[k3b] [Bug 375095] New: Writing did not complete
edtit5 at mail.ru
edtit5 at mail.ru
Sun Jan 15 16:01:40 UTC 2017
https://bugs.kde.org/show_bug.cgi?id=375095
Bug ID: 375095
Summary: Writing did not complete
Product: k3b
Version: 2.0.3
Platform: Ubuntu Packages
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: NOR
Component: Data Project
Assignee: k3b at kde.org
Reporter: edtit5 at mail.ru
CC: michalm at jabster.pl, trueg at kde.org
Target Milestone: ---
Devices
-----------------------
MATSHITA DVD-RAM UJ8E2 S 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R,
Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW с
ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный
DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16,
RAW/R96P, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 8445 (17295360 bytes)
System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.16
QT Version: 4.8.7
Kernel: 4.4.0-57-generic
Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'DVD-RAM UJ8E2 S '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 262144 = 256 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
Track 01: data 16 MB
Total size: 18 MB (01:52.62) = 8447 sectors
Lout start: 19 MB (01:54/47) = 8447 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 1
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: Ultra High speed Rewritable media (2)
ATIP start of lead in: -11076 (97:34/24)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 16 1T speed high: 16
2T speed low: 8 2T speed high: 24
power mult factor: 4 5
recommended erase/write power: 1
A1 values: 66 4A 99
A2 values: 38 80 00
A3 values: 04 C4 A0
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 351402
Starting to write CD/DVD at speed 16.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Errno: 5 (Input/output error), send opc scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 1D 0E 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 8.711s timeout 60s
/usr/bin/wodim: OPC failed.
Writing time: 8.739s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -tao driveropts=burnfree
-multi -xa -tsize=8445s -
mkisofs
-----------------------
8445
I: -input-charset not specified, using utf-8 (detected in locale settings)
Using _______________________000.DOCX;1 for /Еженедельный доклад-6.docx
(журнал учета передачи информации.docx)
Using _______________________001.DOCX;1 for /журнал учета передачи
информации.docx (Журнал инструктажа о запрете использования сотовых
телефонов.docx)
Using _______________________002.DOCX;1 for /Журнал инструктажа о запрете
использования сотовых телефонов.docx (Акт на уничтожение флешек.docx)
Using ________________________000.DOC;1 for /Временная инструкция по
делопроизводству вместо №170.doc (Методика проверки и оценки состояния режима
секретности, сог.doc)
Using _______________________003.DOCX;1 for /Акт на уничтожение флешек.docx
(ОБРАЗЦОВЫЕ ДОКУМЕНТЫ НА ОБЪЕКТ ВТ.docx)
Using _______________________004.DOCX;1 for /ОБРАЗЦОВЫЕ ДОКУМЕНТЫ НА ОБЪЕКТ
ВТ.docx (частная инструкция АП.docx)
Using _______________________005.DOCX;1 for /частная инструкция АП.docx
(типовая инструкция АП.docx)
Using _______________________006.DOCX;1 for /типовая инструкция АП.docx
(Приказ о назначении ответственного за ЗИ.docx)
Using _______________________007.DOCX;1 for /Приказ о назначении
ответственного за ЗИ.docx (Приказ о закреплении.docx)
Using __________________59313000.DOCX;1 for /Приказ АП 59313-39 185.docx
(Приказ АП 59313-39 о допуске личного состава185.docx)
Using _______________________008.DOCX;1 for /Приказ о закреплении.docx (Приказ
АП о закреплении технических средств.docx)
6.05% done, estimate finish Mon Jan 16 01:54:37 2017
11.84% done, estimate finish Mon Jan 16 01:54:29 2017
17.82% done, estimate finish Mon Jan 16 01:54:26 2017
23.84% done, estimate finish Mon Jan 16 01:54:25 2017
29.71% done, estimate finish Mon Jan 16 01:54:24 2017
35.58% done, estimate finish Mon Jan 16 01:54:23 2017
41.46% done, estimate finish Mon Jan 16 01:54:23 2017
47.52% done, estimate finish Mon Jan 16 01:54:23 2017
53.39% done, estimate finish Mon Jan 16 01:54:22 2017
59.27% done, estimate finish Mon Jan 16 01:54:22 2017
65.14% done, estimate finish Mon Jan 16 01:54:22 2017
71.20% done, estimate finish Mon Jan 16 01:54:22 2017
mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Проект данных
K3b -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL
MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-nikolay/k3bPS3922.tmp -rational-rock -hide-list
/tmp/kde-nikolay/k3bGm3922.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-nikolay/k3bNY3922.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-nikolay/k3beo3922.tmp
mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Проект данных K3b -volset
-appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-nikolay/k3bDF3922.tmp -rational-rock -hide-list
/tmp/kde-nikolay/k3bDj3922.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-nikolay/k3bGx3922.tmp -no-cache-inodes -full-iso9660-filenames
-iso-level 3 -path-list /tmp/kde-nikolay/k3btZ3922.tmp
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the k3b
mailing list