[FreeNX-kNX] Printing issue - Fedora 11

Vivek vivek at visolve.com
Mon Oct 12 13:21:46 UTC 2009


Chris,

Thanks for your reply...

In the node.conf, ENABLE_CUPS_SEAMLESS=1

And all application shows the printer. If we try to print from any 
applications we get only "recoverable: Network host '127.0.0.1' is busy 
" in the log.

Here are some log info...
-------------------------------------------------------
Setting LaserJet_P2015 device-uri to 
"nxipp://127.0.0.1:12172/printers/LaserJet_P2015" (was "file:///dev/null".)
Printer "LaserJet_P2015" modified by "anonymous".
copy_model: empty PPD file!
Returning IPP server-error-internal-error for CUPS-Add-Modify-Printer 
(ipp://localhost/printers/LaserJet_P2015) from localhost
Try setting the LogLevel to "debug" to find out more.
[cups-driverd] Bad PPD name "/home/ankit/.nx/config/ppd/LaserJet_P2015.ppd"!
Default destination set to "LaserJet_P2015" by "anonymous".
--------------------------------------------

I tried with two different clients Fedora 6 and Fedora 8. But it didn't 
work.

~Vivek

chris at ccburton.com wrote:
>
>
> Vivek <vivek at visolve.com> wrote on 12/10/2009 09:50:41:
>
> > Chris,
> >
> > I am trying to configure the print option on linux-to-linux setup. But
> > it doesn't work. It doesn't show printer type selection message
> > (xmessage).
>
> Are you using ENABLE_CUPS_SEAMLESS=1 on the server  ??  You wouldn't.
>
>  nx session cupsd process is running and all application show
> > the linux client printer. But if we try print, the nx session cups log,
> > the following message repeats..
> >
> > " [Job 1] recoverable: Network host '127.0.0.1' is busy; will retry in
> > 30 seconds... "
> >
>
> Host is busy ?? I've not had that myself.
>
> Can you see the cupsds running on the client.
>
> That's probably where the problem is  . . .
>
>  
> > and one new process will start..
> >
> > "nxipp://127.0.0.1:12170/printers/printer 1 vivek Leafpad job #1 1
> > PageSize=Letter job-uuid=urn:uuid:27e9bc34-2d01-3a9e-6368-9251d48aaf82
> > job-originating-host-name=localhost /
> > /home/vivek/.nx/C-tsrv-
> > co-2170-62D6D243AE355521D691D4052680A63A/cups/spool/d00001-001
> > "
>
> That looks OK . . . .
>
> so
>
> It's spooled locally ( on the server, to the userland cupsd ) and now 
> it re-spooling over the link to the userland cupsd on the client.
>
>
> Does this happen all the time ??
>
>  
> > Share your views..
> >
> > Thanks
> > Vivek
> >
> > ________________________________________________________________
> >      Were you helped on this list with your FreeNX problem?
> >     Then please write up the solution in the FreeNX Wiki/FAQ:
> >
> > 
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
> >  
> >          Don't forget to check the NX Knowledge Base:
> >                  http://www.nomachine.com/kb/
> >
> > ________________________________________________________________
> >        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
> >       https://mail.kde.org/mailman/listinfo/freenx-knx
> > ________________________________________________________________
> ------------------------------------------------------------------------
>
> ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
>
> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>   
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/ 
>
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
> ________________________________________________________________



More information about the FreeNX-kNX mailing list