[FreeNX-kNX] Timing Out

[Andrew Villano]

My client connects to FreeNX servers on a different subnet (of which are
on the same subnet). 

 

I can telnet to the server in question and connect instantaneously. They
key is the same.

 

The only delay in logging on in SSH is after entering credentials, the
delay lasts about 45 secs.

 

I was using the same user accounts on all attempts.

 

Warmest Regards,

 

Andrew Villano

Systems Specialist

Incentient LLC

________________________________

From: chris at ccburton.com [mailto:chris at ccburton.com] 
Sent: Thursday, August 20, 2009 3:31 AM
To: User Support for FreeNX Server and kNX Client
Subject: Re: [FreeNX-kNX] Timing Out

 



Andrew Villano <AVillano at incentient.com> wrote on 19/08/2009 20:26:33:

> Linux client connects within a few seconds. 
>   
> Same network route. 
>   
> I can connect with the same windows client to other linux machines 
> on the same subnet (with identical configurations). The linux CLIENT
> was on the SAME subnet though. 
>   
> 1)       Copied the key several times, its identical 
> 2)       I don't know what routing issue there could be, the ssh 
> port is forwarded to the machine 
> 3)       I'm using putty to connect to the machine and I'm currently
> connected fine. 
>   
> Very strange.... 


OK 

Your client connects to FreeNX servers on the same subnet, but not to
the server in question on a different subnet, though it has done
previously, but taking a minute to log in. 

You can however telnet to the server on a different subnet using putty.
Is the connection instantaneous ?? 

A linux client on the same subnet as the server in question can connect
instantly using FreeNX. 

The key on the windows client is the same as the key on the linux
client. 




If you telnet to the sshd port ( 22 default ) on the server from the
windows machine you should get an ssh prompt instantly 

SSH-2.0-OpenSSH_x.y  or whatever. If it takes a minute or so then that
would be something to look at  . . . 



When tou were connecting using the linux client from the same subnet as
the server, were you using the same user account or does the problem
move following user accounts ?? 


>   
> Warmest Regards, 
>   
> Andrew Villano 
> Systems Specialist 
> Incentient LLC 
> 
> From: chris at ccburton.com [mailto:chris at ccburton.com
<mailto:chris at ccburton.com> ] 
> Sent: Wednesday, August 19, 2009 3:15 PM
> To: User Support for FreeNX Server and kNX Client
> Subject: Re: [FreeNX-kNX] Timing Out 
>   
> 
> 
> Andrew Villano <AVillano at incentient.com> wrote on 19/08/2009 19:37:03:
> 
> > I can get a full working session from a linux client. 
> >   
> 
> Right, server and keys working then. How long does the Linux client 
> take to connect. 
> 
> Is this over the same network route . . . 
> 
> 
> > I can connect with the windows client to clients on the same IP. 
> 
> How do you mean?? Client software to client software ?? 
> 
> >   
> > I got the hello nxserver prompt from ssh. 
> 
> We know it works from Linux. 
> 
> 
> In order I would look at 
> 
> key mismatch on the windows machine 
> 
> routing issue windows client to server - timeouts or filtering on 
> the server or packets going two ways 
> 
> windows software issue -  try a windows ssh client   eg  http:
> //sshwindows.sourceforge.net/  or just re-install the windows client 
> 
> 
> 
> 
> 
> >   
> > Warmest Regards, 
> >   
> > Andrew Villano 
> > Systems Specialist 
> > Incentient LLC 
> > 
> > ________________________________________________________________
>      Were you helped on this list with your FreeNX problem?
>     Then please write up the solution in the FreeNX Wiki/FAQ:
> 
>
http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_FA
Q
<http://openfacts2.berlios.de/wikien/index.php/BerliosProject:FreeNX_-_F
AQ> 
>   
>          Don't forget to check the NX Knowledge Base:
>                  http://www.nomachine.com/kb/
<http://www.nomachine.com/kb/>  
> 
> ________________________________________________________________
>        FreeNX-kNX mailing list --- FreeNX-kNX at kde.org
>       https://mail.kde.org/mailman/listinfo/freenx-knx
<https://mail.kde.org/mailman/listinfo/freenx-knx> 
> ________________________________________________________________ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.kde.org/pipermail/freenx-knx/attachments/20090820/060ed5e8/attachment.html>