[k3b] [Bug 380067] [MATSHITA BD-MLT UJ240AS] :-( unable to WRITE at LBA=6d9a00h: Input/output error

[Thomas Schmitt]

https://bugs.kde.org/show_bug.cgi?id=380067

--- Comment #19 from Thomas Schmitt <scdbackup at gmx.net> ---
Hi,

> :-[ WRITE at LBA=596780h failed with SK=4h/ASC=03h/ACQ=01h]: Input/output error

This is not good news.

SK=4h means "Hardware error". SPC-3 table 27:
"Indicates that the device server detected a non-recoverable hardware
 failure (e.g., controller failure, device failure, or parity error)
 while performing the command or during a self test.

ASC=03h/ACQ=01h is listed in SPC-3 as "NO WRITE CURRENT". No idea what this
shall mean. According to
  http://www.t10.org/lists/asc-num.htm#ASC_03
it is supposed to be emitted by SSC tapes, not by MMC optical drives.
I'd say it indicates a period of drive unconsciousness. This would be
a situation after which one could get the wake-up message from the first
failure in this bug report:
> > :-[ FLUSH CACHE failed with SK=6h/NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED]: Input/output error

This is surely not K3B's fault and very probably not the fault of growisofs.
It rather looks like the drive hates the medium and gets into strange
states while gnawing on it.

It does not happen always. I assume that the shorter burn runs without
Defect Management improve the chance to get done before madness strikes.
But the situation is clearly unstable.

The only proposal i have is to try other media or a different drive.

Have a nice day :)

Thomas

-- 
You are receiving this mail because:
You are the assignee for the bug.