdrecord: Insufficient 'device' privileges. You may not be able to send all
needed SCSI commands, this my cause various unexplainable problems.
cdrecord: Insufficient 'memlock' privileges. You may get buffer underruns.
cdrecord: Insufficient 'priocntl' privileges. You may get buffer underruns.
cdrecord: Insufficient 'network' privileges. You will not be able to do remote
SCSI.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Text len: 324
Cdrecord-ProDVD-ProBD-Clone 3.01 (x86_64-unknown-linux-gnu) Copyright (C)
1995-2015 Joerg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 3
Capabilities   : 
Vendor_info    : 'TSSTcorp'
Identifikation : 'CDDVDW SE-S084B '
Revision       : 'TS00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-R/DL sequential recording 
Profile: DVD-R/DL layer jump recording 
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD-RAM 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R (current)
Profile: CD-ROM 
Profile: Removable Disk 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1962752 = 1916 KB
FIFO size      : 4194304 = 4096 KB
Encoding speed : 905x (67814 sectors/s) for libedc from Heiko Eissfeldt
cdrecord: Die Operation ist nicht erlaubt. rezero unit: scsi sendcmd: fatal
error
CDB:  01 00 00 00 00 00
cdrecord: Die Operation ist nicht erlaubt. Cannot send SCSI cmd via ioctl.
cdrecord: Die Operation ist nicht erlaubt. Cannot open or use SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
pregap1: -1
Track 01: audio  158 MB (15:43.96) no preemp     
Track 02: audio   17 MB (01:46.98) no preemp      pregapsize:   0
Track 03: audio   48 MB (04:50.92) no preemp      pregapsize:   0
Track 04: audio   65 MB (06:31.04) no preemp      pregapsize:   0
Track 05: audio   69 MB (06:51.88) no preemp      pregapsize:   0
Track 06: audio   31 MB (03:05.36) no preemp      pregapsize:   0
Track 07: audio  175 MB (17:20.96) no preemp      pregapsize:   0
Track 08: audio   18 MB (01:48.58) no preemp      pregapsize:   0
Track 09: audio   47 MB (04:43.16) no preemp      pregapsize:   0
Total size:      633 MB (62:42.85) = 282214 sectors
Lout start:      633 MB (62:44/64) = 282214 sectors

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=24 -raw96r
driveropts=burnfree textfile=/tmp/qt_temp.tL7443 -useinfo -audio -shorttrack
/tmp/kde-rb/Marbles In The Park CD 1/Track01.wav /tmp/kde-rb/Marbles In The
Park CD 1/Track02.wav /tmp/kde-rb/Marbles In The Park CD 1/Track03.wav
/tmp/kde-rb/Marbles In The Park CD 1/Track04.wav /tmp/kde-rb/Marbles In The
Park CD 1/Track05.wav /tmp/kde-rb/Marbles In The Park CD 1/Track06.wav
/tmp/kde-rb/Marbles In The Park CD 1/Track07.wav /tmp/kde-rb/Marbles In The
Park CD 1/Track08.wav /tmp/kde-rb/Marbles In The Park CD 1/Track09.wav

-- 
You are receiving this mail because:
You are the assignee for the bug.