[FreeNX-kNX] Arch Linux - After reboot have to login 4 times to work ????? (every single time)
Jeremy Wilkins
wjeremy at shaw.ca
Thu Nov 26 21:43:24 UTC 2009
Sorry to sound like a broken record. The correct path is /opt/NX/var/db
Jeremy Wilkins wrote:
>
> Oops need to correct Marcelo on paths though. Your path is /opt/NX/db
>
> Jeremy Wilkins wrote:
>>
>> I agree with Marcelo. It sounds like it is a db file/port conflict. Try
>> these and report back.
>>
>>
>> Marcelo Boveto Shima wrote:
>>>
>>> Hi,
>>>
>>> I can see two possible causes:
>>> 1 - /var/lib/nxserver/db/running/ should be empty after the reboot.
>>> $nxserver --cleanup should clean the directory
>>> 2 - Ports needed by the four session are been used. Set the
>>> DISPLAY_BASE=(last display value + 10) on /etc/nxserver/node.conf.
>>>
>>> Hope this helps.
>>> Regards.
>>>
>>> Marcelo
>>>
>>> On Wed, Nov 25, 2009 at 4:53 PM, yossarianuk <morgancoxuk at gmail.com>
>>> wrote:
>>>>
>>>> Hi.
>>>>
>>>> 100% sure it is not fsck'ing ...
>>>>
>>>> For a start I can always ssh , it also doesn't matter how long I leave
>>>> it -
>>>> I can leave it hours and the result will be the same - fail 4 times,
>>>> then
>>>> success...
>>>>
>>>> After setting SESSION_LOG_CLEAN=0 I have seen the following
>>>>
>>>> [root at winwinwinwin yossarian]# cat
>>>> /home/yossarian/.nx/F-C-winwinwinwin-1000-2EEE03F57CDE5A5295F5B8E24F656371/session
>>>> $DISPLAY is not set or cannot connect to the X server.
>>>>
>>>> xrdb: No such file or directory xrdb: Can't open display ':1000'
>>>> $DISPLAY is
>>>> not set or cannot connect to the X server.
>>>>
>>>> After the 4th attempt it works fine ???
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ChrisB-6 wrote:
>>>>>
>>>>> yossarianuk <morgancoxuk at gmail.com> wrote on 23/11/2009 17:29:56:
>>>>>
>>>>>>
>>>>>> Hi.
>>>>>>
>>>>>> This issue has been going on for at least 4-6 months now...
>>>>>>
>>>>>> I am running latest freenx on archlinux (686)
>>>>>>
>>>>>> It works absolutely fine, until I reboot.
>>>>>>
>>>>>> Then every single time I have to try to login (and fail) 3 times,
>>>>>> then
>>>>> on
>>>>>> the 4th login to works, then anyone can login - freenx will then be
>>>>>> 100%
>>>>>> fine until the next reboot.
>>>>>
>>>>>
>>>>> Are you sure you aren't waiting for fsck etc to finish ??
>>>>>
>>>>>>
>>>>>> Can anyone think of ANYTHING I can do to stop this happening ??? It
>>>>>> is
>>>>>> really annoying,
>>>>>>
>>>>>> I did raise a post about this several months ago, I followed advice
>>>>>> at
>>>>> the
>>>>>> end, it still happens.
>>>>>>
>>>>>> (old post : http://markmail.org/message/44j3xah7v6hzlezv )
>>>>>>
>>>>>> Here is an example fail.
>>>>>>
>>>>>> ====================================
>>>>>> Display Type Session ID Options
>>>>>> Depth
>>>>>> Screen Status Session Name
>>>>>> ------- ---------------- -------------------------------- --------
>>>>>> -----
>>>>>> -------------- ----------- ------------------------------
>>>>>>
>>>>>>
>>>>>> NX> 148 Server capacity: not reached for user: yossarian
>>>>>> NX> 105 startsession --link="adsl" --backingstore="1"
>>>>>> --encryption="1"
>>>>>> --cache="16M" --images="64M" --shmem="1" --shpix="1" --strict="0"
>>>>>> --composite="1" --media="0" --session="Gateway" --type="unix-kde"
>>>>>> --geometry="1280x976" --client="linux" --keyboard="pc105/gb"
>>>>>> --screeninfo="1280x976x24+render"
>>>>>>
>>>>>> NX> 1000 NXNODE - Version 3.2.0-73 OS (GPL, using backend: 3.3.0)
>>>>>> NX> 700 Session id: gtfo-1000-ED28A41DC35814F52C6DE05FDE72D8AE
>>>>>> NX> 705 Session display: 1000
>>>>>> NX> 703 Session type: unix-kde
>>>>>> NX> 701 Proxy cookie: 8b4424fcb9928f98bad143bae200b63b
>>>>>> NX> 702 Proxy IP: 127.0.0.1
>>>>>> NX> 706 Agent cookie: 8b4424fcb9928f98bad143bae200b63b
>>>>>> NX> 704 Session cache: unix-kde
>>>>>> NX> 707 SSL tunneling: 1
>>>>>> NX> 105 /opt/NX/bin/nxserver: line 1531: 2161 Terminated sleep
>>>>>> $AGENT_STARTUP_TIMEOUT
>>>>>
>>>>> no agent
>>>>>
>>>>>
>>>>>
>>>>>> NX> 596 Session startup failed.
