[FreeNX-kNX] Printing issue - Fedora 11

[Vivek]

Chris,

Thanks for your reply.

 >>What cupsds are running, what ports are they listening to.

1. cupsd
2. /usr/sbin/cupsd -c /home/vivek/.nx/cups/cupsd.conf

They are using two ports  631 and 20000

 >>Did you do the -F patch or was it the distro ???

It came with distro..

 >>What is in /home/vivek/.nx/cups/ppd

iii) No ppd files under  /home/vivek/.nx/cups/ppd/  and No directory 
with name cups under 
/home/vivek/.nx/S-tsrv-co-2011-60D1D093D91A07B88AE13BC8606F9295/

 >>Are you running the cups wrapper on the client ???????

Are you talking about nxcupsd-wrapper script ?. If yes, i did. i have 
changed the variable SYSTEM_CUPSD="/usr/NX/bin/nxclient" and tried it. 
But it didn't work.


Thanks
Vivek

chris at ccburton.com wrote:
>
>
> Vivek <vivek at visolve.com> wrote on 15/10/2009 17:00:02:
>
> > Hello Chris,
> >
> > Thanks for your reply...
> >
> >  >>Check how many cupsd are running on the client.
> >
> > Two process are running...
> >
> > 1. cupsd -C /etc/cups/cupsd.conf
> > 2. /usr/sbin/cupsd -F -c
> > 
> /home/vivek/.nx/C-tsrvco-2004-05F81ABD95CB329C52F9BA1C8247BBD5/cups/cupsd.conf 
>
>
>
> I said on the client !! Not the server !!
>
>
> Did you do the -F patch or was it the distro ???
>
>
> >
> >  >>To which ports are they listening ??
> >
> > port 631, 11004 and two cups.sock process...
> >
> >
> >  >>What is the result of
> >  >>         ls -l
> > /home/vivek/.nx/C-
> > 
> tsrvco-2001-48E7BDCB5AE3C488C3299C1023E618A0/cups//ppd/LaserJet_P2015.ppd
> >  >>or whatever is current . . .
> >
> > No ppd file under  "
> > 
> /home/vivek/.nx/C-tsrv-co-2004-05F81ABD95CB329C52F9BA1C8247BBD5/cups/ppd/ 
>  "
> >
> > But error_log shows " load_ppd: Loading
> > /home/vivek/.nx/C-tsrv-
> > co-2004-05F81ABD95CB329C52F9BA1C8247BBD5/cups//ppd/LaserJet_P2015.ppd.
> > ". ???
> >
> >  >>and
> >
> >  >>        ls -l /home/vivek/.nx/config/ppd/
> >
> > No files... ( This is the problem ??? )
>
> Well, you haven't cached anything from ENABLE_CUPS_SEAMLESS,
> but that's one of the things we're looking at isn't it !!
>
>
> >
> >  >>And the usual questions, are you running selinux iptables etc
> >
> > selinux=disabled and no iptables..
> >
> >
> > Thanks
> > ~Vivek
> >
>
> OK
>
> All on the CLIENT now . . .
>
> What cupsds are running, what ports are they listening to.
>
> What is in /home/vivek/.nx/cups/ppd
>
> All on the CLIENT now . . .
>
>
> Are you running the cups wrapper on the client ???????
>
>
>
> > chris at ccburton.com wrote:
> > >
> > >
> > > Vivek <vivek at visolve.com> wrote on 14/10/2009 20:19:32:
> > >
> > >
> > ________________________________________________________________
> >      Were you helped on this list with your FreeNX problem?
> >     Then please write up the solution in the FreeNX Wiki/FAQ:
> >
> > 
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
> >  
> >          Don't forget to check the NX Knowledge Base:
> >                  http://www.nomachine.com/kb/
> >
> > ________________________________________________________________
> >        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> >       https://mail.kde.org/mailman/listinfo/freenx-knx
> > ________________________________________________________________
> ------------------------------------------------------------------------
>
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
>
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>   
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
>
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________