GCompris on OSX (Mac)

Fri Aug 12 15:08:53 UTC 2016

The config.h is incomplete, it should contains the same macros as
https://github.com/gcompris/GCompris-qt/blob/master/src/core/config.h.in
You have to update it to have the same macros as there is in the above file.
And you need to replace @GCOMPRIS_VERSION_CODE@ by 7000, @ACTIVATION_MODE@
by ON, @BUILD_DATE@ by 160811.

I can fix it in the repo in 3/4 hours I think if you don't manage to do it.

Johnny

2016-08-12 17:05 GMT+02:00 Ütkarsh Tiwari <iamutkarshtiwari at gmail.com>:

> Hi,
>     I think I am doing something wrong here. I'll list all the steps I did
> -
>
> MacOSX build instruction.
>
> copy the following files at the root dir
> cp config.h ../..
> cp gcompris.pro ../..
> cp gcompris.icns ../..
>
> At root dir create the directory
> mkdir rcc
> mkdir translations
>
> And fill copy the appropriate files in them.
>
> Create a build directory:
> mkdir build-macosx
> cd build-macosx
> ~/Qt/5.5/clang_64/bin/qmake -config release ../gcompris.pro
> make
> After the 'make' command I get this error - https://gist.github.com/anonymous/32a792a25556bf1e767d34560847b309
>
> Are there any steps missing in the above instructions?
>
>
> Regards,
>
> Utkarsh Tiwari
>
>
>
>
> On Fri, Aug 12, 2016 at 6:43 PM, Johnny Jazeix <jazeix at gmail.com> wrote:
>
>> Hi,
>>
>> the other way would be to compile using cmake. In the build folder, cmake
>> ../gcompris (put the good path to the gcompris source) will create the
>> Makefile, and then make to compile, followed by ./bin/gcompris to run.
>>
>> Johnny
>>
>> 2016-08-12 15:06 GMT+02:00 B.J. <bj at koupps.net>:
>>
>>> Bet that was it!  Sorry I wasn’t much help…
>>>
>>>
>>>
>>> *From:* Johnny Jazeix [mailto:jazeix at gmail.com]
>>> *Sent:* Friday, August 12, 2016 8:04 AM
>>> *To:* Ütkarsh Tiwari <iamutkarshtiwari at gmail.com>
>>> *Cc:* gcompris-devel at kde.org
>>> *Subject:* Re: GCompris on OSX (Mac)
>>>
>>>
>>>
>>> The config.h is incomplete, it should contains the same macros as
>>> https://github.com/gcompris/GCompris-qt/blob/master/src/core/config.h.in
>>>
>>> Replace @GCOMPRIS_VERSION_CODE@ by 7000, @ACTIVATION_MODE@ by ON,
>>> @BUILD_DATE@ with 160811.
>>>
>>> Johnny
>>>
>>>
>>>
>>> 2016-08-12 14:52 GMT+02:00 Ütkarsh Tiwari <iamutkarshtiwari at gmail.com>:
>>>
>>> Hi,
>>>
>>>     I have installed cmake already. I followed the build procedure
>>> mentioned on this page - https://github.com/gcompris/
>>> GCompris-qt/tree/master/platforms/macosx
>>>
>>>
>>>
>>> Regards,
>>>
>>> Utkarsh Tiwari
>>>
>>>
>>>
>>> On Fri, Aug 12, 2016 at 6:13 PM, Johnny Jazeix <jazeix at gmail.com> wrote:
>>>
>>> Have you run cmake? The config.h (or gcompris-config.h) is supposed to
>>> be created by it.
>>>
>>> Johnny
>>>
>>>
>>>
>>> 2016-08-12 14:18 GMT+02:00 Ütkarsh Tiwari <iamutkarshtiwari at gmail.com>:
>>>
>>> Hi,
>>>
>>>     I don't have 'config.h' file instead I have 'config.h.in' in my
>>> build/src/core/ folder. I tried renaming it as you specified but I got this
>>> error - https://gist.github.com/anonymous/4a952fe0aa85535ba1ce75d5
>>> 18eb3dc6
>>>
>>>
>>>
>>> Regards,
>>>
>>> Utkarsh Tiwari
>>>
>>>
