[k3b] [Bug 350918] New: whenever i try to burn sth. cdrecord crashes

[vavatch2309 at gmail.com]

https://bugs.kde.org/show_bug.cgi?id=350918

            Bug ID: 350918
           Summary: whenever i try to burn sth. cdrecord crashes
           Product: k3b
           Version: unspecified
          Platform: Other
                OS: FreeBSD
            Status: UNCONFIRMED
          Severity: normal
          Priority: NOR
         Component: Data Project
          Assignee: k3b at kde.org
          Reporter: vavatch2309 at gmail.com
                CC: michalm at jabster.pl, trueg at kde.org

Devices
-----------------------
ASUS DRW-20B1LT 1.01 (/dev/cd0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW,
DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer
Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW
Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO,
RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite,
Layer Jump] [%7]

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.14.3
QT Version:  4.8.6
Kernel:      10.1-RELEASE-p16

Used versions
-----------------------
cdrecord: 3.1a24

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
SCSI buffer size: 65536
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.01a24 (amd64-unknown-freebsd10.1) Copyright (C)
1995-2014 Joerg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Waiting for data on stdin...
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'ASUS    '
Identifikation : 'DRW-20B1LT      '
Revision       : '1.01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW sequential recording
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-R/DL layer jump recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-RAM 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Profile: Removable Disk 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1310720 = 1280 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  2270 MB        
Total size:     2270 MB = 1162521 sectors
Current Secsize: 2048
Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 1135367
Forcespeed is OFF.
Starting to write CD/DVD/BD at speed 4 in real SAO mode for multi session.
Last chance to quit, starting real write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01:    0 of 2270 MB written.
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 65536
cmd finished after 0.272s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:    6.905s (00:00:06.905)
Average write speed 295.7x.
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable
error
CDB:  5B 01 02 00 00 01 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.078s timeout 480s
Fixating time:    0.151s (00:00:00.151)
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was not used.

cdrecord command:
-----------------------
/usr/local/bin/cdrecord -v gracetime=2 dev=1,0,0 speed=4 -sao
driveropts=burnfree -multi -waiti -xa -tsize=1162521s -


Reproducible: Always

Steps to Reproduce:
1.I commence a compilation by adding files.
2.I hit the burn button
3.The log windows shows I/O errors are occuring, then cdrecord reports crash

Actual Results:  
K3B tells me to file an error report, cdrecord returned an unknown error code
254.

Expected Results:  
It should have burned.

I am running GhostBSD 10.1 with the latest patches.

-- 
You are receiving this mail because:
You are the assignee for the bug.