>>>>>> NX> 1004 Error: NX Agent exited with exit status 1. To troubleshoot
>>>>>> set
>>>>>> SESSION_LOG_CLEAN=0 in node.conf and investigate
>>>>>>
>>>>> "/home/yossarian/.nx/F-C-gtfo-1000-ED28A41DC35814F52C6DE05FDE72D8AE/session".
>>>>>
>>>>> Did you do this ?? What did it say ??
>>>>>
>>>>>> You might also want to try: ssh -X myserver; /opt/NX/bin/nxnode
>>>>>> --agent
>>>>> to
>>>>>> test the basic functionality. Session log follows:
>>>>>> Can't open
>>>>>> /opt/NX/var/db/running/sessionId{ED28A41DC35814F52C6DE05FDE72D8AE}:
>>>>>> No
>>>>> such
>>>>>> file or directory.
>>>>>> mv: cannot stat
>>>>>> `/opt/NX/var/db/running/sessionId{ED28A41DC35814F52C6DE05FDE72D8AE}':
>>>>>> No
>>>>>> such file or directory
>>>>>> NX> 1006 Session status: closed
>>>>>> NX> 280 Exiting on signal: 15
>>>>>>
>>>>>> ====================================
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> View this message in context: http://old.nabble.com/Arch-Linux---
>>>>>> After-reboot-have-to-login-4-times-to-work-------%28every-single-
>>>>>> time%29-tp26482511p26482511.html
>>>>>> Sent from the freenx-knx mailing list archive at Nabble.com.
>>>>>>
>>>>>> ________________________________________________________________
>>>>>> Were you helped on this list with your FreeNX problem?
>>>>>> Then please write up the solution in the FreeNX Wiki/FAQ:
>>>>>>
>>>>>>
>>>>> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>>>>>>
>>>>>> Don't forget to check the NX Knowledge Base:
>>>>>> http://www.nomachine.com/kb/
>>>>>>
>>>>>> ________________________________________________________________
>>>>>> FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>>>>>> https://mail.kde.org/mailman/listinfo/freenx-knx
>>>>>> ________________________________________________________________
>>>>>
>>>>> ________________________________________________________________
>>>>> Were you helped on this list with your FreeNX problem?
>>>>> Then please write up the solution in the FreeNX Wiki/FAQ:
>>>>>
>>>>> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>>>>>
>>>>> Don't forget to check the NX Knowledge Base:
>>>>> http://www.nomachine.com/kb/
>>>>>
>>>>> ________________________________________________________________
>>>>> FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>>>>> https://mail.kde.org/mailman/listinfo/freenx-knx
>>>>> ________________________________________________________________
>>>>>
>>>>
>>>> --
>>>> View this message in context:
>>>> http://old.nabble.com/Arch-Linux---After-reboot-have-to-login-4-times-to-work-------%28every-single-time%29-tp26482511p26518302.html
>>>> Sent from the freenx-knx mailing list archive at Nabble.com.
>>>>
>>>> ________________________________________________________________
>>>> Were you helped on this list with your FreeNX problem?
>>>> Then please write up the solution in the FreeNX Wiki/FAQ:
>>>>
>>>> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>>>>
>>>> Don't forget to check the NX Knowledge Base:
>>>> http://www.nomachine.com/kb/
>>>>
>>>> ________________________________________________________________
>>>> FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>>>> https://mail.kde.org/mailman/listinfo/freenx-knx
>>>> ________________________________________________________________
>>>>
>>> ________________________________________________________________
>>> Were you helped on this list with your FreeNX problem?
>>> Then please write up the solution in the FreeNX Wiki/FAQ:
>>>
>>> http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FAQ
>>>
>>> Don't forget to check the NX Knowledge Base:
>>> http://www.nomachine.com/kb/
>>>
>>> ________________________________________________________________
>>> FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>>> https://mail.kde.org/mailman/listinfo/freenx-knx
>>> ________________________________________________________________
>>>
>>>
>>
>>
>
>
--
View this message in context: http://old.nabble.com/Arch-Linux---After-reboot-have-to-login-4-times-to-work-------%28every-single-time%29-tp26482511p26535265.html
Sent from the freenx-knx mailing list archive at Nabble.com.
More information about the FreeNX-kNX
mailing list