>>>
>>> On Fri, Aug 12, 2016 at 12:01 PM, JAZEIX Johnny <jazeix at gmail.com>
>>> wrote:
>>>
>>> Hi,
>>>
>>> it seems it does not find the good config.h (ours, which is in the build
>>> folder in build/src/core/config.h).
>>>
>>> Can you check if you have this file and if in it there is #define
>>> VERSION_CODE 7000?
>>>
>>> If it is the case, we can try to rename the file to see if it works, you
>>> have it in the following files in src/core:
>>> ./CMakeLists.txt:3:configure_file(config.h.in
>>> "${CMAKE_CURRENT_BINARY_DIR}/config.h" @ONLY)
>>> ./CMakeLists.txt:36:   config.h.in
>>> ./CMakeLists.txt:46:  "${CMAKE_CURRENT_BINARY_DIR}"   # to find config.h
>>> ./ApplicationInfo.h:27:#include <config.h>
>>> ./ApplicationSettingsDefault.cpp:23:#include "config.h"
>>> ./config.h.in:1:/* GCompris - config.h
>>>
>>> I would rename it like (prefix by "gcompris_"):
>>> ./CMakeLists.txt:3:configure_file(config.h.in
>>> "${CMAKE_CURRENT_BINARY_DIR}/gcompris_config.h" @ONLY)
>>> ./CMakeLists.txt:36:   gcompris_config.h.in
>>> ./CMakeLists.txt:46:  "${CMAKE_CURRENT_BINARY_DIR}"   # to find
>>> gcompris_config.h
>>> ./ApplicationInfo.h:27:#include <gcompris_config.h>
>>> ./ApplicationSettingsDefault.cpp:23:#include "gcompris_config.h"
>>> ./config.h.in:1:/* GCompris - gcompris_config.h
>>>
>>> If it works, I'll commit it later.
>>>
>>> Johnny
>>>
>>>
>>>
>>> On 08/12/16 07:25, Ütkarsh Tiwari wrote:
>>>
>>> Hi,
>>>
>>>     I am getting this error while compiling GCompris on OSX
>>> https://gist.github.com/anonymous/32a792a25556bf1e767d34560847b309
>>>
>>>
>>>
>>> Regards,
>>>
>>> Ütkarsh Tiwari
>>>
>>>
>>>
>>> On Fri, Aug 12, 2016 at 1:45 AM, JAZEIX Johnny <jazeix at gmail.com> wrote:
>>>
>>> On 08/11/16 20:25, Ütkarsh Tiwari wrote:
>>>
>>> Hello Mr. Jazeix,
>>>
>>>      I would like to contribute to GCompris. I am on Mac OSX platform. I
>>> was unable to find any tutorial to setup GCompris on Macbooks. Could you
>>> please guide me how to get about it?
>>>
>>>
>>>
>>> --
>>>
>>> Regards,
>>> Ütkarsh Tiwari
>>>
>>>
>>> Hi,
>>>
>>> as Bruno answered you last time, you can try to compile using cmake.
>>>
>>> You have some info at http://gcompris.net/wiki/Qt_Qu
>>> ick_development_process to compile for linux, it should be similar to
>>> compile for mac.
>>>
>>> You need to install cmake, Qt (https://www.qt.io/download-open-source/
>>> for OS X host) and git. Then, you can follow the steps in the link above
>>> (either using QtCreator or in terminal "cmake && make &&
>>> ./bin/gcompris-qt").
>>>
>>> I add the list in cc as some people on it have already compiled for
>>> macOSX.
>>>
>>> If you have issues, feel free to come in the irc channel if it is easier
>>> for you.
>>>
>>> Johnny
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Regards,
>>> Ütkarsh Tiwari
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Regards,
>>> Ütkarsh Tiwari
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Regards,
>>> Ütkarsh Tiwari
>>>
>>>
>>>
>>>
>>
>>
>
>
> --
> Regards,
> Ütkarsh Tiwari
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/gcompris-devel/attachments/20160812/a56c6439/attachment-0001.html>